Lightmybricks LEGO THE GUARDIANS' SHIP 76193 User manual

LEGO® THE GUARDIANS’ SHIP
#76193 LIGHT KIT
INSTALLATION GUIDE

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® THE GUARDIANS’ SHIP #76193
LIGHT KIT INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
The Guardians’ Ship (76193) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
21 x Cool White 30cm Bit Lights *
10 x Cool White 15cm Bit Lights *
5 x Cool White 30cm Large Bit Lights *
2 x Pink 30cm Bit Lights
1 x 6-Port Expansion Board
5 x 12-Port Expansion Boards *
• 1 × Plate 1x6 (any colour)
• 4 × Trans Light Blue Tile 1x2
1x Pulse Eects Board
4x Adhesive Squares
6 x 5cm Connecting Cables *
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been included just in case!

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 8
Final Product 40
Troubleshooting 41
Contact 46

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1
2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Pink 30cm Bit Light
Pink 30cm Bit Light

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
4
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
12-Port Expansion Board
Connect the
other end to a USB
Power Bank, USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
USB Power Cable

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
6 7
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
8
9
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Trans Light Blue Tile 1x2
Trans Light Blue Tile 1x2
Cool White 30cm Bit Light
Cool White 30cm Bit Light

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
11
12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 15cm Bit Light

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
13
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Cool White 30cm Bit Light
Trans Light Blue Tile 1x2

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Cool White 30cm Bit Light
Trans Light Blue Tile 1x2 Cool White 15cm Bit Light

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
15
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
16
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
5cm Connecting Cable
Pulse Eects Board
Connect the
other end of the 5cm
Connecting Cable
to the IN port on the
Pulse Eects Board

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
17
18
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Cool White 30cm Bit Light Cool White 30cm Bit Light

LEGO THE GUARDIANS’ SHIP 76193 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
19 20
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x Adhesive Squares
2x Cool White 30cm
Large Bit Lights