Lightolier Lytecel LCS6G20LW132 User manual

End of Row
Fixture
Screw
Continuous
Row Coupler
Side Rail Hold-down
Clip
coupler/clamp (LC 5 CLAMP)
(Order for end of row)
Features
• 48" long louver gives an uninterrupted louver appearance when
row mounted. Ideal for continuous row applications.
• 54.1% efficient (1 lamp) semi-specular louver.
• 57.6% efficient (1 lamp) specular louver.
• 1.7 spacing mounting ratio (1 lamp).
• Semi-specular or specular, low iridescence, pre-anodized
aluminum louver.
• Vertical grain on cross blades eliminates reflected lamp image.
• Spring loaded latches (self centering).
• Louver has protective dust guard.
• Only 5-1/2" deep body.
• Black housing exterior for cooler ballast operating temperature.
• UL-Listed twin knockout access plate.
• Meets NYC Code requirements.
• Construction to meet Chicago Plenum Code is available.
• Optional DALI ballast accepts digital dimming commands from
computers, scene controllers and automatic control devices.
Mounting Methods Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte company www.lightolier.com
Technical In ormation: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details o design, materials and inish.
© 2007 a Genlyte company Section 2/Folio G07-40
3/07
Lytecel Recessed Fluorescent LCS6G20LW132
Page 1 o 2 For Continuous Row Mounting, 6" wide x 48", 20 Cell (1 Row) Parabolic Louver,
Air Return/Static, 1 Lamp T8, IES RP1 For VDT Areas
Gexposed T-grid ceiling.
6"
15/16"
or
9/16"
Texposed slot T-grid ceiling.
2" max.
9/16"
2" max.
6"
Screw
Fixture
Fixture
Continuous
Row Coupler
Hold-down
Clip
Side
Rail
continuous row coupler locks fixtures together for a continuous line of light
without cell configuration interruption (supplied with fixture)
Hold-down
Clip
Hold-down
Clip
5-1/2"
(139mm)
4-1/4" (108mm)
6" (162mm)
LC6
End
Trim
End Trim
required for
beginning and
end of row.
Order Catalog
Number:
LC6 END TRIM
48"
(1220mm)
48"
(1220mm)
NOTE:
If product is to be mounted individually,
use LI series, Folio G07-32.
Joint of Two Units
2" x 2-1/2" Access Plate
with (2) 7/8" K.O.s
7-3/8"
(187mm)
48" (1220mm)
39-1/4" (997mm)
Air Return Slots
(LCA only)
1-3/4" (44mm)

Lytecel Recessed Fluorescent LCS6G20LW132
Page 2 o 2 For Continuous Row Mounting, 6" wide x 48", 20 Cell (1 Row) Parabolic Louver,
Air Return/Static, 1 Lamp T8, IES RP1 For VDT Areas
Lightolier a Genlyte company www.lightolier.com
Technical In ormation: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details o design, materials and inish.
© 2007 a Genlyte company Section 2/Folio G07-40
Job Information Type:
Ordering Information
Explanation o Catalog Number. Example: LCS6G20LW132120SO
Options/Accessories
Access Plate: Top Wiring access plate is shipped with fixture as standard. When
access plates are required in advance for wiring convenience, specify separately.
Order Catalog Number: ACP5 CSP.
Coupler/Clamp: (Set of 2) Required for beginning of rows.
Order Catalog Number: LC 5 CLAMP (for G or T type)
End Trim: Required at beginning and end of rows. For every row order (2).
Order Catalog Number: LC6 END TRIM.
Electrical/Wiring Options: Consult factory.
EM Pack or Dimming Ballast: Consult factory.
Fusing: Internal fast-blow fusing. Suffix: GLR.
Internal slow-blow fusing. Suffix: GMF.
Chicago Plenum: Suffix: CP.
Specifications
Performance: In an installation of 1 lamp 32W semi-specular luminaires in a
room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U.
shall not be less than .58 with a spacing to mounting ratio of 1.7 perpendicular
to the lamps. To meet IES RP-1 for VDT areas the VCP (visual comfort
probability) shall not be less than 91 either crosswise or lengthwise and the
candela value between 55° and 90° in the 0° to 90° planes shall not exceed
2521. Candelas at Nadir (0°) not to exceed 633.
Specifications (continued)
Air Handling–(LCA only) Side air passages for air return.
Materials: Chassis parts are die-formed cold rolled steel.
Louver: Pre-anodized aluminum (Coilzak®or equal).
Finish: Louver—specular or semi-specular low iridescence pre-anodized
reflector sheet. Reflector: White baked polyester enamel. Chassis exterior—
black baked polyester enamel.
Electrical: Thermally protected class “P” ballast C.B.M. approved, non PCB. If
K.O. is within 3" of ballast, use wire suitable for at least 90°.
Labels: I.B.E.W./UL and ULc Listed.
This product may have a mercury containing lamp. Manage in accord with
Disposal Laws. See: www.lamprecycle.org
LC
Lytecel 6"
Continuous
Louver
Appearance
6
Fixture
Width
20
Number of
Cells:
1 row o
20 cells
Louver Finish:
L=Low
Iridescence
Semi- specular
P=Low
Iridescence
S pecular
W1
Lamp
Quantity:
(By others)
1=1 Lamp
32
Lamp Fixture
Length:
32=T8
(Nominal 48")
Ballast Type:
<20THD <10THD
1 Lamp Elec. T8 SO* HI*
*Instant Start Standard
Other dimming options, consult actory.
NOTE:
For T UNV, you must use HIBallast Code.
DA=DALI digital addressable dimming.
Options:
Add appropriate
su ix to catalog
no, ie: (GLR)
Voltage:
120, 277 or
UNV=120-277
0.0 45.0 90.0 FLUX
0 633 633 633
5 630 628 635 60
15 590 619 660 175
25 539 599 694 285
35 473 621 760 388
45 373 554 581 389
55 231 260 203 212
65 12 32 21 28
75 2354
85 1121
90 011
Model No. LCS6G20LW132120SO
LER = FP - 43.4 IW - 39.00 BF - 1.10
Comparative yearly lighting energy cost per
1000 lumens = 5.53
Report Number: G1206002
Catalog Number: LCS6G20LW132120SO
Lamp: F32 T8
Luminaire: 6" wide Troffer with semi-
specular louver and white reflector.
Ballast: Advance REL-2P32-SC
Report is based on 2850 Lumens per lamp.
Efficiency: 54.1%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.7
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 47.943 5.816
CANDELA DISTRIBUTION
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 2929. 4350. 4564.
55 2242. 2521. 1969.
65 162. 419. 270.
75 39. 55. 104.
85 33. 69. 103.
LUMINANCE DATA IN CANDELA/SQ. METER
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.200
RC 0 50 30
RW 70 50 30 50 30 10 50 30 10
1 60 58 57 55 54 53 53 52 51
2 56 53 50 50 48 46 48 46 45
3 52 47 44 45 42 40 44 41 39
4 48 43 39 41 37 35 39 37 34
5 44 38 34 37 33 31 36 33 30
6 41 35 30 33 30 27 33 29 27
7 38 32 27 30 27 24 30 26 24
8 36 29 25 28 24 22 27 24 21
9 33 27 22 26 22 19 25 22 19
10 31 24 20 24 20 18 23 20 18
ZONE LUMENS % LAMP % FIXT
00-030 0520 18.3 33.7
00-040 909 31.9 58.9
00-060 1510 53.0 97.9
00-090 1542 54.1 100.0
90-180 0000 0.0 000.0
00-180 1542 54.1 100.0
ZONAL LUMEN SUMMARY
0.0 45.0 90.0 FLUX
0 662 662 662
5 641 643 664 61
15 630 644 652 181
25 556 620 712 292
35 487 678 821 416
45 398 623 647 430
55 269 293 208 236
65 1 29 17 21
75 0253
85 0121
90 111
Model No. LCS6G20PW132120SO
LER = FP - 45.8 IW - 39.0 BF - 1.10
Comparative yearly lighting energy cost per
1000 lumens = 5.24
Report Number: G1206003
Catalog Number: LCS6G20PW132120SO
Lamps: F32 T8
Luminaire: 6" wide Troffer with specular
louver and white reflector.
Ballast: Advance REL-2P32-SC
Report is based on 2850 Lumens per lamp.
Efficiency: 57.6%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.7
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 47.943 5.816
CANDELA DISTRIBUTION
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.200
RC 0 50 30
RW 70 50 30 50 30 10 50 30 10
1 64 62 60 59 57 56 56 55 54
2 60 56 53 53 51 49 51 49 47
3 55 50 46 48 45 42 46 44 42
4 51 45 41 43 40 37 42 39 36
5 47 41 36 39 35 32 38 35 32
6 44 37 32 35 31 29 34 31 28
7 41 33 29 33 28 25 31 28 25
8 38 31 26 29 26 23 29 25 23
9 35 28 24 27 23 20 26 23 20
10 33 26 21 25 21 19 24 21 18
ZONE LUMENS % LAMP % FIXT
00-030 535 18.8 32.6
00-040 950 33.3 57.9
00-060 1617 56.7 98.5
00-090 1641 57.6 100.0
90-180 0000 0.0 000.0
00-180 1641 57.6 100.0
ZONAL LUMEN SUMMARY
Reflector:
W =White
Mounting Height
Lengthwise Crosswise
Room Luminaires Luminaires
Size 0 Deg Plane 90 Deg Plane
.5 10 .5 10 .5 10 .5 10
30x30 91 88 87 82 92 88 86 80
40x40 92 88 87 85 94 88 88 84
60x30 92 88 87 84 93 88 86 81
60x60 92 88 87 85 94 90 88 85
100x100 91 89 88 85 95 92 88 86
TYPICAL V.C.P.'s
Mounting Height
Lengthwise Crosswise
Room Luminaires Luminaires
Size 0 Deg Plane 90 Deg Plane
.5 10 .5 10 .5 10 .5 10
30x30 90 82 82 81 93 88 85 78
40x40 91 82 82 83 94 88 87 82
60x30 91 82 82 83 93 88 86 80
60x60 91 82 83 83 94 90 87 84
100x100 91 82 83 93 95 91 89 85
TYPICAL V.C.P.'s
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 3130. 4896. 5087.
55 2605. 2838. 2018.
65 8. 379. 217.
75 10. 53. 98.
85 23. 67. 113.
LUMINANCE DATA IN CANDELA/SQ. METER
Body Style:
A=Air Return
S=Static
Standard Lytecel
LC
For NYC Code – Local 3 Manufactured
LN
Ceiling Type:
G= 9/16" or
15/16"Grid
T= Slot Grid