Lightolier SW STRIP User manual

Standard Strip Wide SW STRIP
Page 1 o 2 4-1/8" Wide X 1-7/8" Deep X 24", 36", 48", 72" or 96" Lenghts
1 or 2 Lamp, T8 or T12
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
For Factory Technical In ormation: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details o design, materials and inish.
www.lightolier.com © Philips Group Secti n 3A/F li H100-42 Rev. C
Features
• Fixtures suitable for individual, row, surface, or suspension mounting.
• Efficiency 97.3% (T8).
• Quarter turn latch secures channel cover for easy wireway access.
• Heavy duty channel of code gauge die formed steel.
• Fully enclosed wiring.
• U.L. Listed snap-on end caps.
• Combination end cap for continuous row mounting.
• Green grounding screw installed in channel.
• Lampholders may be individually replaced or rewired.
• UL listed for direct mounting on low density ceilings and damp locations.
Dimensi ns
6' AND 8' CHANNEL
4" (102mm)
3-1/16" (78mm)
2" Dia. K.O.
with 7/8" Dia. K.O. S Hook
K.O. (8)
6-3/8" (162mm) 7/8" Dia.
K.O. (8)
24" (610mm) 6" (152mm)
4-5/8" (117mm)
72" (1829mm) or 96" (2438mm)
2' OR 3' CHANNEL
4' CHANNEL
SIDE VIEW
24" (610mm) or 36" (914mm)
4" (102mm) 6" (152mm)
4-5/8" (117mm)
4-1/8"
(105mm)
S Hook
K.O. (8)
S Hook
K.O. (8)
4-5/8" (117mm)
6" (152mm)
4" (102mm)
48" (1219mm)
4-1/8"
(105mm)
7/8" Dia.
K.O. (4)
2" Dia. K.O.
with 7/8" Dia. K.O.
5-7/8" (149mm)5-7/8" (149mm) 7/8" (22mm)
7/8" Dia. K.O. (4)
1-7/8"
(48mm)
1/2" Dia. K.O. (2)
1-1/8"
6-3/8" (162mm)
4-1/8"
(105mm)
3-3/4" (T12)
(95mm)
3-1/2" (T8)
(89mm)
1 LAMP
2 LAMP
3-3/4" (T12)
(95mm)
3-1/2" (T8)
(89mm)

Standard Strip Wide SW STRIP
Page 2 o 2 4-1/8" Wide X 1-7/8" Deep X 24", 36", 48", 72" or 96" Lenghts
1 or 2 Lamp, T8 or T12
Job Information Type:
For Factory Technical In ormation: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details o design, materials and inish.
www.lightolier.com © Philips Group Secti n 3A/F li H100-42 Rev. C
Ordering Inf rmati n
Explanation o Catalog Number. Example: SW4S232HPFUNVHI
PHOTOMETRY
Specificati ns
MATERIALS:Chassis parts-are die-formed heavy gauge cold rolled steel, 4-1/8"
channel width.
BALLAST COVER: Code gauge steel secured with quarter turn latch.
FINISH:Chassis exteri r-phosphate undercoating, baked white polyester enamel.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non-PCB. If K.O.
is within 3" of ballast, use wire suitable for at least 90 .
LABELS: I.B.E.W./UL and ULc Listed.
This product may have a mercury containing lamp.
Manage in accord with Disposal Laws. See: www.lamprecycle.org
Opti ns/Access ries
FUSING: Internal fast blow fusing: SUFFIX: A.
Internal slow blow fusing: SUFFIX: C.
ELECTRICAL WIRING OPTIONS: Consult factory.
STEM AND CANOPY SETS: Suspends fixture 6", 12", 18" or 24"
from surface. Order Catalog Number:ASC6 CSP (6"), ASC12 CSP
(12"), ASC18 CSP (18"), ASC24 CSP (24").
CANOPY SPACER: Suspends fixture 1-1/2" from surface. Order
Catalog Number: AC1 CSP.
GROUNDED CONVENIENCE OUTLET: 120 volt only. SUFFIX: CO.
4' WIRE GUARD (WHITE): Specify two for 96" fixtures. Catalog
Number: AWG3W CSP.
CHAIN HANGING KIT: Includes two 5' heavy duty link chains with
sturdy “V” hooks for fixture suspension. Catalog Number: AH5 CSP.
TWIST TEE: For exposed T-bar mounting,
1-7/8" deep channel. Catalog Number:NAH3 CSP.
HEAVY DUTY COUPLER: Catalog Number: NHDC-W CSP.
SLIDING HANGER: Catalog Number: NAHW CSP.
REFLECTORS: Order Catalog Number:
SYMMETRICAL: NSYMF24S CSP (24")
NSYMF36S CSP (36")
NSYMF48S CSP (48")
ASYMMETRICAL: NASYF24S CSP (24")
NASYF36S CSP (36")
NASYF48S CSP (48")
FIXTURE
LENGTH:
2=24"
3=36"
4=48"
6=72"
8=96"
NUMBER OF
LAMPS IN
WIDTH:
(By thers)
1=1 Lamp
2=2 Lamp
LAMP WATTS:
17=T8, 2' Length2
20=T12, 2' Length
25=T8, 3' Length2
30=T12, 3' Length
32=T8, 4' Length2
34=T12, 4' Length
BALLAST TYPE:
LPF=Low Power
Factor. For
T12 nly
HPF=High Power
Factor
VOLTAGE:
120,277 or UNV
UNV T8 ONLY
OPTIONS:
Add appropriate suffix to
catalog no., ie: (A)
SW
REPORT NO: G17009
CATALOG NO:
SW4S232HPF120SO
LAMP TYPE; F32 / T8
LUMENS PER LAMP: 2900
TOTAL EFFICIENCY: 97.3%
CIE TYPE: SEMI-DIRECT
SPACING CRITERIA: 1.58
SHIELDING ANGLE: 180
LER = FS - 80.5 Watts - 60.3 BF - 0.88
Comparative yearly lighting energy cost per 1000 lumens = $2.98
LAMP
CONFIGURATION:
S=Standard
T=3' or 4' Lamps
in Tandem
(For 6' or 8' units)
STANDARD STRIP
WIDE:
4-1/8" Wide Channel
STEM AND
CANOPY SET
ASC6 CSP (6")
CANOPY
SPACER
AC1 CSP
CHAIN
HANGING
KIT
AH5 CSP
SLIDING
HANGER
NAHW CSP
TWIST TEE
NAH3 CSP
HEAVY DUTY
COUPLING
NHDC-W CSP
coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)
RF 20 50 30
RC 80 80 30
RW 70 50 30 50 30 10 50 30 10
1 99 93 88 81 77 74 74 71 68
2 88 79 72 69 63 58 63 58 54
3 80 68 60 59 53 47 54 49 44
4 72 60 51 52 45 39 47 42 37
5 66 53 44 46 39 33 42 36 31
6 61 47 38 41 34 29 38 32 27
7 56 43 34 37 30 25 34 28 24
8 52 39 30 34 27 22 31 25 21
9 49 35 27 31 24 20 29 23 19
10 45 32 24 29 22 18 27 21 17
BALLAST TYPE:
Standard Electromagnetic
LPF Models T12 PL
<20THD <10THD
1-1 & 1-2 Lamp Elec. T8 SO* HI*
1-4 Lamp Elec. T8 O4* H4*
*Instant Start Standard
ther dimming options. Consult factory.
n 2 Light Tandem 6
' and 8' fixtures, 2-2 light ballasts will be used with SO or HI.
SYMMETRICAL ASYMMETRICAL