Lightolier ALTER SMARTVISION QVS2GPFOB2FT User manual

ALTER SMARTVISION
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 5 1/2” DEEP
MICROPERFORATED MESH LAMP SHIELD
STATIC
Efficiency 58.5%.
Broadcast 4: Broadcast control requires no programming of
the iGEN ballasts. Dimming message are sent with a global
address from the master Alter Smart Vision luminaire
to up to 3 slaves luminaire with an iGEN address able
ballast (DA). Each ballast receives the same command and
responds unifomity.
Swing down microperforated lamp shield for easy
relamping and maintenance.
Lamp shield specially cut to accomodate Smart
Vision sensor.
Alter soft white film on inside of mesh conceals lamp
image providing balance between reflected and
direct light.
Fully recessed luminaire and lamp compartment.
95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp
compartment.
Fits standard T-Grid ceilings.
Optional acrylic drop-down visual element.
MOUNTING METHODS/FEATURES DIMENSIONS
FIXTURE TYPE
JOB INFORMATION:
VOLTS
L10-80
QVS2GPFOB2FT
Swing down optical system for
easy relamping and maintenance
Microperforated mesh lamp shields
Ceiling compatibility
Suited to standard exposed T-grid
ceilings Suited to standard exposed Slot T-grid ceilings
2 x 40W
Genlyte Thomas Company
integrated motion and light sensor with
optional dimming infrared remote control

ORDERING INFORMATION Explanation of Catalogue Number Example: QVS2GPFOB2FT120DS
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge
cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte
paint finish. Specular aluminum interior reflector. Soft white acrylic film on
inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL
QVS2GPFOB2FT
QVS
QUALITY
VISUAL
STATIC
2
FIXTURE
WIDTH
G
CEILING
TYPE
PF
LAMP
SHIELD
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH
120
VOLTAGE
120
DS
OPTIONS
Standard exposed
T-grid ceilings
(NOMINAL 24”)
FT = TT5
Bi-tube
R =Radio Interface Filter
Recessed direct
indirect soft light
optical system
PF =Micro-
perforated
BALLAST TYPE
DS = Gen Broadcast 4 Sensor/ iGEN
ballast*
* For other voltage, consult your
Lightolier representative.
LAMP SHIELD DETAILS
OB =One-piece lamp
shield with sensor
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
ALTER SMART VISION
2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
OB 2 FT
2’
Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 - Tel. [phone]
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - [phone]