Lightolier Lytecaster 1062LV User manual

70˚
Lytecaster®Recessed Downlighting 1062LV
Page 1 of 2 5” Aperture Low Voltage Elbow Reflector Trim
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • G0811
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
1062LV/1000LV
Standard MR16
1062LV/1000LVR
Remodeler/Non-IC
6 5/8”
6 5/8”
1062LV/1000LVNT
MR16 Remote
Transformer
6 5/8”
7 1/4”
1062LV/1004ICV/N
0™AirSeal®
Insulated Ceiling
Features
1. Housing: Hydroformed aluminum, .040” thick (18 ga.): matte white trim
flange.
2. Elbow: Seamless; die cast aluminum with stepped conical baffle for low
brightness. Matte white finish outside; matte black inside.
3. Support Ring Assembly: Provides 358° horizontal rotation and 0° to 70°
vertical adjustment. Matte white finish.
4. Frame-In Kit: (1000LV standard frame shown) Other frames listed above and
shown on the right. See Frame-In Kit specification sheets for more details.
Options & Accessories
Retaining Clips: 1955 - For Installing in Existing Ceiling.
MR16 Framing Projector: 6497 - Attaches to elbow
Extra Wide Trim Flange: 1957 - 7" Outside diameter.
MR16 Replacement Socket: 1975A
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
1062LV
Matte White
Low Voltage
Frame-In Kit Ceiling Type Lamping Height
1000LV
1000LVR
1000LVE1
1000LVE2
1000LVRE1
Non-IC
Non-IC Remodeler
42W - 75W MR16 6 5/8"
1000LVNT Non-IC Remote Trans 20W - 65W MR16 6 5/8"
1004ICV/N AirSeal®IC 20W - 50W MR16 7 1/4"
1000ICV
1920LV (1002P1)
IC
Conversion Kit 20W- 35W MR16 7 5/16"

70˚
Lytecaster®Recessed Downlighting 1062LV
Page 2 of 2 5” Aperture Low Voltage Elbow Reflector Trim
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • G0811
Job Information Type:
To convert lighting data for a lower wattage incandescent lamp of the same type,
multiply the footcandle (or candlepower) values by the ratio of the lumens of the
two lamps. The coefficients of utilization remain the same.