Lightmybricks LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT User manual

LEGO® SCOUT TROOPER HELMET
#75305
LIGHT KIT
INSTALLATION GUIDE

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
2
Light My Bricks
LEGO® SCOUT TROOPER HELMET
#75305 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
SCOUT TROOPER HELMET (75305) Light Kit.
This PDF details the instructions for the LED light & sound
kit only.
If you run into any issues, please refer to the
troubleshoot-ing section towards the end of this guide.
Have fun and enjoy!
INSTALLATION GUIDE

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
4 x Cool White 30cm Bit Lights
2 x Cool White 30cm Large Bit Lights
1 x 8 Port Expansion Board
•2 x Black Round Plate 1x1 w Open Stud
•2 x Black Arm Skeleton, Bent w Clips (Horizontal Grip)
•4 x Black 1x1 Modified Plate Rounded with Handle
•2 x Black 1x6 Plate
1 x USB Power Cable
(Power Source not Included)

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 15
Troubleshooting 16
Contact 21

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.
LEGEND:DISCONNECT DIRECTIONAL
LEGENDE:TRENNEN DIRECTIONAL
LÉGENDE:DÉCONNECTER DIRECTIONNEL
LEGGENDA: SCOLLEGARE
CONNECT / RECONNECT
VERNINDEN / WIEDERVERBINDEN
CONNECTER / RECONNECTER
CONNETTI / RICONNETTI
TURN / FLIP
WENDEN / KIPPEN
TOUR / INCLINAISON
ROTARE / INCLINARE DIREZIONALE
TWIST / BRAID
DREHEN / VERDREHEN
TORSION / TRESSER
TWIST / TRECCIA
POWER ON / TEST
EINSCHALTEN / TESTEN
POWER ON / TEST
POWER ON / TEST

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2Black Round Plate 1X1 w
Open Stud
2 x Black 2x6 Plates
Cool White 30cm
Large Bit Light

LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Thread the wires
through the holes as
shown
Black 1x1 Modified Plate
Rounded with Handle
Black Arm Skeleton, Bent w
Clips (Horizontal Grip)
2x