Lightmybricks 123 Sesame Street 21324 Light Kit User manual

INSTALLATION GUIDE 1LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO®123 Sesame Street
21324 Light Kit Installation
Guide

INSTALLATION GUIDE 2LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO®123 Sesame Street (21324)
Lighting Kit.
This PDF details the instructions for the
LED light kit only. If you are wishing to
purchase this LED Lighting Kit , please
click here to view the product page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
8 x White 30cm Bit Lights
2 x White 15cm Bit Lights
4 x Warm White 30cm Large Bit Lights
1 x Green Lamp Post w Large Bit Light Installed
2 x 6-Port Expansion Boards
1 x 8-Port Expansion Board
2 x 15cm Connecting Cables
1 x USB Power Cable
6 x Adhesive Squares
LEGO PIECES:
3 × Trans Clear 2x2 Plate w Rounded Bottom
1 × White Round Plate 1x1 w open stud
1 × Trans Dark Green Round Plate 1x1
1 × Green Round Brick 1x1
2 × Black Round Plate 1x1 w open stud
2 × Black Arm Skeleton, Bent w Clips (Horizontal
Grip)
 4×Black1×1ModiedPlateRoundedwithHandle

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
31. Final Product
32. Troubleshooting
37. Contact
CONTENTS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN

INSTALLATION GUIDE 7LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
1
STEPS
Green Lamp Post w Large
Bit Light Installed
Green Round Brick 1x1

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
2 3
STEPS

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
4
STEPS
8-Port Expansion Board
White 30cm Bit Light
Trans Dark Green Round
Plate 1x1

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 11
5
6
STEPS
USB Power Cable
Connect to a USB
Power Bank, USB to
AA Battery Pack or
Wall Adaptor
(each sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 12
7
STEPS
8
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
White 30cm Bit Light
x2

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
9
STEPS
10

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14
11
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
12 13
STEPS
Trans Clear Plate 2x2 w
Rounded Bottom
White 30cm Bit Light
Warm White 30cm Large Bit Light

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 16
14 15
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 17
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
16
17
STEPS
15cm Connecting Cable
Adhesive Squares x 2
6-Port Expansion Board

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 18
18
STEPS
White Round Plate 1x1 w
Open Stud
Warm White 30cm Large Bit Light
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 19
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
19
STEPS
20
White 30cm Bit Light

LEGO 123 SESAME STREET 21324 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 20STEPS
Black 1×1 Mod Plate Rounded w Handle x2
Black Round Plate 1x1 w open stud
Black Arm Skeleton, Bent w Clips
21 White 30cm Bit Light
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT