Linak Deskline DPG Series User manual

Page 1 of 76
LINAK.COM/DESKLINE
Desk Panels DPG and Desk ControlTM App
User manual

Page 7 of 76
Only for EU markets
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
Only for Non EU markets
Persons who do not have the necessary experience or knowledge of the product/
products must not use the product/products. Besides, persons with reduced physical,
sensory or mental abilities must not use the product/products, unless they are under
surveillance or they have been thoroughly instructed in the use of the apparatus by
a person who is responsible for the safety of these persons.
Moreover, children must be under surveillance to ensure that they do not play with
the product.
Misuse
Do not overload the actuators – this can cause danger of personal injury and
damage to the system.
Do not use the actuator system for lifting persons. Do not sit or stand on a table
while operating – risk of personal injury.
Do not use the system in environments other than the intended indoor use.

Page 20 of 76
DPG1M
The DPG1M has three operation buttons.
Figure 7: DPG1M operation buttons
Symbol Description Function
Reminder Setting reminders
Bluetooth®Connecting the Desk ControlTM App via Bluetooth®wireless technology
Favourite Saving favourite positions
Each button has a specific function:
Operate the desk panel by tilting it.
1. Tilt and hold up DPG1M to drive desk up, press and hold down DPG1M to drive desk down.
2. Release DPG1M when you have reached your requested position.
Desk height limits
In case the desk cannot be operated in its entire span (e.g. a shelf is blocking the upwards movement or a
filing cabinet is placed under the desk and blocking the downwards movement), it is possible to set an upper
limit and a lower limit for the desk height.
Setting upper limit
1. Adjust desk to maximum allowable height.
2. Press and tilt DPG1M up at the same time until light flashes.
3. Release and DPG1M.
Setting lower limit
1. Adjust desk to minimum allowable height.
2. Press and press DPG1M down at the same time until light flashes.
3. Release and DPG1M.
Figure 8: Tilt and hold the DPG1M to drive the desk up Figure 9: Press and hold the DPG1M to drive the desk down

Page 21 of 76
The LED flashes white two times to indicate that saving the position is in progress. Not until the LED becomes
static white, has the position been saved.
If the user adjusts the desk to another position and saves this position, it will overwrite the favourite position
closest to the current position.
Favourite positions
Saving favourite positions
1. Adjust desk to a preferred position.
2. Press button for two seconds.
Figure 10: Saving favourite positions

Page 22 of 76
Driving to favourite positions
After saving the favourite positions, the user can reach the positions simply by tilting/pressing the DPG1M.
1. Tilt/press and hold - when a saved position has been reached, the desk stops.
2. Release DPG1M within one second.
This way the user can easily change between sitting and standing height without looking at the DPG1M in the
meantime.
When the desk stops at a favourite position, the user can
• continue to tilt/press the DPG1M for one second
or
• release the DPG1M and immediately tilt/press it again.
The desk will move past the favourite position and continue its movement.
Automatic driving to favourite positions
(only possible for “Full version” with “Automatic drive” enabled in the app)
1. Double-tap DPG1M to let desk adjust automatically to first position in direction of double-tap.
2. Simply tap DPG1M once to stop driving of desk between two favourite positions.
Figure 11: Tilt/press to drive desk
Figure 12: Double-tap to automatically adjust the desk to a favourite position

Page 23 of 76
Erasing favourite
1. Press the button for eight seconds to erase all saved favourite positions.
The LED flashes red when all the favourite positions are erased.
2. Press button in the middle for two seconds to enable pairing mode.
The LED flashes blue while the desk panel is in pairing mode.
Figure 13: Erase favourite positions
Bluetooth®
Connecting Bluetooth®
1. Download Desk Control™ App suited for your device in App store or Google Play.
Search for Desk Control and look for the app icon:
Figure 14: Connect Bluetooth®

Page 24 of 76
Reminder
The reminder LED is placed in the lower left corner of the DPG1M. The LED is intended to indicate the position of
the desk (sitting or standing height). The indication depends on the reminder interval chosen.
While the user is sitting for an appropriate amount of time according to the set interval, the LED calmly pulsates
green. When the sitting interval runs out, the calm pulsating green turns into fast pulsating orange for one
minute hereafter into static orange to indicate that the user should adjust the desk to standing height. In
standing height, the LED pulsates green until a potential timeout. When the desk is adjusted back to sitting
height, the LED pulsates green until the reminder goes off again.
Reminder restart
The reminder automatically restarts when the desk is lowered to sitting height.
Reminder timeout
After four hours without any action, the LED will time out. When the DPG1M is tilted, the green light turns back
on.
When the LED is enabled for reminders, the DPG1M is no longer in ZERO™ mode as long as the light is
on/active.
Figure 15: Pulsating green LED indicates no need to
drive desk up
Figure 16: Pulsating orange LED indicates that the user needs
to drive his/her desk up

Page 25 of 76
Reminder intervals
The LED lights up in three different intensities each representing an interval. The three standard intervals are:
- Interval 1: Reminder after 55 minutes sitting
- Interval 2: Reminder after 50 minutes sitting
- Interval 3: Reminder after 45 minutes sitting
The default interval is reminding after 55 minutes, which means the LED lights up in the weakest intensity.
Adjusting the reminder interval
1. Press button to adjust interval of getting reminded to change position.
2. Toggle through intervals by pressing button.
When the LED is not lit, the reminder is turned off.
Through the app, it is possible to personalise the three intervals to custom values.
Resetting the reminder
1. Press symbol for eight seconds to reset reminder to default values.
The LED flashes red when the reminder is reset.
Setting reminder interval Reminder off
Figure 17: Set the reminder
Figure 18: Reset reminder

Page 26 of 76
Key lock
The operation of the DPG1M can be locked to prevent unintended driving of the desk. As default the key lock is
disabled. If enabled, it automatically locks the DPG1M after a configured amount of time. The key lock function
can also be configured to indicate attempt to operate the locked DPG1M by showing a red light.
Unlocking DPG1M
1. Press , and in sequence (max. one second between each button press).