Life Span LS Series User manual

LS-3T LS-5T
LS-7T
Important Safety and
User Instructions .....................1
Assembly Instructio sn
......................3
Console Operation
LS-3T / LS-5T ................................6
LS-7T..............................................8
Preset Program
LS-3T / LS-5T ................................10
LS-7T..............................................11
Maintenance .................................12
Warranty .......................................14
Congratulations on the purchase of your new motorized treadmill. To help ensure an enjoyable
and trouble-free operation of your new treadmill, we strongly suggest you read this manual carefully
and follow its recommendations.
Table of Contents

1
FRONT
TOP
VIEW
2000mm
4FEETMIN
RIGHT
SIDE
LEFT
SIDE
1000mm
2FEETMIN
1000mm
2FEETMIN
This product must be grounded. If it is malfunctioning or it breaks down,
grounding provides the path of least resistancefor the electrical current
to reduce the risk of electrical shock. This treadmill is equipped with a
cord having equipment grounding connector and agrounding plug.The
plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the treadmill grounding connector can result in
the risk of electrical shock. Check with a qualified electrician, if you are in
doubt as to whether the product is properly grounded. Don’t modify the
plug provided withthe treadmill. If it won’t fit your outlet, have a properly
grounded outlet installed by a qualified electrician.
WARNING
Never useextension cords between the treadmill and the wall outlet.
If there is any damage tothe cables, please contact the service center.
Partsshould be replaced by an authorized technician.
DANGER
To reduce the risk of electrical shock, always
unplug this appliance from the electrical outlet before cleaning.
♦ Usethis applianceonly for itsintended use as described in this manual.
♦ Do not useattachments not recommended by the manufacturer.
♦ To disconnect, turn all the controls tothe off position, then remove the
plug from the outlet.
♦ Connect this appliance toa proper grounded outlet only.
See Grounding Instructions.
♦ This appliance is intended for household use.
♦ When you are not going to use your treadmill, or when finished, please
remove the safety key from the console.Then always place the safety
key where children can not reach.
♦ Do not useoutdoors.
♦ Always unplug the treadmill from the outlet before cleaning,
assembling or servicing.
♦ Never leave treadmill unattended when plugged in. Disconnect by
turning off the master power switch and unplug from the outlet.
♦ Never operate this treadmill if it has any damage tothe lead or plug.
Also if it is not operating correctly, has been dropped, damaged or if it
has been exposed to water.
♦ Do not operate where aerosol products are being used or where
oxygen is being administered.
♦ Don’t pull the treadmill by itspower cord or usethe cord as a handle.
♦ Keep closesupervision if the treadmill is being used by or near
children, persons with disabilities or pets.
♦ Keep dry. Do not operatethis treadmill in wet or moist conditions.
♦ Never insert any objectsintoany openings.
♦ To prevent injuries, always warm up your muscles before using the
treadmill.
♦ Always attachthe safety key clip toyour clothing before inserting
safetykey. Always wear safety key in caseof an accident.
♦ MAX user weight: Pleaserefer tothe maximum user weight
information on the treadmill before using.
♦ Keep electrical cord away from heated surfaces.
♦ Keep hands clear of all moving parts. Never place hands or feet under
the treadmill.
♦ Each time you use the treadmill, check that the running belt is aligned
and centered on the treadmill base and all visible fasteners on the
treadmill are sufficiently tightened and secured.
♦ Be sure that the area around the treadmill remains clear during use and
has adequate clearance. Keep the treadmill on asolid, level surface.
At least 1000 mm/2 feet from any wall on either side.
NOTE:
Failure to follow this instruction may lead to personal injury or injury to
others. It could also cause damage to the treadmill. To reduce the risk of
burns, fire or electric shock, please follow these instructions.
IMPORTANT SAFETY INSTRUCTIONS
ELECTRICAL GROUNDING INSTRUCTIONS
GROUNDING
PIN
GROUNDED
OUTLET
Figure
Grounding methods

2
USER PRECAUTIONS
♦ Always stretch your muscles before commencing any exercise
program. Warm up slowly by walking at a slow speed. Increase
workout intensity gradually until you reach your desired workout
pace. Decrease workout intensity gradually to an easy walk.
Allow your heart rate to decrease to a normal rate.
♦ When starting the treadmill, always stand with both feet on the
side rails.
♦ When finishing, allow the running belt to slow down and come to
a complete stop before stepping off.
♦ Wear comfortable nonrestrictive clothing when using the
treadmill. Never wear anything loose, such as baggy sweat
pants, necklaces, loose socks or jewelry. Never drape towels on
or around the treadmill during use.
♦ Always use the handrail when stepping on or off the treadmill
and when changing incline or speed.
♦ This treadmill is equipped with a safety key – Always clip the
cord attached to the safety key to a part of your clothing so the
safety key will properly detach from the console, therefore
stopping the treadmill.
♦ Wear running or walking shoes with high traction soles. To avoid
injury and unnecessary wear on your treadmill, be sure your
shoes are free of any debris such as gravel or small rocks.
If you feel dizzy, nausea, chest pain or other abnormal symptoms,
STOP immediately. Consult a physician before continuing use.
Before completing an exercise
session always...
1. Allow time to slow your pace, cool down, reduce your hear rate
to a normal level before completing your workout.
2. Grasp the handlebars and press the speed “
>
” button. Slow
your pace to an easy walk.
3. Ensure the running belt has come to a complete stop before
exiting the treadmill.
WARNING
Turn off and unplug the treadmill before proceeding with any
maintenance or visual inspections. Failure to do so may result in
serious injury.
NOTE: Failure to perform this required periodic and
preventative maintenance can void your warranty.
At the end of every exercise
session always...
1. Remove the safety key from the console.
2. Use the master power switch to turn the treadmill off. The master
power switch is located on the right-hand side of the frame, next
to the power cord.
3. Always position and store the electrical cord where it is clear of
all pathways.
4. Unplug the electrical cord from the outlet. This is especially
important if you are not going to use your treadmill for extended
time period.
5. Wipe all treadmill surfaces with a dry cloth or towel especially
perspiration on the handlebars, control panel, running belt or any
other treadmill components.
Read the following carefully before using your treadmill
WARNING

M5(1PCS) M6(1PCS)M8*70L(4PCS)
31
35
33
30
31
34
32
M8*45L(4PCS) M4*10L(4PCS) M8*15L(2PCS) M8(2PCS) #8*15L(4PCS)
30 31
7. Frame
8. Support post - left
9. Support post - right
10. Base frame
13. Console.
14. Complete handlebar set
15. Locking knob for folding
16. Safety key
17. PCB cable middle
18. Hand pulse cable lower
19. PCB cable upper
20. Hand pulse cable lower
21. PCB cable middle
22. PCB cable lower
23. Base frame screws x 4
24. Handlebar screws x 4
25. Console screws x 4
26. Elevation block.
27. Console bracket.
28. Screws for console position
adjustment
29. Washers for console position
adjustment
30. Water bottle screws x 2
31. Handrail decorating screws x 2
32. Water bottle rack
33. Water bottle holder
34. Handrail decorating cover left
35. Handrail decorating cover right
3
ASSEMBLY INSTRUCTIONS
Parts
Hardware
Screws already in place on the treadmill:
Screws in the plastic bag: Tools:
After unpacking the fitness equipment, examine it carefully for possible damage. If there is any damage or there are missing parts,
please contact your retailer or an authorized repair facility for assistance.
1. Since your treadmill is a heavy piece of equipment, we recommend that after removing the box top, you slit the corners of the lower
carton and fold down the sides. This will eliminate the need to pick the treadmill over the sides of the box.
2. Prior to starting the assembly process take all the parts out of the box, remove all plastic bags, and lay them out on the floor to
become familiar with the components. Make sure that you remove all parts packaged underneath the treadmill. You may need to
slightly pick the back of the treadmill up to get better access to the parts on the bottom. You will notice that the treadmill is completely
assembled except for the handle bars and the display window. ( See FIG.1 of page 5)

32
31
30
30
M5(1PCS) M6(1PCS)M8*70L(4PCS)
M8*45L(4PCS) M4*10L(4PCS) M8*15L(2PCS) M8(2PCS) #8*15L(2PCS)
30
7. Frame
8. Support post - left
9. Support post - right
10. Base frame
13. Console
14. Complete handlebar set
15. Locking knob for folding
16. Safety key
17. PCB cable middle
18. Hand pulse cable lower
19. PCB cable upper
20. Hand pulse cable lower
21. PCB cable middle
22. PCB cable lower
23. Base frame screws x 4
24. Handlebar screws x 4
25. Console screws x 4
27. Console bracket
28. Screws for console position
adjustment
29. Washers for console position
adjustment
30. Handrail decorating screw x 2
31. Compartment rack
32. Water bottle holder
After unpacking the fitness equipment, examine it carefully for possible damage. If there is any damage or there are missing parts,
please contact your retailer or an authorized repair facility for assistance.
1. Since your treadmill is a heavy piece of equipment, we recommend that after removing the box top, you slit the corners of the lower
carton and fold down the sides. This will eliminate the need to pick the treadmill over the sides of the box.
2. Prior to starting the assembly process take all the parts out of the box, remove all plastic bags, and lay them out on the floor to
become familiar with the components. Make sure that you remove all parts packaged underneath the treadmill. You may need to
slightly pick the back of the treadmill up to get better access to the parts on the bottom. You will notice that the treadmill is completely
assembled except for the handle bars and the display window. ( See FIG.1 of page 5)
4
ASSEMBLY INSTRUCTIONS
Parts
Hardware
Screws already in place on the treadmill:
Screws in the plastic bag: Tools:

FIG2FIG1
31
35
33
30
14
31
34
32
FIG6
14
32
31
30
30
FIG7
LS-3T:
1. Remove screws (#31) from the handrails (#14), secure the Left and
Right handrail covers (#34) (#35) on the sides of handrails (Fig 6).
2. Remove screws (#30) from the water bottle holder and place the
water bottle holder on the water bottle holder support piece (#32),
use screws (#30) to secure them tightly.
LS-5T/7T:
1. Place the water bottle holder (#32) onto the compartment rack (#31).
Gently press down until it snaps into place (Fig 7).
2. Remove two screws (#30) from the handrail set (#14), place the
compartment rack (#31) and the water bottle holder (#32) onto the
handrail set (#14). Make sure the holes are in position and tighten it
with screws (#30).
1. Carefully lift (as shown in Fig 2) the frame (#7) from the rear.
Remove console (#13), handlebars (#14) first then remove the
styrofoam (#3 & 4) from underneath.
2. Lower the frame carefully.
3. Remove screws (#23) from the left and right of the base frame (Fig 3).
4. Raise the left and right support bars (#8 & 9) to the upright position.
5. Refit the screws (#23) but do not tighten yet.
1. Reinstall the handlebar assembly (#14) onto the support bars (8 and 9).
Connect the PCB upper cables (#21) and the lower PCB
cables (#22) together and tuck cables into the tube.
2. Secure the handlebar set to the support bars with 4 screws
(#24) as shown (Fig 4).
3. Tighten the screws (#23) of the base frame (Fig 3).
1. Remove the screws (#25) from the back of the console (Fig 5).
2. Connect PCB cable lower (#17) and PCB cable upper (#19).
3. Connect hand pulse cable lower (#18) and hand pulse cable upper (#20).
4. Fit console to console bracket and tighten the screws (#25).
Note: You can adjust the position of the console by loosening and
tilting the console foward or back. When adjusted, tighten screw (#28).
5
FIG4
FIG3
FIG5
ASSEMBLY INSTRUCTION
Upright Assembly
Console Attachment
Handlebar Assembly

Suppression de la clé de
sécurité lorsqu'il n'est pas
utilisé et de stocker hors de
portée des enfants.
Remove the safety key when
not in use and store out of
reach of children.
Pour éviter tout risque de blessure,
debout sur le côté des rails avant
de tapis roulant. Lire le manuel du
propriétaire avant de. l'utiliser.
To avoid risk of injury, stand on the
side rails before starting treadmill.
Read owner’s manual before using.
1. Insérez la clé de sécurité
2. Sélectionnez le programme à l'aide des flèches et appuyez sur
la touche « mode ».
3. Choisissez le niveau et appuyez sur la touche «mode ».
4. Sélectionnez le temps à l’aide des flèches et appuyez sur la
touche « mode »
5. Appuyez sur Start pour commencer l'entraînement.
1. Insert safety key
2. Selet program using arrows, press mode.
3. Choose level using arrows, press mode.
4. Select time using arrows, press mode.
5. Press start to begin workout.
INSTRUCTIONS
PRUDENCE
CAUTION AVERTISSEMENT
WARNING
CONSOLE OPERATION
6
Button description Display
START / STOP :
This will “START” and “STOP” the treadmill.
There is also an Emergency “STOP” switch the (SAFETYKEY).
SPEED up
>
:
This will select program and level in set up mode before starting.
This will increase the speed in increments of 0.1 km/h or 0.1 mph.
SPEED down
>
:
This will select program and level in set up mode before starting.
This will decrease the speed in increments of 0.1 km/h or 0.1 mph.
MODE :
This will accept program and level selections.
This will switch display LAP or PULSE on data window during your exercise.
Display : The console is One (1) large LCD
with Five (5) separate windows for data .
Data :
Time : 88:88
Distance : 888.8
Cal : 8888
Lap / Pulse : 888
Speed : 88.8

7
Quick Start :
When the main power switch is in the “ON” position and the “Safety Key” is inserted into the console, the monitor
window will display a flashing “0:00” Press the “START” button to begin in the “Manual Mode”.
Program Operation :
After you have turned on the power, inserted “Safety Key” the monitor will display 0:00 on all the separate LCD windows.
1. Select Programs: Press “
>
” or “
>
” arrows to choose from the programs P1 ~ P5. Then press the “MODE” button.
2. Set the level: Press “
>
” or “
>
” arrows to choose from the workout level you desire. Then press the “MODE” button.
3. Set Time: Choose how long you want to workout for by pressing the “
>
” or “
>
” arrows. All programs will default to
thirty (30) minutes if no adjustment is made. Once completed, press the “START” button to begin your workout.
The Pause Function :
You can pause your treadmill at any time during your workout by pressing the “STOP” button once. To resume your
workout just press the “START” button.
The Reset Function :
You can reset your workout program and the time by holding the “STOP” button for a few seconds until the program
window displays “0:00”. Repeat the above steps to reset your desired program, level and workout time.
NOTE:
1. When the time reads 99:59 or 00:00, a series of beeps will sound, and last for five (5) seconds and then the
motor will stop.
2. When the “Safety Key” is pulled out in any situation the motor will stop immediately and the console is
reset.
3. The graphics of the workout profiles are printed on the console. Each overall workout time will be
segmented into ten (10) sections. Segment time = overall workout time / 10.
e.g. : If overall workout time is set at ten (10) minutes, each segment will last for one (1) minute.
CONSOLE OPERATION
Introduction :
To start treadmill, first ensure power cord is plugged in, the power switch is
turned to the “ON” position and the “Safety Key” is attached to your
clothing and to the console.
Do not stand on the running belt at this time. Stand on the side rails.
The treadmill has one (1) manual and five (5) preset programs (P1 – P5).
Each preset program has three (3) different levels for the user to choose
from. While running in the preset programs, the treadmill automatically
changes the speed. However you can still change the speed manually at
anytime you desire.

8
Button description Display
START / STOP :
This will “START” and “STOP” the treadmill.
There is also an Emergency “STOP” switch the (SAFETYKEY).
SPEED up
>
:
This will select program and level in set up mode before starting.
This will increase the speed in increments of 0.1 km/h or 0.1 mph.
SPEED down
>
:
This will select program and level in set up mode before starting.
This will decrease the speed in increments of 0.1 km/h or 0.1 mph.
INCLINE up
>
:
This will select program and level in set up mode before starting.
This will increase the elevation in increments of one (1).
INCLINE down
>
:
This will select program and level in set up mode before starting.
This will decrease the elevation in increments of one (1).
MODE :
This will accept program and level selections.
This will switch display LAP or PULSE on data window during your exercise.
CONSOLE OPERATION
Display : The console is One (1) large LCD
with Five (5) separate windows for data .
Data :
Time : 88:88
Distance : 888.8
Cal : 8888
Lap / Pulse : 888
Speed : 88.8
Suppression de la clé de
sécurité lorsqu'il n'est pas
utilisé et de stocker hors de
portée des enfants.
Remove the safety key when
not in use and store out of
reach of children.
Pour éviter tout risque de blessure,
debout sur le côté des rails avant
de tapis roulant. Lire le manuel du
propriétaire avant de. l'utiliser.
To avoid risk of injury, stand on the
side rails before starting treadmill.
Read owner’s manual before using.
1. Insérez la clé de sécurité
2. Sélectionnez le programme à l'aide des flèches et appuyez sur
la touche « mode ».
3. Choisissez le niveau et appuyez sur la touche «mode ».
4. Sélectionnez le temps à l’aide des flèches et appuyez sur la
touche « mode »
5. Appuyez sur Start pour commencer l'entraînement.
1. Insert safety key
2. Selet program using arrows, press mode.
3. Choose level using arrows, press mode.
4. Select time using arrows, press mode.
5. Press start to begin workout.
INSTRUCTIONS
PRUDENCE
CAUTION AVERTISSEMENT
WARNING

9
Introduction :
To start treadmill, first ensure power cord is plugged in, the power switch is turned
to the “ON” position and the “Safety Key” is attached to your clothing and to the
console. Do not stand on the running belt at this time. Stand on the side rails.
The treadmill has one (1) manual and five (5) preset programs (P1 – P5). Each
preset program has three (3) different levels for the user to choose from. While
running in the preset programs, the treadmill automatically changes the speed.
However you can still change the speed manually at anytime you desire.
CONSOLE OPERATION
Quick Start :
When the main power switch is in the “ON” position and the “Safety Key” is inserted into
the console, the monitor window will display a flashing “0:00” . Press the “START” button to begin in “Manual Mode”.
Program Operation :
After you have turned on the power and inserted the “Safety Key”, the monitor will display 0:00 on all the separate LCD windows.
P1 – P2 = Speed programs. P3 – P4 = incline programs. P5 = HRC program.
Select Speed or Incline program (P1 – P4) :
1. Select Program: Press “
>
” or “
>
” arrows to choose from the programs P1 – P5. Then press the “MODE” button.
2. Set Level: Press “
>
” or “
>
” arrows to choose the workout level you desire. Then press the “MODE” button.
3. Set Time: Choose how long you want to workout by pressing “
>
” or “
>
” arrows. All programs will default to thirty (30) minutes if no
adjustments are made. Once complete, press the “START” button to begin the workout.
Select HRC program :
1. Select program: Press Speed “
>
” or “
>
” arrows to choose program P5.
Then press the “MODE” button.
2. Select Age: Press Speed “
>
” or “
>
” arrows to enter the users age. Then press the “MODE” button.
3. Set Target Heart Rate: Press Speed “
>
” or “
>
” arrows to set the target Heart Rate. Then press the “MODE” button.
After a warm-up period, the program will automatically adjust the speed to maintain the target Heart Rate (Range 60 – 180 bpm).
4. Set Target Max. Speed: Press Speed “
>
” or “
>
”arrows to set the target max.speed. The speed will not increase over the max.
speed even though pulse has not reached the target Heart Rate yet.
5. Enter program time: Press Speed “
>
” or “
>
” arrows to enter the program workout time. Then press the “START” button.
The Pause Function :
You can pause your treadmill at any time during your workout by pressing the “STOP” button once. To resume your workout just press the
“START” button.
The Reset Function :
You can reset your workout program and the time by holding the “STOP” button for a few seconds until the program window displays
“0:00”. Repeat the above steps to reset your desired program, level and workout time.
NOTE:
1. When the time reads 99:59 or 00:00, a series of beeps will sound, and last for five (5) seconds and then the motor will stop.
2. When the “Safety Key” is pulled out in any situation the motor will stop immediately and the console will reset.
3. The graphics of the workout profiles are printed on the console. Each overall workout time will be segmented into ten (10)
sections. Segment time = overall workout time / 10.
e.g. : If overall workout time is set at ten (10) minutes, each segment will last for one (1) minute.

10
Each program is divided into ten (10) segments and has three (3) different levels. The preset workout time is
thirty (30) minutes.
km/h Speed program
MPH Speed program
PRESET PROGRAM

PRESET PROGRAM
11
Each program is divided into ten (10) segments and has three (3) different levels. The preset workout time is
thirty (30) minutes.
km/h Speed program Incline program
MPH Speed program Incline program

MAINTENANCE
12
Ensure the running belt is centered on your treadmill at all times.
Running style and a non-level surface are two instances that may
cause the belt to drift off center. Minor adjustments to the two
bolts at the rear of the treadmill are necessary when the belt has
drifted off center.
1. Press “START” to begin running belt, then increase the treadmills
speed to 5 km/h (3mph).
2. Stand at the rear of the treadmill to determine which direction the
belt is drifting.
3. If the belt drifts to the left, turn the left adjustment bolt with 6 mm
Allen wrench 1/4 of a turn clockwise. (FIG. C)
4. If the belt drifts to the right, turn the right adjustment bolt with 6 mm
Allen wrench 1/4 of a turn clockwise. (FIG. D)
5. Observe the tracking of the belt for about 30 seconds. Repeat
previous steps if needed.
Use only 100% Silicone and avoid using aerosol silicone sprays which include additives and petroleum distillates.
One ounce of Silicone should be used for each application. LifeSpan offers 100% silicone lubricant that can be ordered at
www.lifespanfitness.com.
The running belt should be lubricated every 3 months (regardless of use) or every 50 hours of use, whichever comes first.
Even if the treadmill is not being used, silicone will dissipate over time and the belt will dry out.
Note: Even though the running belt is lubed from the manufacturer, it is not a bad idea to lubricate the running belt when first
using the treadmill in case the belt has dried some between the dates the unit was manufactured and when it was purchased.
Apply the silicone to the underside of the treadmill belt. Do ot apply to the walking surface.This may be accomplished by
folding the treadmill and applying the silicone to the back of the belt from each back corner. Spray the silicone down and
across the belt from each corner. Rotate the belt 1/2 of the circumference and repeat from each corner.
Note: When lubricating the belt, make sure the treadmill is located on a surface that can be easily cleaned. After lubricating
your treadmill running belt, clean any excess silicone off the belt and frame.
To move belt to the Right
FIG C.
To move belt to the Left
FIG D.
It is recommended to wipe the treadmill down after each use to keep the treadmill clean and dry. A mild detergent may be used
at times to help remove all dirt and salt from the belt, painted parts and the display.
Cleaning would include removing the motor cover and cleaning around the motor and electronics. It is recommended to clean
the motor compartment if the treadmill is in an area where there might be a lot of pet hair or plush carpet fibers that could get
pulled up into the motor compartment. It is a good idea at this time to check and tighten all assembly hardware as well.
Aligning the running belt
Belt lubrication
Warning: Unplug the Power Cord Before Removing the Motor Cover.
Cleaning

13
To stabilize the treadmill on the floor, you can adjust the two screws located under the front
of the base frame.
1. Lift the machine on one side and then turn the screw under the front
of the base frame.
2. Turn the screws clockwise to make it screw up.
3. Turn the screw counterclockwise to make it screw down.
The electronics are continuously running self checks. If it finds an irregularity, the console will display an “Error” code and stop the
normal operation of the treadmill for safety purposes.
Folding/Unfolding
Treadmill Leveling
Trouble shooting with error codes
LS-7T:
Before folding, please put the incline value to zero (0) level.
1. Lower the deck with hand support.
1. Pull out the knob for locking.
On right side
of handlebar
1. Raise the frame.
Fold up:
1. Push the deck forward.
2. Pull out knob for releasing.
On right side
of handlebar
Release to unfold:
Speed sensor error :
1. Please check if there is anything stuck inside.
2. Please check if the speed sensor is loose or defective.
3. Please contact your after-service center.
Motor connection error :
1. Please check cable connection to motor are not loose or damaged.
2. Please contact your after-service center.
PCB panel control board and MCB motor control board connection error :
1. Please check all cables connected to the console PCB and motor controller MCB are not loose or damaged.
2. Please contact your after-service center.
Controller protection error :
Please contact your after-service center.
Motor protection error :
Please contact your after-service center
Motor controller (MCB) protection error :
Please contact your after-service center
Incline error (only MI150) :
Please contact your after-service center
HRC program error (only MI150) :
1. Please make sure that the hands are placed on the hand pulse grips or the chest strap is worn.
(Chest strap is an optional function.)
2. Please check if the wiring of the hand pulses are not loose or damaged.
3. Please contact your after-service center.
PLEASE REMOVE THE SAFETY KEYAND TURN OFF THE POWER SWITCH.
THEN TURN THE POWER SWITCH BACK ONTO SEE IF THE ERROR CODE HAS CLEARED
IF THERE IS STILLAN ERROR CODE PLEASE CONTACT YOURAFTER-SERVICE CENTER.
WARNING
MAINTENANCE

14
LIMITED WARRANTY
LS Series Folding Treadmills
Treadmill
Motor:
90 Days
90 Days
90 Days
90 Days
Contact 877-204-1009.
After the 90 Day Warranty period, please go to www.LifeSpanFitness.com and click online customer
support or call 801-973-9913 ext 4.

14
GARANTIE LIMITÉE
Garantie d’utilisation à domicile restreinte
Les tapis roulants pliants LS Series de LifeSpan sont couverts par une garantie restreinte suivante qui
s’applique uniquement à l’utilisation du tapis roulant à domicile ou à des fins résidentielles et non-
commerciales.
Cadre : 90 jours
Moteur : 90 jours
Pièces: 90 jours
Service : 90 jours
PCE Health and Fitness garantit que l’équipement fabriqué est exempt de tout défaut de matériel et de
construction, si utilisé conformément aux conditions standards d’utilisation et de service. Les périodes
susmentionnées se fondent sur la date d’achat. Au cours de ces périodes, PCE Health and Fitness
réparera et remplacera toute pièce défectueuse. Toutes les pièces étant normalement assemblées ou
remis par le client seront gratuitement réparées au cours de la première année. Les horaires de déplace-
ments du technicien de service pour des déplacements sur des distances supérieures à 20 miles pour-
ront être portés à la charge du client.
Si au cours des périodes susmentionnées, un fonctionnement inadéquat des pièces est observé, com-
posez le 877-204-1009. Après une période de garantie de 90 jours, consultez le site Internet
www.LifeSpanFitness.com et cliquez sur Service à la clientèle en ligne ou composez le
801-973-9913 Poste 4.
PCE Health and Fitness se réserve le droit de modifier ou d’améliorer nos produits sans être astreint à
modifier de façon similaire les produits déjà vendus. Afin d’assurer la garantie de notre produit et
d’assurer le fonctionnement sécuritaire et efficace de l’équipement LifeSpan, seules des pièces autori-
sées peuvent être utilisées. La garantie de ce produit est nulle si des pièces autres que celles fournies
par PCE Health and Fitness sont utilisées.
Exclusions et restrictions :
• Cette garantie ne s’applique pas aux défauts causés par négligence, par un mauvais usage, par un
assemblage ou un entretien inappropriés, accidentellement ou en raison d’une « calamité naturelle ».
• Cette garantie ne s’applique pas à la décoloration de la peinture ou des pièces en plastique.
• PCE Health and Fitness ne doit être tenu responsable des dommages indirects ou consécutifs.
• Cette garantie du propriétaire initial est non-transférable.
Enregistrement
Vous devez enregistrer votre produit LifeSpan avant qu’une réclamation ne puisse être traitée. Afin de
compléter l’enregistrement en ligne, visitez le site Internet www.LifeSpanfitness.com et cliquez sur
Enregistrer votre produit ou remplissez la bon de garantie fourni et acheminez-nous-le immédiatement.
Les fiches d’inscription doivent être remplies et postées à PCE Fitness dans les 30 jours suivant l’achat
afin de rendre la garantie du produit active. Les garanties de produit ne sont uniquement valides que
lorsque la fiche est correctement complétée et acheminée dans un délai de 30 jours.

13
Afin de maintenir le tapis roulant stable sur le sol, vous pouvez ajuster les deux vis situés sous
la partie frontale avant de la plate-forme.
1. Soulever l’appareil d’un côté et tourner la vis située sous la partie frontale de la plate-forme.
2. Tourner les vis dans le sens des aiguilles d’une montre afin de les visser.
3. Tourner les vis dans le sens contraire des aiguilles d’une montre pour les dévisser.
Les composantes électroniques requièrent continuellement des auto-vérifications. Si des irrégularités sont détectées, la console
affichera un code « d’erreur » et interrompra le fonctionnement normal du tapis roulant pour des raisons de sécurité.
Pliage/ Dépliage
Réglage du niveau du tapis roulant
Dépannage par le biais de code d’erreurs
LS-7T:
Avant de plier le tapis roulant, définir la valeur d’inclinaison à zéro (0).
1.Abaisser manuellement
la plate-forme
1.Appuyer sur le bouton
de verrouillage.
Sur le côté
gauche du guidon
1. Soulever la plate-forme.
Pliage:
1. Pousser la plate-forme en avant.
2.Appuyer sur le bouton
pour le relâcher.
.
Relâcher pour déplier:
Capteur de vitesse (erreur) :
1. Vérifier si quelque chose est resté coincé à l’intérieur.
2. Vérifier si le capteur de vitesse est lâche ou défectueux.
3. Veuillez contacter votre service de soutien technique à la clientèle.
Bornes du moteur (erreur) :
1. Veuillez vérifier tous les câbles raccordés au moteur afin de s’assurer qu’ils ne sont lâches ou endommagés.
2. Veuillez contacter votre service de soutien technique à la clientèle.
Panneau de commandes PCI et panneau de la commande moteur (erreur) :
1.Vérifier tous les câbles raccordés à la console PCI et là a commande moteur afin s’assurer qu’ils ne sont pas
lâches ou endommagés. 2. S'il vous plaît contactez votre centre de service après.
Protection du régulateur (erreur) :
Veuillez contacter votre service de soutien technique à la clientèle.
Protection du moteur (erreur) :
Veuillez contacter votre service de soutien technique à la clientèle
Protection de la commande moteur (erreur) :
Veuillez contacter votre service de soutien technique à la clientèle
Inclinaison (erreur) (MI150 uniquement) :
Veuillez contacter votre service de soutien technique à la clientèle.
Programme HRC (erreur) (MI150 uniquement) :
1.Assurez-vous que les mains sont placées sur les poignées du cardio-fréquencemètre ou si le sangle de
poitrine est endommagé. (Le sangle de poitrine est une fonction optionnelle).
2. Vérifier si les câbles des poignées du cardio-fréquencemètre ne sont pas lâches ou endommagées.
3.Veuillez contacter votre service de soutien technique à la clientèle.
AVERTISSEMENT
ENTRETIEN
RETIRER LA CLÉ DE SÉCURITÉ ET DÉBRANCHER L’INTERRUPTEUR D’ALIMENTATION. METTRE L’INTERRUPTEUR
D’ALIMENTATION À NOUVEAU EN MARCHE AFIN DE VERIFIER SI LE CODE D’ERREUR S’EST EFFACÉ. SI TOUTEFOIS UN
CODE D’ERREUR S’AFFICHE TOUJOURS, CONTACTEZ VOTRE SERVICE DE SOUTIEN TECHNIQUE À LA CLIENTÈLE.
Code
d'erreur Difficulté à tirer
élever
faible

ENTRETIEN
12
Assurez-vous que la bande d’entraînement est centrée en tout
temps sur votre tapis roulant. Le type de course et une surface
non nivelée sont deux facteurs pouvant faire basculer la bande au
centre. Des réglages mineurs des deux vis au dos du tapis roulant
sont nécessaires lorsque la bande a basculé au centre.
1. Appuyez sur “START (DÉMARRAGE)” afin de mettre en marche la
bande d’entraînement, augmentez ensuite la vitesse du tapis roulant
à 5 km/h (3 MPH).
2. Restez sur l’extrémité arrière du tapis roulant afin de voir dans
quelle direction la bande bascule.
3. Si la bande bascule à gauche, ajustez-la vers la gauche l’aide d’une
vis Allen de 6 mm à ¼ de tour dans le sens des aiguilles d’une
montre. (FIG. C)
4. Si la bande bascule vers la droite, ajustez-la vers la droite avec une
vis Allen de 6mm à ¼ de tour dans le sens des aiguilles d’une
montre. (FIG. D)
5. Observez le roulement de la bande pendant 30 secondes. Répétez
les étapes précédentes au besoin.
Utilisez uniquement du silicone 100% et évitez d’utiliser les vaporisateurs de silicone à base d’aérosol qui renferment des
substances additives et des distillats du pétrole. Une once de silicone devrait être utilisée lors de chaque usage. LifeSpan
offre un lubrifiant renfermant à 100 % du silicone qui peut être commandé à l’adresse suivante www.lifespanfitness.com.
La bande d’entraînement devrait être lubrifiée tous les 3 mois (quelque soit l’usage) ou toutes les 50 heures d’utilisation,
selon ce qui s’applique en premier lieu. Même si le tapis roulant n’est pas utilisé, le silicone se dissipera avant le temps et la
bande s’assèchera.
Remarque : Même si la bande est lubrifiée par le fabricant, il est toujours préférable de lubrifier la bande d’entraînement avant
de l’utiliser au cas où elle se serait asséchée entre la date de fabrication et la date d’achat.
Appliquez le silicone en dessous de la bande du tapis roulant. Ne l’appliquez pas sur la surface de marche. Ceci peut être
effectué en pliant le tapis roulant et en appliquant du silicone au dos de la bande de chaque côté du dos. Vaporisez le
silicone en-dessous et autour de chaque côté de la bande.
Remarque : Lors de la lubrification de la bande, assurez-vous que le tapis roulant est placé sur une surface facilement
nettoyable. Après avoir lubrifié la bande d’entraînement du tapis roulant, nettoyez le silicone excédentaire de la bande et du
cadre. Pivotez la bande d’1/2 de circonférence et répétez l’opération de chaque côté.
Pour déplacer la bande
vers la droite
FIG C.
Pour déplacer la bande
vers la gauche
FIG D.
II est recommandé de nettoyer le tapis roulant après chaque utilisation afin de le conserver propre et sec. Un détergeant doux
peut de temps à autre être utilisé afin de retirer toutes les saletés ou impuretés et le sel de la bande, des parties peintes et de
l’écran d’affichage.
L’opération de nettoyage comprend aussi le retrait du couvercle du moteur ainsi que le nettoyage autour du moteur et des
pièces électroniques. Il est recommandé de nettoyer le compartiment du moteur si le tapis roulant est dans endroit où il pourrait
y avoir des poils d’animaux ou des fibres de tapis à poils longs pouvant s’insérer dans le compartiment du moteur. C’est tout
aussi une bonne idée à ce moment de vérifier et de viser tous les pièces d’assemblage.
Réglage de la bande d’entraînement
Lubrification de la bande
Mise en garde : Débrancher le cordon d’alimentation avant de retirer le couvercle du moteur.
Entretien

PROGRAMME PRÉRÉGLÉS
11
Chaque programme est subdivisé en dix (10) segments et comporte trois (3) niveaux distincts.
Le temps d’entraînement prédéfini est de trente (30) minutes.
Programme de vitesse (km/h) Programme d’Inclinaison
Programme de vitesse (MPH) Programme d’inclinaison