Lightmybricks LEGO CAMP NOU FC BARCELONA 10284 User manual

LEGO® CAMP NOU
FC BARCELONA
#10284 LIGHT KIT
INSTALLATION GUIDE

LEGO CAMP NOU - FC BARCELONA 10284 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® CAMP NOU - FC BARCELONA #10284
LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Camp Nou - FC Barcelona (10284) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO CAMP NOU - FC BARCELONA 10284 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
23x Cool White 30cm Large Bit Light*
13x Cool White 30cm Bit Light*
12x White Strip Light
3 x 2-Port Expansion Board
3 x 6-Port Expansion Board
2 x 8-Port Expansion Board
3 x 12-Port Expansion Board*
• 31 x Round Plate 1x1 Open Stud – Black*
• 10 x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
• 21 x Plate 1x1 Mod Rounded w Handle – Black*
8 x 5cm Connecting Cable
9 x 15cm Connecting Cable*
6 x 30cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been included just in case!

LEGO CAMP NOU - FC BARCELONA 10284 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 51
Troubleshooting 52
Contact 57

LEGO CAMP NOU - FC BARCELONA 10284 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.