Lightmybricks LEGO BOUTIQUE HOTEL User manual

LEGO® BOUTIQUE HOTEL
#10297 LIGHT KIT
INSTALLATION GUIDE

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® BOUTIQUE HOTEL #10297 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Boutique Hotel (10297) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
9x Warm White Strip Light
6x White 30cm Bit Light
10x White 15cm Bit Light*
1x Flashing White 30cm Bit Light
1x Lamp Post White
1 x 2-Port Expansion Board
4 x 6-port expansion Board
1 x 8-port expansion Board*
10 x Adhesive Squares
• 8 x Plate 1x6 (any colour)
• 5 x Round Plate 1x1 Open Stud – Black
• 8 x Plate 1x1 Mod Rounded w Handle – Black
• 4 x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
• 2 x Round Plate 1x1 Open Stud – White
• 4 x Round Plate 1x1 - Trans Clear
• 4 x Plate 1x1 - Trans Clear
3 x 30cm Connecting Cable*
5 x 15cm Connecting Cable
2 x 5cm Connecting Cable
4 x Wireless Power Connectors
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been
included just in case!

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 4
Blueprint 8
Instructions 9
Final Product 52
Troubleshooting 53
Contact 58

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
BLUEPRINT

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
1 2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White Lamp Post

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
4
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Pull the Black
pole down slightly so
there is a gap in the
Trans Yellow LEGO
piece
6-Port Expansion Board
White 15cm Bit Light

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
7
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2 x 30cm Connecting Cable

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Grab one
(of two) 30cm
Connecting Cable
and thread it as
shown
9
Grab the second
30cm Connecting
Cable and thread it
as shown
2-Port Expansion Board
USB Power Cable

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
11
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect to a
USB Power Bank, AA
Battery Pack, or USB
Wall Adapter (each
sold seperately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Wireless Power Connector
(Tile Side)
2x Adhesive Squares
Connect the
Wireless Power
Connector on the
single stud as shown
and ensure the
cable side is facing
towards the inside of
the building

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White Strip Light Wireless Power Connector
(Tile Side)
Ensure the
Wireless Power
Connector cable is
facing towards the
inside of the building

LEGO BOUTIQUE HOTEL 10297 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
14 15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Ensure the
Wireless Power
Connector cable is
facing towards the
inside of the building
Wireless Power Connector
(Plate Side)
Plate 1x6
White Strip Light