15 3/8" L X 10" W
7" L X 7" W OPENING
13/4"
83/4"
Depth
5
6
7
9
11
12
12
34
18 1/8"
13"
8"
8
10
5"
Ceiling Cutout: 8 3/16" L x 8 3/16" W
Ordering Information: PAR38 Series A
Cat. No. Lamp Ceiling Trim Aperture Finish
PA1P3810BL (1) 100W PAR38 Overlap Black with White Flange
PA1P3810WL (1) 100W PAR38 Overlap White with White Flange
PA1P3810BTL (1) 100W PAR38 Trimless Black
PA1P3810WTL (1) 100W PAR38 Trimless White
PA1P3810BL = (Flanged) Black/White
PA1P3810WL = (Flanged) White
PA1P3810BTL = (Trimless) Black
PA1P3810WTL = (Trimless) White
Calculite®ProSpec®Linear Downlight PA1P3810
Page 1 of 2 1 Light PAR38 Series A
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • ( 08) 679-8131 • Fax ( 08) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Thomas Group LLC (Lightolier Division) • B0711
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories. Easily installed and removed for lamping with a simple twisting
motion. Constructed of die-formed aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 30° (on width) and 40° (on
diagonal) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black.
7. Mounting Brac ets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL, and CSA requirements.
9. Lampholder: Porcelain medium based; nickel plated screw shell. Prewired
with #18 SF-1 leads to junction box.
10.Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
below.
11.Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
12.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
Electrical
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 12 AWG
90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 4 3/4" dia. series, filters, lenses, screens and louver. (2) max.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
