Lightolier Lytespan 6170 User manual

Ordering Information
Catalog No. Finish Junction Box Mounting Compatibility
6170WH Matte White 4” & 3 1/2” Octagonal, 4” & 3 1/2” Round Lytespan Track Luminaires. See individual
6170BK Matte Black spec sheets for compatibility with Monopoints
6170AL Matte Aluminum
3 1/4"
3 1/4"
3 1/2" Dia. J-Box Mounting Slots
4
3
2 5/16"
5 5/8"
2 1/4"
4 1/2"
2
1
5
Junction Box
(by others)
ceiling
or wall
1/4"
ceiling
or wall
Lytespan®Track Lighting System 6170
Page 1 of 1 Lytespan®Rectangular Monopoint
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • A1005
Features
1. Basic Lytespan Track Strip: Die-cast with high-temperature impact-resis-
tant thermoplastic insulator, supporting electrical contacts. Accepts Lytespan
luminaires for individual applications.
2. Junction Box Canopy: Steel low-profile canopy, attached with two painted
slotted cap screws (provided).
3. Crossbar: 0.074 steel, permanently fixed to track. Provides secure mounting
of monopoint to electrical junction box.
4. Supply Leads: 16ga. White and Black, Green; insulated stranded wire.
5. Locking Slot: Accepts locking tab of some Lytespan Track luminaires.
Finish
All Painted finishes are baked enamel.
Electrical
Capacity is 120volts, 60Hz, 660W max. All Lytespan Track luminaires are polar-
ized and continuously grounded throughout. Electrical conductors are concealed
in an insulating liner. Intended for wiring to branch circuit building wire with
ground. All wiring must be in accordance with National and Local Codes.
Use 90°C minimum supply wire to monopoint.
Labels
U.L. listed, cULus