Lightmybricks LEGO SANTA'S VISIT 10293 User manual

LEGO® SANTA’S VISIT#10293
LIGHT KIT INSTALLATION GUIDE

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTALLATION GUIDE 2
Light My Bricks
LEGO® SANTA’S VISIT #10293 LIGHT KIT
INSTALLATION GUIDE
Hi There!
We’re here to help you get started on the LEGO®
Santa’s Visit (10293) Light Kit.
This PDF details the instructions for the LED light kit only. If
you are wishing to purchase this product, please click here
to view the product page.
If you run into any issues, please refer to the troubleshoot-
ing section towards the end of this guide.
Have fun and enjoy!

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
PACKAGE CONTENTS 3
PACKAGE CONTENTS: LEGO PIECES:
5 x Yellow 30cm Bit Light
3 x White 30cm Bit Light
2 x Orange 30cm Bit Light
5 x White 15cm Micro Bit Light*
2 x White 30cm Micro Bit Light*
1 x Multi Colour Light String
1 x 6-Port Expansion Board
1 x 8-Port Expansion Board
2 x Micro 4-Port Expansion Board
• 2 x Trans Clear Plate 2x2 w/ Rounded Bottom
1 x Flicker Eects Board
6 x Adhesive Squares
1 x 5cm Connecting Cable
1 x 15cm Connecting Cable
1 x 30cm Connecting Cable
1 x 50cm Connecting Cable
1 x USB Power Cable
(Power Source not Included)
* Indicates 1 extra component has been included just in case!

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
CONTENTS 4
Contents
Before You Begin 5
Instructions 9
Final Product 35
Troubleshooting 36
Contact 41

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 5
Before You Begin
Laying cables in between
and underneath bricks
Cables can fit in between and underneath
LEGO® bricks, plates, and tiles providing
they are laid correctly between the
LEGO® studs. Do NOT forcefully join
LEGO® together around cables; instead
ensure they are laying comfortably in
between each stud.
CAUTION: Forcing LEGO® to connect over
a cable can result in damaging the cable
and light.
Connecting Cable
Connectors To Expansion
Boards
Take extra care when inserting connectors
to ports of Expansion Boards. Connectors
can be inserted only one way. With the
expansion board facing up, look for the
soldered “=” symbol on the left side of the
port. The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into the
port. If a plug won’t fit easily into a port
connector, do not force it.
Incorrectly inserting the connector can
can result in bent pins inside the port or
possible overheating of the expansion
board when connected.

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 6
Before You Begin
Connecting Cable
Connectors To Strip Lights
Take extra care when inserting connectors
to ports on the Strip Lights. Connectors
can be inserted only one way. With the
Strip Light facing up, ensure the side of
the connector with the wires exposed is
facing down. If a plug won’t fit easily into
a port connector, don’t force it. Doing so
will damage the plug and the connector.
Connecting Micro Cable
Connectors To Micro
Expansion Board Ports
Take extra care when inserting the
micro connectors to micro ports of Micro
Expansion Boards. Connecting Micro Bit
Lights to Micro Expansion Boards is similar
to connecting lights and cables to Strip
Lights. With the expansion board facing
up, ensure the side of the connector with
the wires exposed is facing down. If a plug
won’t fit easily into a port connector, do
not force it. Use your fingernail to push the
plastic part of the connector to the micro
port.

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
BEFORE YOU BEGIN 7
Before You Begin
Installing Bit Lights Under
Lego® Bricks And Plates
When installing Bit Lights under LEGO®
pieces, ensure they are placed the correct
way up (Yellow LED component exposed).
You can either place them directly on top of
LEGO® studs or in between.

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 8
INSTRUCTIONS
To ensure a smooth installation of
your light kit, please read and follow
each step carefully. If you run into
any issues, please refer to the online
troubleshooting guide.

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 9
1 2
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 10
3
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 11
4 5
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x Adhesive Squares
Orange 30cm Bit Light
Orange 30cm Bit Light

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 12
6
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Press each Bit
Light down firmly
to ensure they are
well secured to the
Adhesive Square
Flicker Eects Board
White 15cm Micro Bit Light
Connect both
Orange Bit Lights to
the ‘OUT’ ports of
the Flicker Eects
Board

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 13
7
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Micro 4-Port Expansion Board
30cm Connecting Cable
2x

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 14
8
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
2x Adhesive Squares

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 15
9
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 15cm Micro Bit Light Micro 4-Port Expansion Board
2x
Connect the two
White 15cm Micro Bit
Lights to the small
ports.
Connect the other
end of the 30cm
Connecting Cable to
the large port.

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 16
10
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Micro Bit Light
11
Thread the
cables through this
part of the chimney
(excluding the White
30cm Micro Bit
Light)
5cm Connecting Cable
Connect the 5cm
Connecting Cable to
the ‘OUT’ port

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 17
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the
30cm Micro Bit Light
from the singular
candle behind the
window to the Micro
Expansion Board
15cm Connecting Cable
USB Power Cable
6-Port Expansion Board
Connect the
15cm Connecting
Cable to the ‘IN’ Port
on the Flicker Eects
Board
Slightly
disconnect the
fireplace frame
to enable you to
reconnect the grey
tiles and family
photo tile. Reconnect
the frame once the
tiles are in place

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
12
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
White 30cm Bit Light Trans Clear Round Plate
2x2 w/ Rounded Bottom
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
Connect to a
USB, Power Bank,
USB to AA Battery
Pack or USB Wall
Adaptor (each sold
separately)

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
8-Port Expansion Board
13

LEGO SANTA’S VISIT 10293 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 20
14
Legend DISCONNECT CONNECT /
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Yellow 30cm Bit Light
White 30cm Bit Light Trans Clear Round Plate
2x2 w/ Rounded Bottom