Lightmybricks LEGO LAMBORGHINI SIAN FKP 37 42115 User manual

INSTALLATION GUIDE 1LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®Star Wars
The Razor Crest 75292
Light Kit Installation Guide

INSTALLATION GUIDE 2LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®Lamborghini Sián FKP 37
(42115) Lighting Kit.
This PDF details the instructions for the
LED light kit only. If you are wishing to
purchase this LED Lighting Kit , please
click here to view the product page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
8 × Cool White 30cm Bit Lights
12 x Warm White 15cm Large Bit Lights
6 x Light Bar White 4.2cm (64 LEDs)
1 x 12-Port Expansion Board
3 x 8-Port Expansion Boards
1 x 5cm Conecting Cable
1 x 15cm Conecting Cable
1 x 50cm Connceting Cable
1 x USB Power Cable
LEGO PIECES:
8 × Trans Clear Round Plate 1x1
6 × Light Bluish Grey Technic Pin 1/2

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
7. Instructions
25. Final Product
26. Troubleshooting
31. Contact
CONTENTS

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
12
STEPS
Light Bar 4.2 cm White
x3
3

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
4
STEPS

LAMBORGHINI SIÁN FKP 37 42115 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 10
5
STEPS
12-Port Expansion Board
6
USB Power Cable
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
Connect to a USB
Power Bank or Wall
Adaptor
(each sold separately)