Lightolier Calculite S7132BU User manual

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0708
Calculite®CFL Recessed Downlighting S7132BU
Page 1 of 1 7" Aperture Triple Tube Frame-In Kit
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
7 3/8" Frame Dia. (181mm)
26/32W=10 3/8"
(264mm)
8 5/8" Frame Dia. (209mm)
OVERLAP
Top View
14 7/8"
(378mm)
9 3/8"
(238mm)
11 3/4"
(298mm)
3" (264mm)
1 1/8" (29mm) MAX
CEILING THICKNESS
Frame-In Kit Compatible Reflector Trims
S7132BU Electronic 120V-277V
26, or 32W Triple Tube
4-Pin (Amalgam)
Downlights Wall Washers
8022 Open, Vertical Lamping
8037 Open, Horizontal Lamping
8097 Lensed, Horizontal Lamping
8097CB Cross Blade, Horizontal Lamping
8097TB Parabolic Louver, Horizontal Lamping
8022WW Open, Single, Vertical Lamping
8022DW Open, Double, Vertical Lamping
8022CW Open, Corner, Vertical Lamping
8087 Open, Horizontal Lamping
8047 Lensed
Ceiling Cutout: 8" (203 mm) Dia.
Shown with 8022 trim kit
Features
1. Socket Cup: Snaps onto reflector neck to assure consistently correct
optical alignment without tools.
2. Mounting Frame: Galvanized stamped steel for dry or plaster ceilings.
3. Retaining Springs: Precision-tooled steel friction springs secure reflector
to mounting frame for quick, tool-less installation.
4. Mounting Brackets: Galvanized steel. Adjust from inside of fixture.
Use 3/4" or 1 1/2" lathing channel, 1/2" EMT, or optional mounting bars.
5. Ballast/J-Box: Electronic 120V - 277V. UL listed for through branch circuit
wiring with max of (8) No. 12 AWG, 90°C supply conductors. Outboard
mounted to reduce heat transfer and maintain lamp efficacy and life. Service
from below without tools.
Note: For ballast electrical data and latest lamp/ballast compatibility refer to
“Ballast” specification sheet for complete electrical data.
Options & Accessories
S7132BU 7" aperture, 1 lamp 26/32/42W Triple Tube CFL (120/277V)
4-Pin (Amalgam)
Dimming Options:
S7132B
CU3 Lightolier PowerSpec 3% Dimming (120/277V)
J1LD3 Lutron 3% Dimming (120V) J2LD3 Lutron 3% Dimming (277V)
JUM7 Mark 7 Dimming (120/277V) J1MX Mark 10 Dimming (120V)
J2MX Mark 10 Dimming (277V)
Other dimming product available, please consult factory
Options & Accessories (continued)
Mounting Bars: 1950 - 18" Set of (2)
1951 - 27" Set of (2)
T-Bar Anchor Clips: 1956 - Set of (4), for use with above
Slope Ceiling Adapter: 7926 Series, (See specification sheet SCA)
Labels
UL, CUL listed for damp locations