Life Span Workplace DT-3 User manual

FITNESS
QUICK START
DT3 TREADMILL
2. Attach the Console Cable
After connecting the console cable
to the treadmill place the console on
the desktop.
3. Attach the Power Cord
Connect the power cord to the base
of the treadmill then to a power
outlet.
4. Turn the Power Switch on
5. Conrm that the Safety Key is securely in place
6. Press and hold the Stop button for 1-3 seconds to
reset the console
7. Press Enter
Stand on the siderails of treadmill.
8. Press Start
The treadmill belt will start to move. You can begin walking.
9. Adjust speed with the up and down arrow buttons
10. Press Stop when you are nished
4
32
5
9
7
8
610
lifespanfitness.com
1. Position the treadmill
under your desk
Stand on the belt to see if you are
close enough to the desk to work
and walk. Adjust as needed.
Begin Here

FITNESS
PROBLEM:
The console is erratic or not
lighting up.
PROBLEM:
““UART” or “ “dc-6” appears in
the display.
PROBLEM:
The treadmill motor seems
strained or E1 comes up after
several minutes of use.
PROBLEM:
The treadmill speed feels too fast
or too slow.
SOLUTION:
Check to make sure the treadmill
is properly plugged in. Turn the
power switch o and make sure
the safety key is in place. Make
sure the console wire connector
is properly plugged in. Disconnect
the connections between the
treadmill and console. Then
plug them back together and
turn the power back on. If the
problem persists contact LifeSpan
Customer Service.
Customer Service: 877.654.3837 x 4
SOLUTION:
Turn the treadmill power
switch o. Unplug and re-plug
the console connector to the
treadmill. Turn the treadmill
power switch back on and check
to see if it functions properly.
Make sure the treadmill is
plugged into the wall socket and
not into an extension cord or
power strip.
SOLUTION:
This problem usually occurs when
there is too much friction building
between the treadmill belt and
deck. The best thing to do is turn
the treadmill o, lubricate the
running belt with 100% silicone
(non-aerosol), and turn the
treadmill back on. Test the unit.
If E1 still comes up after testing,
contact LifeSpan Customer Service.
SOLUTION:
Go into the Personal Settings
section and check if you are in
Metric or English mode. If you
are in the correct mode, contact
LifeSpan customer service.
dc6
Time
Step/Level
Calories
Distance
Speed
Weight
Time
Step/Level
Calories
Distance
Speed
Weight
E1 1. 3
Time
Step/Level
Calories
Distance
Speed
Weight
Time
Step/Level
Calories
Distance
Speed
Weight
Please see Owner’s Manual section Maintenance and Tips for more information.
TROUBLESHOOTING
lifespanfitness.com
DT3 TREADMILL