Life Span Workplace DT-3 User manual

Treadmill
Owner’s Manual
DT3
Treadmill Base
Owner’s Manual
TR1200B, TR5000B

TableofContents
3
Welcome
Getting Started
Welcome 4
Warranty
Registration
Safety
Treadmill Base 11
Specifications
Unique Features
Maintenance
Assembly Instructions
Treadmill Desk Operations 21
Specifications
Console Overview
Starting the Treadmill Desk
Innovative Features
Troubleshooting
Personal Settings
Display Detail

Welcome
4
Congratulations onchoosing the LifeSpan Workplace™ line of products.These
products give you the opportunity to remain productive while taking care of
yourselfasyouintegratemovementwithnormallysedentarytasks.
The average American now spends eleven hours, five days a week, sitting, and
burns one-hundred fewer calories each day than they did a few decades ago.
Sitting for long periods slows your metabolism, reduces calories burned, and
increases your risk for heart disease and diabetes.
Whether you plan on placing this product in a TV room, replace your desk at
home or are adding another workspace in the office, LifeSpan Workplace™
products are a great way to add movement to an otherwise sedentary activity.
Before you assemble or operate your product, please read this manual
thoroughly. Important information, including safety precautions, ongoing
product maintenance, assembly instructions, and information on proper
operation are included.
Neither LifeSpan Fitness nor its representatives can accept responsibility for any damagesor
injury incurred as a result of information presented in this manual except under the terms
of the product warranty.

5
Registration
Your LifeSpan treadmill desk comes with the following limited warranty valid
in North America and the United Kingdom.
Warranty
DT3
Parts
2 Years
Warranty –Treadmill
TR1200B
TR5000B
Treadmill Frame
Lifetime
Lifetime
Motor
3 Years
3 Years
Parts
2 Years
2 Years
Labor
1 Year
1 Year
LifeSpan warrants the equipment it manufactures is free from defects in
materials and workmanship under normal use and services. The periods above
are based on the date of purchase. During these periods, LifeSpan will repair
or replace any defective part. Free labor is included on all parts that are not
normally assembled or replaced by the customer within the labor period.
LifeSpan reserves the right to make changes and improvements to our products
without incurring any obligations tosimilarly alter any product purchased.
In order to insure our product warranty and to ensure the safe and efficient
operation of your LifeSpan product, only authorized parts can be used. The
warranty is void if any parts other than those provided by LifeSpan are used.
Exclusions and Limitations:
• This warranty does not apply to any defects caused by negligence, misuse,
improper assembly, or maintenance, accident, or “act of God.”
• This warranty does not apply to discoloration of paints or plastics.
• LifeSpan shall not be responsible for incidental or consequential damages.
• This warranty is non-transferable form the original owner.

6
Warranty
Proper Grounding
LifeSpan equipment must be grounded. Improper connection of the
equipment’s grounding conductor can result in the risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided
with the product or use a ground plug adapter to adapt to a non-grounded
outlet. If the plug will not fit inthe outlet, have the proper outlet installed by a
qualified electrician.
Power Cord Options
This treadmill should only be used with the proper power cord and power
outlet. Several power cord options (shown below) are available from LifeSpan.
We do our best to include the correct power cord with the treadmill for your
area. In the event that the correct power cord is not included in the packaging
please contact your local distributor.
Treadmill Outlet PowerCordOptions
Do not use extension cords between the treadmill and power outlet.
Do not plug into a GFI outlet or circuit as it may trip the breaker.
SWITCH- OVERLOAD
CORD SOCKET AC POWER SWITCH
!
!

7
SafetyFirst
When using active workstations, basic precautions shouldalways befollowed,
including:
• Never drop or insert any object into any opening. If an object falls into an
opening, turn the power off and unplug the power cord from the outlet.
• Never operate this treadmill if it has been damaged or partially
submersed in water.
• To reduce the risk of electric shock, unplug the treadmill from the wall
outlet when not in use, before performing any maintenance, or before
moving the treadmill.
• Do not use outdoors or in areas of high humidity or extreme temperature
changes.
• Do not operate where aerosol spray products are being used or where
oxygen is being administered.
• Never place the power cord under carpeting or place any object on top
of the cord, this may pinch or damage the cord causing fire damage or
personal injury.
• Use this product for its intended use as described in this Owner’s Manual.
Do not use attachments that are not recommended by LifeSpan.
• Do not leave your treadmill running while not in use.
Children and Pets
• Keep children from playing on your treadmill at all times.
• When in use children and pets should be kept at least 10 feet (3m) away.
• This treadmill can be used by children ages 12 years and above and
persons with reduced physical, sensory or lack of experience and
knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children without
supervision.

8
SafetyFirst
Safety Tips While in Use
• Always consult a physician before beginning anexercise program.
• If you experience chest pains, nausea, dizziness or shortness of
breath, stop exercising immediately and consult your physician before
continuing. Do not wear clothing or jewelry that might catch on any
partof thetreadmill.
• Wear shoes with high traction rubber soles. Do not wear shoes with
heels, leather soles, cleats or spikes.
• Do not walk or run backwards on the treadmill, always face forward.
• Allow the running belt to fully stop prior to getting off the treadmill.
• Make sure the area behind the treadmill remains completely clear
during use. A minimum of 3 feet (1m) of clearance is required for safety
reasons.
Note: Read all instructions and save for future reference.
Safety Clearance

SafetyFirst
12
Treadmill Base
TR1200B, TR5000B

11
About YourTreadmill Base
Specifications
TR1200B
TR5000B
Speed Range
0.4 - 4.0 mph (0.6 - 6.4 kph)
Walking Belt Size
20" x 50" (51 cm x 127 cm)
Roller Size
Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm)
Deck
1" (2.5 cm) Phenolic Deck
Deck Suspension
6 Independent Compression Shocks
Drive Motor
3.0 HP Continuous Duty
Max User Weight
400 lbs. (182 kg)
Speed Range
0.4 - 4.0 mph (0.6 - 6.4 kph)
Walking Belt Size
20" x 50" (51 cm x 127 cm)
Roller Size
Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm)
Deck
3/4" (1.9 cm) Phenolic Deck
Deck Suspension
6 Independent Compression Shocks
Drive Motor
2.25 HP Continuous Duty DC
Max User Weight
350 lbs. (159 kg)

About YourTreadmill Base
13
Unique Features
As a leader in the active workstations, LifeSpan has developed a number of
unique features in our treadmills making them more engaging, safer and
easier to use. Learn more about how to use these features in the Saving Your
Results and Personal Settings sections of this Owner’s Manual.
Intelli-Guard™
Walk confidently knowing your safety is assured with Intelli-Guard™.
Step away from your treadmill for more than twenty seconds and your
treadmill’s belt will automatically glide to a smooth stop.
Intelli-Step™
Never miss a stride with Intelli-Step™. Your steps are automatically
calculated with meticulous precision, displaying immediate feedback
and historical trends via your Club account.
Club Membership
Every treadmill comes with a full membership in the Club, LifeSpan’s
award-winning health and fitness software. Keep track of all your
activity and information in one secure location.

14
Maintenance and Tips
Daily Cleaning
It is recommended to wipe the treadmill down after each use to keep the
treadmill clean and dry. A mild detergent may be used at times to help
remove all dirt and salt from the belt, painted parts and the display.
Monthly Cleaning
This cleaning includes removing the motor cover and cleaning around the
motor and electronics. Itis recommended to clean the motor compartment if
the treadmill is inan area where there might be plush carpet fibers that could
get pulled up into the motor compartment. It is a good idea at this time to
tighten all assembly hardware and check power cord for damage, or anything
else that would indicate the need for service.
Safety and Integrity
The safety and integrity designed into the machine can only be maintained
when the treadmill is regularly examined for damage and repaired. Worn
or damaged components shall be replaced immediately or the treadmill
be removed from service until the repair is made. Pay special attention to
components most susceptible to wear.
WARNING: Keep treadmill stable on flat ground.
WARNING: Unplug the power cord before removing the motor cover.
IMPORTANT: If service is required, turn the power off and remove the
power cord to ensure the unit cannot be used. Let all other users know
the treadmill needs service.
CAUTION: Acidic cleaning detergents may damage painted or powder
coated surfaces and should not be used. Such cleaners may void the
LifeSpan warranty.
!
!

15
Maintenance and Tips
Belt Lubrication
Use only 100% silicone and avoid using aerosol silicone sprays which include
additives and petroleum distillates. One ounce of silicone should be used for
each application. LifeSpan offers 100% silicone lubricant.
The walking belt comes pre-lubricated from the factory. The TR1200B should
be lubricated every 50 hours of use. The TR5000B comes with a maintenance
free belt and doesn’t require lubrication.
To lubricate, unplug your TR1200B. Slide your hand under the belt and lift the
belt away from the deck. Apply about a dozen sprays toward the center of the
belt from each side. Rotate the belt 1/3 and repeat this application. Rotate
another 1/3 and repeat once more. Plug the treadmill in and walk for a few
minutes to disperse lube evenly.
For a full video
demonstration
on lubricating your
treadmill go to
https://goo.gl/5KrRaK.
NOTE : When lubricating the belt, make sure the treadmill is on a surface
that can be easily cleaned. After lubricating clean any excess silicone off
the walking surface of the belt and side rails.

16
Maintenance and Tips
Belt Tensioning
If the belt begins to slip and needs to be tensioned, tension bolts are
accessible from the back of the treadmill. Before tensioning the belt, start the
treadmill and set the speed to 3 mph (5 kph).
A. Using a 6 mm Allen wrench, included in your hardware bag, turn the
right and left tension bolts 1/2 turn clockwise.
B. Test to see if the slipping is eliminated. If the belt slips repeat step A and
test again.
CAUTION: DO NOT tighten more than 2 full turns on each side.
Over tensioning the belt can cause unnecessary friction and wear
and tear on the belt, motor and electronics.
Belt Alignment
A. Press Start, then increase the treadmill speed to 3 mph (5 kph).
B. Stand behind the treadmill to see which way the belt is drifting.
C. If the belt drifts to the left, turn the left adjustment bolt 1/4 turn
clockwise and the right adjustment bolt 1/4 turn counter-clockwise.
(See FIG. 1)
D. If the belt drifts to the right, turn the left adjustment bolt 1/4 turn
counter-clockwise and the right adjustment bolt 1/4 turn clockwise.
(See FIG. 2)
E. Observe the alignment for two minutes. Repeat steps A-D as needed.
Note: Adjusting one side more than the other will cause the belt to
drift to the side of the treadmill and will require belt alignment. Check
to be sure the running belt is still aligned. If belt alignment is off as
shown below, refer to Belt Alignment section.
Turn both
Clockwise
to Tighten belt
Turn both
Counter-clockwise
to Loosen belt

17
Maintenance and Tips
Belt Alignment (continued)
Moving the Treadmill Base
1. Make sure the ON/OFF switch is turned OFF and the power cord is
unplugged from the wall.
2. Make sure nothing is on or near your treadmill which might spill, be
knocked off, or prevent the treadmill from moving.
3. Place both hands under the support bar located under the back of the
walking belt to make sure you have a solid lifting point.
4. Lift the back of the treadmill and roll to the desired location.
CAUTION: When lifting, use proper safety precautions and lifting
techniques. Bend your knees and elbows, keep your back straight
and lift evenly with both arms.
To move belt to the Right
Figure 1
To move belt to the Left
Figure 2

18
Treadmill DeskConsoleOverview &Specifications
After assembling the treadmill, roll it to the desired location. Plug the console
connector into the connector coming from the front of the treadmill. Be sure
to screw the two connectors together with the attached thumb screws.
Safety Key
When using the DT-3 with a treadmill
use Safety Key (F).
F
console port
on/off switch
power receptacle
NOTE:
Do not plug the power cord into the equipment until the
console isconnected.

Treadmill DeskConsoleOverview &Specifications
22
MECHANICS & PERFORMANCE
TREADMILL DESK
CONSOLE
TREADMILL DESK
Console Power Buttons
1. Start/On: If the console is in deep sleep mode, press and hold this button
for three seconds to turn the console on. Once the console is turned on
press to start the treadmill.
2. Stop/Reset: Pauses the treadmill. If pressed for one second, resets the
console (all data readouts are reset to zero). After resetting console will
go into "sleep mode" after 10 minutes.
3. Preset: Defaults to 1.5 mph / 2.4 kph, or to a custom speed that can be
adjusted in Personal Settings.
4. : Increases or decreases speed.
5. Enter/Mode: Changes the data readout between Time (the default),
Step, Calories, Distance and Speed. Press and hold for one second to
automatically cycle through readouts every five seconds; press again to
stop this automatic change.
Readouts
Display
Buttons
Time, Steps, Calories,
Distance, Speed
LED
On/Start, Stop/Reset, Speed Pre-Set,
Speed Up/Down, Enter Mode
0.4 - 4.0 mph*
0.6 - 6.4 kph
12.5" W x 3"D x 2"H
32cm W x 7.6cm D x 5.1cm H
* Can be changed to max speed of 2 mph/3.2 kph in personal setting
2
5
4
1
3
Speed Range
Dimensions

23
TreadmillDeskConsole Overview
Starting the Treadmill Desk
1. Turn the power switch on. It is located on the front right corner of the
treadmill.
2. The current user weight will be flashing on the display panel. Adjust your
weight to obtainaccurate caloriecalculations.
3. Make sure the safety key is engaged in the console.
4. Press the Start button to start the treadmill belt. The console will start
counting up from 0:00.
5. Press the buttons to adjust speed, or use the Preset key to go directly
to your preferred speed (which defaults to 1.5 mph). See the separate
section on Preset, as well as the section on Settings, for more details.
Treadmill Desk Innovative Features
Intelli-Step
TM
–LifeSpan treadmill desks come with Intelli-Step our exclusive
step counting feature that senses each time your foot lands on the walking
belt and counts your step total on the display console. If you’re in the habit of
counting daily steps or want to incorporate a daily or weekly step count goal
this feature will provide more accurate step counting than using a smartwatch
or other wearable step counting device on your wrist. Accuracy does require
that the treadmill desk is able to detect your steps and will be less accurate
for those who walk lightly including those individuals under a 100 pounds
(45.5KG).
NOTE : The display will show "–––" if the Safety Key is not engaged.
NOTE:
The steps are counted normally from 1 to 9,999 steps. After 9,999
steps, the display format changes to accommodate more than four
digits. Take the number shown in the display and add a zero to the
right for the correct number of steps.
Below are examples of what the display will read and what those
numbers mean:
1001 = 10,010 steps
1005 = 10,050 steps
1100 = 11,000 steps

24
TreadmillDeskConsole Overview
Intelli-Guard™ - This unique safety feature is engaged when the treadmill belt
speed reaches 1.0 MPH (1.6 KPH) or faster and automatically pauses the belt
20 seconds after you stop walking, ensuring that no one else steps on the
treadmill desk without noticing that its already running. When Intelli-Guard
senses that the treadmill is no longer being used, after 20 seconds the audible
beep will first notify you that the treadmill belt is going to pause. This feature
can be controlled in Personal Settings.
Personal Settings –there are several features that can be set using our
Personal Settings feature to tailor LifeSpan treadmill desks to your specific
preferences. These include:
• Maximum Speed : Select 2mph (3.2kph) or 4mph (6.4 kph)
maximum speed options.
• Intelli-Guard Selection : On / Off setting
• Resume Speed: after pressing pause and returning to the treadmill
desk the default belt speed will be .4 mph (.6 kph) which is the
normal starting speed. The resume starting speed can be modified
to default toreturn tothe previous speed.
In addition, the following features are applicable to treadmill desk users.
• Audible Safety Beep : On / Off setting. Each time the control buttons
on the console are depressed an audible beep is used as an alert
that a change was made. This is designed to prevent accidental
speed adjustments being made without users being aware that they
may be accidentally depressing a button.
• Metric versus Standard Readouts: Change the display readouts for
speed and distance to Metric or back to standard readouts.
• Charging Port : This port can be used to charge your wireless mobile
devices.
NOTE : You will not be able to save your workout data to a USB via
this port; it isused for charging purposes only.