Lightmybricks 10278 User manual

INSTALLATION GUIDE 1LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®Police Station 10278
Light Kit Installation Guide

INSTALLATION GUIDE 2LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®Police Station (10278)
Lighting Kit.
This PDF details the instructions for the
LED light kit only. If you are wishing to
purchase this LED Lighting Kit , please
click here to view the product page.
Before you begin, please check that
you have all the correct quantities
of components as per the package
contents listing.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
5 x White 30cm Bit Lights
6 x White 15cm Bit Lights
4 x Green 30cm Bit Lights
1 x Pink 30cm Bit Lights
1 x Flashing Red 30cm Bit Lights
1 x White Lamp Post w Bit Light Installed
7 x White Strip Lights
1 x 6-Port Expansion Board
1 x 8-Port Expansion Board
1 x 12-Port Expansion Board
4 x 15cm Connecting Cables
2 x 30cm Connecting Cables
3 × Wireless Power Connectors
6 x Adhesive Squares
1 × USB Power Cable
(Power Source not included, sold separately)
LEGO PIECES:
7 × Plate 1x6 (Any Colour)
2 × Black Round Plate 1x1 w open stud
1 × Light Bluish Grey Round Plate 1x1 w open stud
1 × Dark Bluish Grey Tile 1x1
2 × Dark Bluish Grey Tile 1x2

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
44. Final Product
45. Troubleshooting
50. Contact
CONTENTS

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
1
STEPS
White Lamp Post
w/ Bit Light Installed
2

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
3
Dark Bluish Grey Tile 1x2
White 15cm Bit Light

LEGO POLICE STATION 10278 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
12-Port Expansion Board
54
Connect the White
15cm Bit Light and
the Lamp Post Cable
to the expansion
board
USB Power Cable