Life Span GOLD User manual

1
GOLD
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
GOLD OWNER’S MANUAL

2
GOLD
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 10
6. TECHNICAL PARAMETERS 11
7. OPERATION GUIDE 12
8. EXERCISE GUIDE 21
9. MAINTENANCE GUIDE 23
10. EXPLODED DIAGRAM 28
11. PARTS LIST 29
12. TROUBLE SHOOTING GUIDE 31
13. WARRANTY 32

3
GOLD
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger – To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
•Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
•Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
•Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
•Place your unit on a solid, level surface when in use
•Never allow children on or near the treadmill.
•When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
•Keep hands away from all moving parts.
•Never operate the treadmill if it has a damaged cord or plug.
•Keep the cord away from heated surfaces.
•Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
•Never drop or insert any object into any openings.
•The treadmill is intended for in-home use only and not suitable for long time running.

4
GOLD
•To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
•The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
•Use the handrails provided; they are for your safety.
•Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
•Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
•NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
•NEVER remove any cover without first disconnecting AC power.
•NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
•This is high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.

5
GOLD
3. IMPORTANT OPERATING INSTRUCTIONS
•Be sure to read the entire manual before operating your machine.
•Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
•Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
•In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
•Always hold on to handrail while making control changes.
•A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
•Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.

6
GOLD
4. ASSEMBLY INSTRUCTIONS
PART LIST
#
Description Specification
QTY
1 Main frame 1
6
Computer assembly 1
3
Left upright 1
4
Right upright 1
74
Bolt
M10*15
14
91
Washer 10 14
54
Screw ST4.2*19 4
17 Allen Wrench
6mm
1
16 Allen Wrench S=13、14、15 1
55 Safety lock 1
22 Left base cover 1
23 Right base cover 1

7
GOLD
STEP 1:
STEP 2:
STEP 3:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (#1) onto level
ground
1. Insert left upright (#3) into the left side of
base frame set (#1)
2. Use the 6mm Allen wrench (#17),
M10*15 bolt (#74) and washer (#91) to
lock the left upright (#3) onto the base
frame.
1. Locate the computer bottom wire (#53)
inside the right upright (#4).
2. Insert the right upright into the right base
of main frame (#1).
3. Fix them onto the base with the 6mm
Allen wrench, bolt M10*15 (#74) and lock
washer (#91.)
Caution: Take care not to damage the computer
wire upon inserting upright tubes into the base
frame

8
GOLD
STEP 4:
STEP 5:
1. Connect the computer bottom wire (#53)
to computer up wire (#52)
2. Insert \ computer assembly (#6) into left &
right upright (#3) (#4).
3. Use 6mm Allen wrench, M10*15 bolt
(#74) and Washer (#91) to secure the
computer assembly (#6) onto left and
right upright tubes (#3) (#4).
Caution: Take care not to damage the computer
wire upon inserting computer into upright tubes
1. Use the 6mm Allen wrench, M10*15 bolt
(#74) and washer (#91) to secure the left
and right upright tubes to the base frame
(#2).
2. Use Allen wrench (#16) and screw (#54)
to lock the left and right base cover (#22)
(#23) onto base frame.

9
GOLD
STEP 6:
1. After tightening all screws, place the
safety key (#55) into position on the
computer
Please note: there is a plastic cover on top of the display and the buttons which may be
peeled off after assembly. See pictures below

10
GOLD
5. FOLDING INSTRUCTIONS
Folding:
Unfolding:
Erect the base frame using position (A)
until you hear the click sound emitted when
the air pressure bar (B) is locked into the
round tube.
1. Whilst supporting position (A) with your
hand, pull out the pin (B) with your right
hand.
2. Maintain this pin position whilst gently
pulling the base frame towards the
ground. Let the base frame descend
slowly to the ground.
3. The base frame will descend
automatically. (Please keep people and
any pets away the machine during
descent)