Lifepro Recovery + Fitness VIBRACARE User manual

VIBRACARE FOOT MASSAGER
READY,
SET, PRO
USER MANUAL

HELLO THERE.
Joel and I are athletes who suffered from
severe ACL injuries a few months apart.
We purchased multiple pieces of exercise
equipment for our in-home rehab but were
left disappointed and frustrated by fitness
gear that made big promises but gave no
support, no well-thought-out plan to follow,
and no results. And that’s how Lifepro came
about, and why the Recovery + Fitness active
recovery collection was created — we’ve
set out to change all of that. It’s why every
piece of equipment bearing our name not only
undergoes rigorous scrutiny to make sure it
delivers on power and efficacy, but also comes
with built-in support from our ‘guiding angels’
and a built-in lifetime warranty so that
you’re never left hanging.
Welcome to Lifepro.
We’re in this together now.
Clinicians use vibration
therapy and acupressure
to help improve blood flow
and relieve pain in the
extremities.
Everyone from professional
athletes, to people who
have intensely physical jobs,
to people who spend a large
amount of time on their feet
can experience the benefits
of foot massagers.

Vibration therapy and acupressure therapy have a wide variety of applications
and health benefits. Massage therapists use acupressure to relieve pain, improve
blood circulation, and reduce stress. Vibration therapy is used by professional
athletes, physical therapists, and rehabilitation centers to improve performance,
increase bone and muscle mass, boost metabolism, and reduce joint pain.
With the Lifepro VibraCare Foot Massager, you can experience myriad therapeutic
benefits from the comfort of your own home. The VibraCare’s large massage pads
provide a full foot and lower leg massage. The arch massager loosens up hard to
reach areas of the foot and enhances relaxation and pain relief. The VibraCare’s
ergonomic design efficiently reaches all of your acupuncture points. It’s perfect
for anyone who experiences stiffness, pain, or numbness in their feet or lower
legs from long hours of standing or walking.
The VibraCare offers a customizable foot massage. Ten preset programs, a
manual massage program, 30 intensity levels, and three massage positions allow
you to choose the perfect settings for all of your massage needs. The VibraCare
plugs directly into the wall outlet, so there’s no need to worry about keeping a
battery charged. It also comes with a fully functional remote control so you can
easily change the massage settings without getting up. The VibraCare’s small
size makes it portable enough to take with you everywhere. Enjoy relaxation and
pain relief anytime, anywhere!
Redefine your wellness and experience the
transformative power of the Lifepro VibraCare:
Alleviate chronic pain: reduces pain from arthritis and carpel tunnel
Improve joint flexibility: loosens tight muscles and tendons
Reduce numbness in feet and lower extremities: improves blood circulation
Decrease stress: increases serotonin and decreases cortisol
Reinvigorate tired feet: provides a relaxing massage
Check out the information in this manual for ways to get started using your
VibraCare. Next, be sure to visit our website vibracare.lifeprofitness.com for
access to our FREE library of workout videoswhich demonstrate how to easily
incorporate the VibraCare into your fitness routine.
Recovery + Fitness Collection 5

ACTIVATE THE REMOTE CONTROL
• Remove the back of the remote control.
• Install the 3V CR2025 battery using the polarity marks as a
guide.
• Securely replace the back of the remote control.
SET UP THE VIBRACARE
• Place the VibraCare on a flat, level, non-slip surface in front of a
chair with a back.
CONNECT THE VIBRACARE TO POWER
• Connect the AC power adapter connector to the power jack on
the back of the VibraCare.
• Plug the power adapter into a wall outlet.
BEGIN USING THE VIBRACARE
• Sit down in the chair and place your clean feet on the foot pads.
• Press the Power button on the remote control to turn on the
VibraCare.
6VibraCare User Manual Lifepro
GET STARTED
WHAT’S IN THE BOX
• Lifepro VibraCare Foot Massager
• AC Power Adapter
• Remote Control
• 3V 2025 Battery
• User Manual
FIRST STEPS
1. Remove your VibraCare from the shipping box and remove all packaging
from the unit and accessories.
2. Inspect the device and accessories for shipping damage.
3. Read carefully through this user manual and all safety instructions
before using the VibraCare.
4. Go to vibracare.lifeprofitness.com and register your product within
14 days of purchase to activate your lifetime warranty.
5. Complete the steps in the EASY-START SETUP GUIDE on page 7
to begin using your VibraCare.
CUSTOMER SUPPORT
If you have any questions about setting up your VibraCare, we’re
here to help. Call or email us and an experienced customer support
representative will be happy to assist you: support@lifeprofitness.com
or [phone].
VIBRACARE
FOOT MASSAGER
RECOVERY + FITNESS
Recovery + Fitness Collection 7
EASY-START SETUP GUIDE
Set up your Lifepro VibraCare in just four easy steps:
3
4
1
2
WARNING: The VibraCare is to be used on the feet and calves only. Do
not use it on the abdomen, neck, or other body parts not described in this
manual.
WARNING: Do not sit or stand on the VibraCare. Do not exert excessive
downward force on the foot pads.

8VibraCare User Manual Lifepro
PARTS OF THE VIBRACARE TIPS FOR USING YOUR VIBRACARE
USING THE VIBRACARE
• Place the VibraCare on a flat, level surface during use.
• The back of the remote control is magnetized and can be placed on the
magnet symbol on the control panel for safekeeping.
• Start at the lowest speed and increase level slowly.
• If you have sensitive feet, use the lowest intensity level to avoid
discomfort.
• You may wish to wear socks during use to further prevent discomfort.
• Do not use on wet, dirty, or sweaty feet.
• Stop use if you feel tired or dizzy, or if you experience pain.
• Foot massage can have a stimulating effect and prevent sleep, so it’s
best not to use the VibraCare just before bedtime.
• Drink plenty of water before and after use.
• Daily use will help you reach your wellness and pain-reduction goals.
• The default massage time is 15 minutes. Do not use continuously for more
than 20 minutes.
IMPORTANT SAFETY INFORMATION
• Never use the VibraCare under a blanket or pillow. Excessive heat can
potentially cause fire, electrocution, or injury to people or property.
• Keep the unit, power cord, and remote away from heat sources and fire.
• The VibraCare is not waterproof. Keep away from liquids, and do not
immerse in water.
• Never use the VibraCare or plug/unplug the power cord with wet hands.
• Always power off and unplug the unit after each use.
• Do not sit or stand on the VibraCare. Do not exert excessive downward
force on the foot pads.
• Use the remote control to adjust or stop the massage once the massage
program has begun. Using the control panel while the unit is moving
could result in an accident or injury.
Recovery + Fitness Collection 9
Arch Massager
Power Jack
Control Panel
Foot Pad
(Left and Right)
Readout
Screen
Position Adjustment
Legs (6)
AC Power
Adapter
Power Jack
Connector
Wall Plug
Remote

10 VibraCare User Manual Lifepro Recovery + Fitness Collection 11
1. Program Readout: Shows the
current selected preset massage
program (P0–P9) or manual
program (HR).
2. Time Readout: Shows the
remaining massage time in one-
minute increments.
3. Speed Readout: Shows the
current massage speed. Speed
ranges from 1–30.
4. Power Button: Power the
VibraCare on and off.
5. Readout Select Buttons: Toggle
up or down through the Program,
Time, and Speed options on the
readout screen.
6. Decrease Button: Decrease the
massage program duration or
speed. Change the preferred
massage program.
7. Increase Button: Increase the
massage program duration or
speed. Change the preferred
massage program.
NOTE: For best results, point the remote control directly at the receiver from no more
than 6 feet away.
USING THE REMOTE TO OPERATE THE VIBRACARE
OPERATING INSTRUCTIONS
USING THE CONTROL PANEL TO OPERATE THE VIBRACARE
1. Time +/- Buttons: Increase or decrease the program duration, from
1–15 minutes in one-minute increments.
2. Power Button: Power the VibraCare on and off.
3. Program Button: Toggle through the ten preset massage programs,
P0–P9, or select the manual program (HR).
4. Speed +/- Buttons: Increase or decrease the massage speed from level
1–30. Speed automatically starts at level 1.
5. Magnet: Place the remote control on the magnet to avoid losing it.
6. Speed Window: Shows the current massage speed. Speed ranges from
level 1–30.
7. Remote Control Sensor: Infrared receiver for the remote control. For
best results, point the remote control directly at the receiver from no
more than 6 feet away.
8. Program/Time Window: During standby mode, the window shows the
selected preset program (P0–P9) or manual mode (HR). During the
massage, the window shows the remaining massage time in one-minute
increments.
1 2
8
3
7
4
6
5
1
2
3
4
5
6
5
7

CHOOSING A MASSAGE POSITION
MASSAGING YOUR FEET AND ARCHES
To use the VibraCare to massage your feet and arches:
1. Sit on a sofa or sturdy chair with a back.
2. Place the VibraCare in front of you.
3. Ensure that the VibraCare is positioned so that the foot pads are facing
your legs and the control panel points up.
4. Place your feet on the foot pads in one of the two positions shown
below:
5. You may wish to alternate between these two positions or move your
feet slowly and rhythmically up to the arch massage position until your
feet completely relax.
12 VibraCare User Manual Lifepro Recovery + Fitness Collection 13
CHANGING THE ANGLE OF THE VIBRACARE
The VibraCare has six position adjustment legs which allow you to tilt the
massager forward and backward to reach different areas of your feet and
calves. To adjust the angle of the VibraCare:
1. Sit on a sofa or sturdy chair with a back.
2. Place the VibraCare in front of you.
3. Ensure that the VibraCare is
positioned so that the foot pads are
facing your legs and the control panel
points up.
4. Place your feet on the footpads.
5. Push the massager forward with
your feet until it is at an angle that
allows the vibrations of the massager
to reach the sore areas of your feet
or legs. You may need to move the
massager closer to your chair.
MASSAGING YOUR CALVES
To use the VibraCare to massage your
calf muscles:
1. Sit on a sofa or sturdy chair with a
back, with the VibraCare in front of
you.
2. Tip the VibraCare up on the four
position adjustment legs at the top of
the device, so that the control panel
points down towards the floor.
3. Place your calves on the foot pads as
shown.
FOOT MASSAGE ARCH MASSAGE

CHOOSING A MASSAGE PROGRAM
You can select from ten programs, P0–P9, or select the manual program
(HR). Each of the ten preset massage program is 15 minutes long and uses
varying massage speeds, from level 1–30, to soothe your feet or calves.
The programs are:
• Manual (HR): Create your own massage program from 1–15 minutes.
You may adjust the massage speed from levels 1–30 at any time during
the massage.
• P0: Low speed program with a burst of medium speed at the end.
• P1: Starts at low speed, gradually increasing to medium speed over the
course of 8 minutes, then repeats that sequence.
• P2: Alternates between low (8) and medium (14) speeds every minute.
• P3: Alternates between low (6) and medium (18) speeds every minute.
• P4: Alternates between low (1) and high (20) speed every minute.
• P5: Alternates between low (3), medium (9), and high (27) speed every
minute.
• P6: Alternates between medium (15) and high (26) speed every minute.
• P7: Alternates between 3 high speeds (20, 25, 30) every minute.
• P8: Alternates between 3 high speeds (20, 23, 26) every minute.
• P9: Alternates between low (1), medium (10), and high (30) speed
every minute.
CHOOSE A PRESET MASSAGE PROGRAM
USING THE CONTROL PANEL
To begin a preset program using the control panel:
1. Press the Power button on the remote control to turn on the display
panel. Manual mode is automatically selected (you will see HR in the
program/time window).
2. Press the Program button to toggle through preset programs, P0–P9,
14 VibraCare User Manual Lifepro Recovery + Fitness Collection 15
to select one. Your selected program begins immediately and can be
changed at any time.
3. Press the Power button to turn the system ON.
4. Each preset program is 15 minutes long; however, you may adjust
the time, if desired. Use the Time +/- buttons to adjust the massage
duration from 1–15 minutes, in one-minute increments. Your adjusted
time will show in the program/time window.
5. The VibraCare will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
6. Always unplug the VibraCare after each use.
USING THE REMOTE CONTROL
To begin a preset program using the remote control:
1. Press the Power button to turn the system ON.
2. The Readout Select buttons are used to move through the program,
time, and speed options on the readout screen. Your selection flashes in
the screen when chosen.
3. Use the Readout Select buttons to select Program. The default is the
manual program (HR). Use the Increase/Decrease buttons to select a
preset program, from P0–P9. Your selected program begins immediately
and can be changed at any time.
4. Each preset program is 15 minutes long; however, you may adjust the
time, if desired. Use the Readout Select buttons to select Time. Use
the Increase/Decrease buttons to change the massage duration, from
1–15 minutes, in one-minute increments. Your adjusted time will show
in the program/time window.
5. Press the Power button to stop the massage at any time.
6. The VibraCare will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
7. Always unplug the VibraCare after each use.
NOTE: Speed cannot be adjusted for preset programs. If you adjust the
speed during a preset program, the system will switch automatically to the
manual mode program (HR).

CREATE A MANUAL MASSAGE PROGRAM
USING THE CONTROL PANEL
To create a manual massage program using the control panel:
1. Press the Power button to turn the system ON.
2. The manual program (HR) is selected by default and is shown in
the program/time window. The selected manual program begins
immediately and can be changed at any time.
3. Use the Time +/- buttons to adjust the massage duration from 1–15
minutes, in one-minute increments. The default massage time is 15
minutes. Your selection is shown in the program/time window and can
be adjusted at any time.
4. Use the Speed +/- buttons to adjust the massage speed from levels
1–30. Your selection is shown in the speed window and can be adjusted
at any time during the massage.
5. Press the Power button to stop the massage at any time.
6. The VibraCare will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
7. Always unplug the VibraCare after each use.
USING THE REMOTE CONTROL
To create a manual massage program using the remote control:
1. Press the Power button on the remote control to turn the system ON.
2. The manual program (HR) is selected by default and is shown in the
program readout on the remote control. The selected manual program
begins immediately and can be changed at any time.
3. The Readout Select buttons are used to move through the program,
time, and speed options on the readout screen. Your selection flashes on
the screen when chosen.
4. Use the Readout Select buttons to select Time. Use the Increase/
Decrease buttons to set a massage duration, from 1–15 minutes, in
one-minute increments. Your selection is shown in the time readout and
can be adjusted at any time.
5. Use the Readout Select buttons to select Speed. Use the Increase/
Decrease buttons to adjust the massage speed, from level 1–30. Your
selection is shown in the speed readout and can be adjusted at any
time.
6. Press the Power button to stop the massage at any time.
7. The VibraCare will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
8. Always unplug the VibraCare after each use.
NOTE: You may adjust speed or time at any time during a manual massage
program. You may also change your program at any time.
MASSAGE INTENSITY AND SPEED
Massage intensity corresponds to the following speeds:
16 VibraCare User Manual Lifepro Recovery + Fitness Collection 17
INTENSITY SPEED
Low 1–9
Medium 10–19
High 20–30

SAFETY INSTRUCTIONS
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR REFERENCE.
WARNING: To reduce the risk of burns, fire, electric shock, injury to persons, or
damage to equipment, read the following important precautions and information
before operating the VibraCare.
DISCLAIMER
1. The health benefits suggested or implied in this manual, other product literature, and
website are not certified or endorsed by any regulatory authority or medical institute.
2. The use of the foot massager is entirely at the user’s discretion. Please read all
instructions and safety information carefully before using this product. We assume no
responsibility for personal injury or property damage sustained by or through using this
product.
RESPONSIBILITIES
3. It is the responsibility of the owner to ensure that all users of the VibraCare are
adequately informed of all warnings and precautions.
4. Use the VibraCare only as instructed in this manual.
5. ONLY use the VibraCare on the feet and calves. Do not use on hands, knees, elbows, or
other body parts not described in this manual.
6. Always inspect the device for damage before each use. Do not use if damaged,
malfunctioning, or if the unit or cord has been exposed to water.
7. Only operate the VibraCare on a flat, level, non-slip surface.
8. Do not operate the VibraCare while driving.
9. The unit will automatically power off after 15 minutes of use. Do not use continuously
for more than 20 minutes.
10. The VibraCare is intended for in-home use only. Do not use the VibraCare in any
commercial, rental, institutional, or therapeutic setting.
11. Dispose of the VibraCare, batteries, packaging and all parts according to local and
federal regulations.
ELECTRICAL/BATTERY SAFETY
12. WARNING: Use only the included power adapter.
13. Unplug the unit after use and prior to cleaning or storing.
14. Do not use outdoors. Do not use the unit in high-temperature or high-moisture
environments.
15. Do not charge the batteries. They must be replaced with the same type.
16. Do not ingest the battery. If the battery has been ingested, seek medical help
immediately, as that can cause internal burns or even death.
17. The VibraCare and its remote control are not waterproof. Keep it away from liquids. Do
not use it in a place where the unit may become wet or damp. Do not immerse it in water.
If the unit accidentally becomes wet, unplug it, and do not use.
18. Do not use, plug in, or unplug the unit with wet hands.
19. Keep the VibraCare away from flammable or explosive items, chemicals, open flame,
and heat sources such as central heating, portable heaters, stoves, fireplaces, and
ovens.
20. Keep sharp objects away from the VibraCare.
21. Keep ventilation ports free from dust and debris.
22. Do not operate it under a blanket or pillow. Excessive heat can potentially cause fire,
electrocution, or injury to person(s) or property.
23. Do not operate it in the presence of aerosol (spray) products or corrosive gases, or
where concentrated oxygen is being administered.
24. Never drag or hang the VibraCare by its power cable.
SAFETY
25. Never leave the VibraCare unattended while it is running.
26. Consult with a medical professional before using the device if you have a medical
condition such as diabetes, inflammation, if you suffer from blood clots, if you have
a pacemaker or other similar implant, recently had surgery, are suffering from heart
disease, circulatory problems, or osteoporosis, and/or are pregnant.
27. Do not use the VibraCare if you are injured. Never use directly on swollen or inflamed
skin or open wounds.
28. Stop using the device immediately if you feel discomfort, pain, dizziness, or nausea.
29. Always use the VibraCare while seated comfortably in a chair.
30. Do not stand on the VibraCare or exert excessive downward force on the foot pads.
31. Do not insert body parts or objects into any opening on the VibraCare.
32. Children and adults with diminished mental or physical capacity may only use the
VibraCare while closely supervised by a responsible adult.
33. Keep pets away from the VibraCare at all times.
CLEANING, STORAGE & MAINTENANCE
34. Turn off, unplug, and allow the VibraCare to cool down before cleaning or storing.
35. Wipe down the VibraCare with a soft, slightly damp cloth after each use. Never allow
water or other liquids to come into contact with the unit.
36. Do not use abrasive, solvent, or chemical cleaners or harsh detergents. You may use a
mild soap.
37. Remove the batteries if the remote will not be used for a long time, and store in a cool,
dry place.
38. Do not store other objects on top of the unit.
39. Do not remove screws or attempt to disassemble.
18 VibraCare User Manual Lifepro Recovery + Fitness Collection 19

LIFETIME
WARRANTY
Lifepro Fitness creates quality,
durable exercise products and
we stand by that quality with a
lifetime warranty on all of our
products. If your VibraCare ever
breaks (and we doubt it will),
we’ll send you replacement parts
and show you how to repair it.
If your VibraCare cannot be
repaired, we’ll replace it—free of
charge. Register your VibraCare
at vibracare.lifeprofitness.com
to activate your warranty within
14 days of purchase.
Recovery + Fitness Collection 21Recovery + Fitness Collection 21
20 VibraCare User Manual Lifepro
TROUBLESHOOTING GUIDE
Quickly troubleshoot simple issues you might experience with your VibraCare Foot
Massager using the table below.
Please contact a customer support representative for additional assistance at:
support@lifeprofitness.com or [phone]. Please do not attempt to repair the
VibraCare.
ISSUE POSSIBLE REASON HOW TO RESOLVE
MASSAGER IS NOT
WORKING
Massager is not
plugged in.
Plug the power cord into the
power jack and a wall outlet.
Massager is not turned
on.
Press the Power button to turn
on the foot massager.
REMOTE
CONTROL IS NOT
WORKING
Battery is installed
incorrectly.
Remove battery and install
correctly.
Remote control is too
far away from the
infrared receiver.
Point the remote at the infrared
receiver on the control panel,
from no more than 6 feet away.
Battery is dead. Install a new 3V CR2025 battery.
MASSAGER STOPPED
WORKING SUDDENLY
Massager automatically
shuts off after the set
working time.
Turn the massager back on to
begin a new massage program.
When the massager has
been working for a long
time, the motor shuts
off due to overheating
protection.
Allow the massager to cool down
before using again.
MASSAGE INTENSITY
IS TOO HIGH
Speed level is set too
high. Use a lower speed level (1-30).
Feet may be sensitive. Put on a pair of thick socks.
FAINT SOUND
HEARD WHILE
USING MASSAGER
Massager is using
vibration.
This is a normal sound made by
the motor.

UNIT SPECS
Size: 15.0” L x 12.0” W x 8.5” H
Net Weight: 11 lbs
Power: 48 W
Frequency: 50–60 Hz
Voltage: DC 24 V
Decibel Rating: 35-45 dB
Ambient Temperature: 32–104° F
Speed Intensity Levels: 1–30
Massage Programs: P0–P9
AC POWER ADAPTER
Rated Input: AC 100–240 V ~50/60 Hz
Rated Output: 24 V 2 A
BATTERIES REQUIRED
3V CR2025 included)
AGILITY
VIBRATING MASSAGE BALL
The Agility Vibrating Massage
Ball is designed to target
small muscle groups. The
Agility Ball is small enough to
fit in the palm of your hand
and gives you a wide range of
massage motions: circular, up-
and-down, and side-to-side.
The Agility Ball’s silicone
exterior is durable and easy-
to-grip, but soft enough to
use on sensitive areas like
your neck, hands, and feet.
AGILITY BALL BENEFITS
• Increase circulation
• Improve muscle flexibility
and performance
• Relax tight muscles
and fascia
• Reduce muscle
pain and
inflammation
• Boost blood
flow
FROM OUR SOAR FX™COLLECTION
22 VibraCare User Manual Lifepro
PRODUCT
SPECIFICATIONS
MADE IN CHINA
VIBRACARE
FOOT MASSAGER
RECOVERY + FITNESS

Access Lifepro TV, our library of free
personal training videos on the web at
vibracare.lifeprofitness.com to learn how to
get the most out of your Lifepro®VibraCare
and achieve the results you want.
Lifeprousa Lifeprousa support@lifeprofitness.com
YOU’VE
GOT
THIS