CUSTOMER ASSISTANCE POLICY
The business of The incoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask incoln Electric for advice or information about their use of our products. We respond to our customers based
on the best information in our possession at that time. incoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or
advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of
practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or
advice create, expand or alter any warranty with respect to the sale of our products.
incoln Electric is a responsible manufacturer, but the selection and use of specific products sold by incoln Electric is solely within the control of, and remains the sole responsibility of the
customer. Many variables beyond the control of incoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
A CLOSER LOOK
FEATURES
XTRACTOR 500FG S oke Extraction Gun
2
2.1
120
12
100
1
10
70
60
80
90
62
1.1
46
48 58
61
45
49 52
50
57
11
45
48
565553
51 4847
44 59
54
200
Optional Plug for Power Mig.
ITEM NO. DESCRIPTION PART NUMBER
1 Gooseneck 500FG S26369-38
1.1 Outer Tube, all FG Models S26369-1
2 Tapered Fume Shroud, 340, 500FG S26369-2
2.1 Fume Shroud Clip S26369-42
10 Handle pair, all FG Models S26369-4
11 Trigger Black all FG Models S26369-45
N/S Micro-Switch, all FG Models S26369-5
12 Handle Screw M3.5x9.5, all FG Models S26369-6
44 Connector Female Spade Trigger, all FG Models S26369-9
45 Clamp Hose 8.7mm Stepless, 500FG S26369-25
46 Connector Male Trigger, all FG Models S26369-10
47 Power Cable, 500FG S26369-22
48 Hose Water Blue 5x8mm S26369-23
49 Hose Gas 4.9x7mm S26369-26
50 Conduit 15’, 500FG S26369-40
51 Wire 2 Conductor Block, 500FG S26369-24
52 Cable Support, all FG Models S26369-12
53 Outer Plastic Cover, 500FG 15' S26369-30
54 Male Water Fitting, 500FG S26369-27
55 Support Rear Tree, all FG Models S26369-32
56 Support Rear CP , all FG Models S26369-14
58 Hose Water Red 5x8mm - Bulk, 500FG S26369-29
ITEM NO. DESCRIPTION PART NUMBER
57 Screw M4x6, all FG Models S26369-15
59 Block Adapter Tweco, 500FG S26369-18
60 Insulating Disk, 500FG S26369-19
61 Plug Amphenol incoln 2/Pin Male S26369-16
62 Trigger ead MR/ N for FG Guns S26369-41
*
70 Diffuser, 500FG S26370-3
*
80 Tip Holder M8 25mm, 500FG S26371-3
90 Contact Tip .035" M8 CU 262 (10x30mm) S22645-351
*
90 Contact Tip .045" M8 CU 262 (10x30mm) S22645-352
90 Contact Tip .052" M8 CU 262 (10x30mm) S22645-353
90 Contact Tip .062" M8 CU 262 (10x30mm) S22645-354
90 Contact Tip .035" M8 CZ 262 (10x30mm) S22645-55
90 Contact Tip .045" M8 CZ 262 (10x30mm) S22645-95
90 Contact Tip .052" M8 CZ 262 (10x30mm) S22645-54
90 Contact Tip .062" M8 CZ 262 (10x30mm) S22645-9
*
100 Nozzle Gas 14mm ID, 500FG S26372-9
100 Nozzle Gas 16mm ID, 500FG S26372-8
100 Nozzle Gas 20mm ID, 500FG S26372-7
*
120 iner Steel .035"-.045" 17' 500FG S26373-2
120 iner Steel .052"-.062" 17' 500FG S26373-3
200 Contact Tip Wrench, 500FG S26369-34
N/S eather Cover, all FG Models S26369-35
N/S = Not Shown.
*
Standard Set-up.
