Vari Essential 401534 User manual

1
x1
SUPPORT BAR
x2
LEG
Secure the connecng brackets to the support bar using four (4) M8-20 Screws and the M4 Allen
key. If assembled correctly, the surface of the bar should be ush with the surface of the bracket,
not oset.
x1
M5 ALLEN KEY
x1
M4 ALLEN KEY
Essential Desk 48x24 Four Leg 2 People
Recommended
Holds up to
150 lb (68 kg)
M6-16 SCREW
x9 (1 spare)
M8-20 SCREW
x5 (1 spare)
Assemble the connecng bracket by placing the bracket cover over the insert nuts as shown
above (note the orientaon of the connecng bracket). Repeat the step for the second bracket.
2
x1
DESK TOP
x2
CONNECTING BRACKET
x2
BRACKET COVER
x1
M6 ALLEN KEYM6-65 SCREW
x8 (1 spare)
x8 (1 spare)
M6 WASHER

Using two people, aach the support beam assembly to the legs using eight (8) M6-16
screws and the included M5 Allen key as shown above; the side of the beam with more
holes should be posioned to face the boom of the desk top. Do not ghten completely.
3
Next, aach the assembled legs and support beam to the desk top using seven (7) of the M6-65 screws,
seven (7) of the M6 washers, and the M6 Allen key.
Conrm that all screws are in place. Then, use the corresponding Allen keys to ghten ALL screws.
Patent and trademark informaon: vari.com/patents | ©2021 Varidesk, LLC All rights reserved.
4
[phone]
5
Using two people, li and turn the desk over, and set it down gently on its feet. Adjust the
footpads to level the desk as needed. Your desk is now completely assembled and ready to use.