Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • A0706
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan®Track Lighting 9178
Page 1 of 2 MiniFormTM Mesh MR16
¡
10
1
2
3
4
5
6
7
9
8
51/2
2
1
/
4
3
3
/
4
2
3
/
4
¢
¢
Features
1. Lamp Bracket: Stamped steel with insulated end knob made of high tem-
perature silicone rubber which allows for aiming adjustments while fixture
is on.
2. Socket: Bi-pin base ceramic socket wired with No. 18 stranded Teflon leads
with fiberglass outer sleeve.
3. Transformer: Electronic low voltage transformer with integral radio fre-
quency interference filter and anti-crossover circuit for increased reliability;
housed in extruded aluminum.
4. Track Attachment Fitting: Molded polycarbonate, rotates into track and
locks on with push tab; integral polarity key guard.
5. Push Tab: Locks and detaches unit from track.
6. Brass Contact: Extends up for connection to second circuit when used with
Advent®Lytespan track.
7. Tension Pivot Mounts: Steel. Allows for 180° horizontal rotation and 180°
vertical rotation.
8. Lamp Guard: Tempered glass; can be substituted with 2" filter.
9. Spring: Steel springs hold lamp in place.
10. Housing: Steel wire mesh.
Electrical/Dimming
Dimming controls: Use only dimmers specifically designed for use with
electronic transformers, like Lightolier SunriseTM and Neptune Momentum QETM
series. Low voltage fixtures may produce audible sound when used with dim-
mers, which may be objectionable in acoustically critical areas.
Labels
UL
¡
10
1
2
6
7
9
8
51/2
2
1
/
4
3
3
/
4
2
3
/
4
¢
¢
Ordering Information
Catalog No. Finishes Track Mountings Lamps
9178WH Matte White All Lytespan MR16
9178BK Matte Black Track Systems 50W Max.
9178AL Metallic Aluminum
Advent®is a registered trademarl of Lightolier.
