Lightmybricks LEGO 75309 User manual

LEGO® UCS REPUBLIC GUNSHIP
#75309 LIGHT KIT
INSTALLATION GUIDE

LEGO UCS REPUBLIC GUNSHIP 75309 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® UCS REPUBLIC GUNSHIP #75309
LIGHT KIT INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
UCS Republic Gunship (75309) Light Kit.
This PDF details the instructions for the LED light & sound
kit only. If you are wishing to purchase this product, please
click here to view the product.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO UCS REPUBLIC GUNSHIP 75309 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
5 x Green 30cm Large Bit Light*
9 x Cool White 30cm Bit Light*
7 x Cool White 15cm Bit Light
3 x Red Strip Light
1 x Purple/Dark Pink Lightsaber
3 x 2-Port Expansion Board*
3 x 8-Port Expansion Board*
1 x 12-Port Expansion Board
• 4 x Black Plate 1x2
• 1 x Black Plate 2x8
• 6 x Trans Light Blue Round Plate 1x1
• 6 x Trans Clear Plate 1x1
• * Indicates 1 extra component has been included just in case!
1 x Gun Eects Board
2 x 5cm Connecting Cables
5 x 15cm Connecting Cables*
2 x 30cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)

LEGO UCS REPUBLIC GUNSHIP 75309 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 42
Troubleshooting 43
Contact 48

LEGO UCS REPUBLIC GUNSHIP 75309 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.