Lightmybricks LEGO WINNIE THE POOH 21326 User manual

LEGO® WINNIE THE POOH
#21326 LIGHT KIT
INSTALLATION GUIDE

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® WINNIE THE POOH #21326 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Winnie The Pooh (21326) Light Kit.
This PDF details the instructions for the LED light & sound
kit only. If you are wishing to purchase this product, please
click here to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS:
3 x Orange 30cm Bit Lights
3 x White 30cm Bit Lights
2 x Warm White 30cm Large Bit Lights
1 x 8-Port Expansion Board
1 x Flicker Eects Board
1 x 5cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)
4 x Adhesive Squares

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 28
Troubleshooting 29
Contact 34

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1 2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Orange 30cm Bit Light
1cm
Leave approx
1cm of cable from
the LED
Bend the LED so
that it faces upward

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
4
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Flicker Eects Board
5cm Connecting Cable
8-Port Expansion Board
Connect the Bit
Light to one of the
OUT ports on the
Flicker Eects Board
Connect the 5cm
Connecting Cable
to the IN port on the
Flicker Eects Board

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the
other end to a USB
Power Bank, USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
USB Power Cable

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
67
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Orange 30cm Bit Light
The LED of the
Bit Light should be
visible between the
gaps

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Lift up the set
and bring the Bit
Light cable
underneath toward
the right side
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Connect the Bit
Light to one of the
OUT ports on the
Flicker Eects Board

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
9 10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
11 12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the
White 30cm Bit Light
to the remaining
OUT port on the
Flicker Eects Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Orange 30cm Bit Light
The LED of the
Bit Light should be
visible between the
gaps

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
14
15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
2x Adhesive Squares

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
16
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Warm White 30cm Large Bit Light
x2

LEGO WINNIE THE POOH 21326 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
18
19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Use the LEGO
Removal Tool to
push the cable into
the corners
Use the LEGO
Removal Tool to
push the cable into
the corners