Lightolier Calculite C4X4MRA User manual

Calculite Matrix HID Adjustable Accent C4X4MRA
Page 1 of 2 4½" X 4½" Square Aperture (1) CMH MR16
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • C0810
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Ordering Information
Frame-In Kits Reflector Trims Finish/Flange Lamp
C4X420MREU Electronic 120/277V
C4X439MREU Electronic 120/277V
C4X4MRACLW
C4X4MRACLP
C4X4MRACCLW
C4X4MRACCLP
C4X4MRACCDW
C4X4MRACCDP
C4X4MRAWHW
Specular Clear/White
Specular Clear/Polished
Comfort Clear/White
Comfort Clear/Polished
Comfort Clear Diffuse/White
Comfort Clear Diffuse/Polished
White/White
(1) 20W MR16 CMH GX10 Base
(1) 39W MR16 CMH GX10 Base
Ceiling Cutout: 5 1/4" x 5 1/4" (130 mm x 130mm) Dia.
8.16"
9.66"
8"
9.66"
2"
Max. Ceiling
Thickness
5.75"
4.5"
Features
1. Reflector Trim: 55° physical and reflected cutoff. Available with integral
flange in painted white or polished to match inside of cone.
2. Lamp Holder/Trim Adjustment Assembly: Unitized optics ensure
alignment of lamp and aperture cone regardless of ceiling thickness. Soft
focus lens ships standard. Adjust trim kit vertically to accommodate up to 2"
thick ceiling.
3. Socket: Twist and lock base. 5kV (600V) pulse rated PPS, black T240 body
socket with nickel-plated contacts. 18 AWG silicone leads with fiberglass
outer sleeve.
4. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.
5. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or ½" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside the fixture.
6. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
7. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
8. Ballast/Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement.
9. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
10. Thermal Protector: Meets NEC and UL requirements. Do not install
insulation above nor within 3" (76mm) of any part of the luminaire.
Features (continued)
11. Electronic Ballast: 120 or 277V, 50/60 Hz., encased, high power factor
>0.99, THD <10%, thermally and transient protected, RMI/RFI complies with
FCC Part 18 non-consumer limits, shut-down at end of lamp life, sound rating
“A", Minimum starting temperature -30°, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
20W MH M156 120/277V 0.20/0.09 22
Labels
UL, cUL (Suitable For Damp Locations)

Job Information Type:
Calculite Matrix HID Adjustable Accent C4X4MRA
Page 2 of 2 4½" X 4½" Square Aperture (1) CMH MR16
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • C0810
(FC) is initial footcandles
at center of beam. Beam
length (L) and beam width
(W) are to where the
candlepower is reduced
to 50% of the center beam
candlepower. (C) is the
distance to the center of
the beam.
1500
3000
4500
6000 30°
60°
4 ½" x 4 ½" Aperture 20W CMH MR16-12°
2600
1950
1300
650
30°
60°
4 ½" x 4 ½" Aperture 20W CMH MR16-25°
500
1000
1500 30°
60°
4 ½" x 4 ½" Aperture 20W CMH MR16-40°
20W G.E.HID MR16 12° SP,
GX10 BASE
Lamp @ 30° Vertical Tilt
Lumen Rating = 1000 LMS.
CBCP = 5894 CD
Beam Angle = 12°
Test Report No. 3420FR
Angle CP
0 124
5 197
10 270
15 501
20 1211
25 3241
30 5894
35 3925
40 1293
45 239
50 54
55 0
60 0
65 0
70 0
75 0
80 0
85 0
90 0
30° Aiming Angle - Horizontal Surface
D C FC L W
6' 3.5' 106 1.7' 1.5'
8' 4.6' 60 2.3' 1.9'
10' 5.8' 38 2.8' 2.4'
12' 6.9' 27 3.4' 2.9'
14' 8.1' 20 3.9' 3.4'
30° Aiming Angle - Vertical Surface
D C FC L W
2' 3.5' 184 1.7' 0.8'
3' 5.2' 82 2.6' 1.3'
4' 6.9' 46 3.5' 1.7'
5' 8.7' 29 4.3' 2.1'
6' 10.4' 20 5.2' 2.5'
Angle CP
0 198
5 254
10 418
15 904
20 1794
25 2485
30 2601
35 2385
40 1198
45 290
50 19
55 3
60 3
65 1
70 1
75 1
80 1
85 1
90 1
20W G.E.HID MR16 25° FL,
GX10 BASE
Lamp @ 30° Vertical Tilt
Lumen Rating = 1000 LMS.
CBCP = 2601 CD
Beam Angle = 22°
Test Report No. 3419FR
30° Aiming Angle - Horizontal Surface
D C FC L W
6' 3.5' 47 3.6' 3.1'
8' 4.6' 26 4.8' 4.1'
10' 5.8' 17 6.0' 5.1'
12' 6.9' 12 7.2' 6.1'
14' 8.1' 9 8.4' 7.2'
30° Aiming Angle - Vertical Surface
D C FC L W
2' 3.5' 81 4.2' 1.8'
3' 5.2' 36 6.2' 2.7'
4' 6.9' 20 8.3' 3.5'
5' 8.7' 13 10.4' 4.4'
6' 10.4' 9 12.5' 5.3'
Angle CP
0 101
5 172
10 364
15 717
20 1113
25 1368
30 1450
35 1430
40 1329
45 769
50 290
55 17
60 3
65 1
70 1
75 1
80 0
85 0
90 1
20W G.E.HID MR16 40° WFL,
GX10 BASE
Lamp @ 30° Vertical Tilt
Lumen Rating = 1000 LMS.
CBCP = 1450 CD
Beam Angle = 30°
Test Report No. 3417FR
30° Aiming Angle - Horizontal Surface
D C FC L W
6' 3.5' 26 4.4' 3.7'
8' 4.6' 15 5.9' 5.0'
10' 5.8' 9 7.3' 6.2'
12' 6.9' 7 8.8' 7.4'
14' 8.1' 5 10.2' 8.7'
30° Aiming Angle - Vertical Surface
D C FC L W
2' 3.5' 45 5.5' 2.1'
3' 5.2' 20 8.2' 3.2'
4' 6.9' 11 10.9' 4.3'
5' 8.7' 7 13.7' 5.4'
6' 10.4' 5 16.4' 6.4'