Lightolier Lytespan 7644 User manual

11 3/8"
6 3/8"
4"
4 3/4" Dia.
2
1
5
13
14
12
18
4
83
7
16
10
9
11
15
6
Lytespan®Track Lighting System 7644
Page 1 of 2 Dramalux Framing Projector
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lig tolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax (508) 67 - 710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Lytespan Attac ment Fitting: molded polycarbonate, .075” wall thickness.
Integral color.
2. Lever: energizes unit.
3. Movable Brass Contact: extends for connection to 2nd circuit in Advent
Lytespan Track.
4. Knurled Tig tening Knob
5. 8-32 Hex Set Screw: for positive horizontal locking.
6. T umbscrew: loosens to remove front of housing for relamping.
7. Pivot Mounting: permanently-tensioned; 350° stop for horizontal rotation
8. Expansion Clamp: fingertip squeeze-release for quick attachment; thumb-
screw lock for rigid mounting.
9. Adjustable S utter Blades (4): spring steel with insulated hand knob.
Shapes light beam.
10. Optical System
11. Focusing Lens
12. Front Sleeve: .035” steel.
13. Yoke: .093” steel.
14. Trunion Mounting: permanently-tensioned with internal spring washer and
vibration-resistant nut.
15. Clip: holds templates for round or elliptical shapes.
16. Wing Nuts (2): allow optical system to be removed for relamping without
disturbing shutter blades.
17. Polarity Keyway
18. Lamp
Electrical
Double Contact Bayonet spring loaded. No. 18 braided SF-1 leads, with
fiberglass braided outer sleeve.
Finis
All painted finishes baked enamel.
Labels
UL, I.B.E.W.
Catalog No. Finis es Mounting Lamps
7644 Matte Black All Lytespan Track 150W T Clear, Type ESP
7645 Matte White Systems (Tungsten-Halogen)
Double Contact Bayonet Base
Ordering Information

Lytespan®Track Lighting System 7644
Page 2 of 2 Dramalux Framing Projector
Lig tolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax (508) 67 - 710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Job Information Type:
24"
30°45°60°
18" 20" 24"
26" 34" 62"
11" 18" 26"
141 74 25
219 115 39
Distance (D)
Aiming
Angle (A)
Width (W)
(Max.)
Length (L)
(Max.)*
Distance (C)
(Min.)
F.C. on
Beam
Axis
100W
150W
36"
30°45°60°
28" 31" 36"
40" 52" 94"
12" 23" 36"
59 31 11
92 48 17
48"
30°45°60°
38" 41" 49"
54" 71" 127"
14" 28" 45"
32 17 6
50 26 9
60"
30°45°60°
48" 52" 61"
68" 89" 160"
16" 33" 54"
20 11 4
31 17 6
72"
30°45°60°
58" 63" 74"
82" 108" 195"
17" 38" 63"
14 7 3
22 11 5
84"
30°45°60°
68" 74" 86"
96" 127" 225"
19" 43" 72"
10 5 2
16 8 3
96"
30°45°60°
78" 84" 99"
110" 145" 257"
20" 48" 82"
84 1
12 6 2
* Length (L) to the point where illumination drops to 10% of illumination on beam axis.
Distance (D) 4' 5' 6' 7' 8' 9' 10' 11' 12'
Side (A) 32" 42" 52" 62" 72" 81" 91" 101" 111"
(Max.)
F.C. on 100W 70 41 27 19 14 11 8 7 6
Beam
Axis 150W 109 64 42 30 22 17 12 11 9
Lamp Max. Beam Spread* CBCP (Candelas) Rated Lamp Life
100W T4 Clear (Tungsten-Halogen) 45" (Square) 717 1,000 hrs.
150W T4 Clear (Tungsten-Halogen) 45" (Square) 1,115 1,000 hrs.
D
L
W
FC
C
H
S
S
FC
A
* Shutters fully open
Lig ting Data
Illumination on Horizontal Plane – S utters Fully Open for Maximum
Beam Coverage Aiming Angle: 0° from Vertical
Illumination on Vertical Plane - S utters Fully Open for Maximum Beam Coverage
Problem: Provide approximately 30 f.c. on a painting 22” wide
by 36” high mounted 30” from the ceiling. Solution: Mount the
Framing Projector 2 ” from the picture and aim it 60° from
horizontal (optimum for picture lighting) to light an area 2 ” wide
by 62” high, 26” from the ceiling. The shutters are used to reduce
the lighted area to the size of the painting. The illumination
on the beam axis will be: 25 f.c. with the 100W lamp, 39 f.c. with
the 150W lamp.