Home Styles 20 05525 0942 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Cartons 20 05525 0941 and 0943 are also needed for assembly.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
C.
Middle Panel
1 pc.
D.
Side Panel
1 pc.
B.
Side Panel
1 pc.
F.
Back Panel
1 pc.
E.
Back Panel
1 pc.
Cam Lock Screw
28 pcs. (+2 extra)
Cam Lock
28 pcs. (+6 extra)
Flat Washer
8 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
16 pcs. (+1 extra)
Knob
1 pc.
Handle
4 pcs.
M3.5x25
Wood Screw (long)
40 pcs. (+1 extra)
M3x15
Wood Screw for Magnet
2 pcs. (+1 extra)
Magnet
1 pc.
M6x35
Long Screw
8 pcs. (+1 extra)
M4x28
Machine Screw
9 pcs.
20 05525 0942
Kitchen Island
Adjustable Pin
8 pcs. (+1 extra)

Assembly Instructions 2/7
Figure 1
Cam Lock Screw
Cam Lock Screw
I
C
BD
E
Cam Lock Screw
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Side Panels (B), (D), Middle Panel (C),
Back Panel (E) and Base (I), then tighten.
(See Figure 1)
Cam Lock Screw
A

Assembly Instructions 3/7
Cam Lock
STEP 2
Attach Back Panel (E) to
Side Panel (B) with Cam Locks.
(See Figure 2)
Attach Back Panel (F) to
unit with Cam Locks.
Cam Lock
E
F
C
G
B
H
Figure 2
STEP 3
Attach Front Rail (H) to Middle Panel (C).
Attach Front Rail (G) to Middle Panel (C)
with Cam Lock.
Attach unit from Step 3 to unit from
Step 2 with Cam Locks.

Assembly Instructions 4/7
STEP 4
Attach Side Panel (D) to unit
with Cam Locks.
Cam Lock
D
STEP 5
Attach Base (I) to unit with Flat Washers,
Long Screws and Cam Locks. (See Figure 3)
Attach Magnet to unit with Wood Screws
for Magnet into pre-drilled holes,
then tighten. (See Figure 4)
Figure 3 Figure 4
Long Screw
Flat Washer
I
Cam Lock
Wood Screw for Magnet Magnet

Part List
Assembly Instructions 5/7
L1.
Drawer Front
2 pcs.
L2.
Drawer Back
2 pcs.
L3.
Drawer Side
2 pcs.
L4.
Drawer Side
2 pcs.
L5.
Drawer Bottom
2 pcs.
STEP 8
Attach Handle with Machine Screws.
STEP 7
Slide Drawer Bottom (L5) into groove.
Attach Drawer Bottom (L5) to
unit with Wood Screws (short).
STEP 6
Attach Drawer Front (L1) and
Drawer Back (L2) to Drawer Side (L3)
with Wood Screws (long).
Attach Drawer Side (L4) to unit
with Wood Screws (long).
Roller at backWood Screw (long)
Drawer (L)
L3
L1
L2 L4
Bottom
L5
Wood Screw (short)
Machine Screw
Handle

Part List
Drawer (M)
STEP 11
Attach Handle with Machine Screws.
STEP 10
Slide Drawer Bottom (M5) into groove.
Attach Drawer Bottom (M5) to
unit with Wood Screws (short).
STEP 9
Attach Drawer Front (M1) and
Drawer Back (M2) to Drawer Side (M3)
with Wood Screws (long).
Attach Drawer Side (M4) to unit
with Wood Screws (long).
Assembly Instructions 6/7
Bottom
M1
M2
M3
M4
Machine Screw
Handle
M1.
Drawer Front
2 pcs.
M2.
Drawer Back
2 pcs.
M3.
Drawer Side
2 pcs.
M4.
Drawer Side
2 pcs.
M5.
Drawer Bottom
2 pcs.
Wood Screw (short)
M5
Roller at back
Wood Screw (long)

Assembly Instructions 7/7
STEP 12
Turn unit from Step 5 over to its’ upright position.
Attach Top (A) to unit with Cam Locks.
Insert Adjustable Pins into side panel and middle panel at desired level.
Place Shelves (K) into position.
Attach Door (J) to unit by sliding door hinges into side panel hinges. (See Figure 5)
Attach Knob to Door (J) with Machine Screw. (See Figure 6)
Slide Drawers (L) and (M) into position.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)
Note: Unit must be level to work properly.
Figure 5 Figure 7
Figure 6
Cam Lock
A
M
M
LL
K
KJ
Knob
Machine Screw
Adjustable Pin

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319