Lightolier D13 User manual

Lightolier is a Philips group brand
Architectural Decorative Vetro Downlight D13
Page 1 of 1 Evolution, Low Voltage
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0408
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Features
1. Decorative Element: Solid high temp, UV resistant composite with open
aperture. Interior diameter is frosted. Polished exterior.
2. Aluminum Insert: Satin Aluminum ring is mechanically inserted in
composite to create drama and intrigue in the element.
3. Die Cast Ring: Exterior edge of construction ring is visible, satin aluminum
finish matches diameter of decorative element for a flangeless appearance.
4. Integral Reflector: 16 ga. aluminum, 50° visual cutoff to lamp and lamp
image. Decorative Element is mechanically attached to reflector via die cast
ring. Reflector is specular clear for best performance and aesthetics.
5. Cover Glass: 3" Evolution contains high temperature soft focus lens. 4"
Evolution contains high temperature perimeter frost.
6. Trim Kit: For 3" and 4" Evolution, trim kit, reflector and decorative element
ship complete.
7. Frame-In Kit: Specified separately. See Trim Kit Specification Sheet
for details.
Mechanical
Decorative element is mechanically secured to the die cast construction ring and
the integral reflector from the factory.
Labels
U.L. (Damp Location)
Decorative Element/Trim Kit
Catalog No.
Frame-In Kit Lamping Dimensions
A B C
3" Evolution D3MR13 C3LV; C3AICLV; C3ALV; C3LVE1; C3LVE2; C3ALVE1; C3AICLVE1; C3ALVE2 50W MR16 3 5/8" 6 1/2" 2 1/4"
4" Evolution D4MR13 C4LV; C4ALV; C4AICLV 50W MR16 5" 8" 2 3/8"
Complete fixture consists of Decorative Element/Trim-Kit + Frame-In Kit. Each sold seperately.
2 Piece Ordering System, Example: D3MR13+ C3LV
C
B
A
3
1
2