LINET SELLA User manual

Multifunctional Chair SELLA
UN-PACKING MANUAL
INSTRUCTION MANUAL
D9U004SLA-0101
Version: 02
Publication Date: 2022-07

D9U004SLA-0101 2/49
MANUFACTURER:
BORCAD Medical a.s.
Fryčovice 673
739 45 Fryčovice
Czech Republic
Tel : [phone]
[email protected]
www.borcadmedical.com
Multifunctional Chair SELLA
Author: BORCAD Medical a.s.
Related links: http://www.linet.com/cs/borcad-medical
All rights reserved. All trademarks and brands are the property of the appropriate owners. The
manufacturer reserves the right to changes in the contents of this manual that relate to the product´s
technical regulations. It is for this reason that the contents of this manual may indicate differences from the
current manufacture of the product.

3/49 D9U004SLA-0101
Content
Introduction ...................................................................................................... 5
1 Un-packing manual ..................................................................................... 10
2 Overview of the basic parts........................................................................ 18
2.1 Overview of the basic product versions ............................................................................ 19
3 General instructions ................................................................................... 21
3.1 Standards.......................................................................................................................... 21
3.2 General information’s........................................................................................................ 21
3.3 General safety................................................................................................................... 21
4 Intended use................................................................................................ 23
4.1 User population................................................................................................................. 23
4.2 Contraindications .............................................................................................................. 23
4.3 Operator............................................................................................................................ 23
5 Setting the chair.......................................................................................... 24
5.1 Basic positions of the chair ............................................................................................... 25
6 Operating the chair ..................................................................................... 25
6.1 Moving and braking........................................................................................................... 26
6.2 Lifting and lowering........................................................................................................... 28
6.3 Positioning the bed............................................................................................................ 29
6.4 Adjusting the multifunctional armrests .............................................................................. 30
6.5 Height adjustment of the headrest.................................................................................... 31
6.6 Safety step ........................................................................................................................ 31
6.7 Help with getting on/off ..................................................................................................... 32
6.8 Hook.................................................................................................................................. 33
7 Accessories................................................................................................. 34
7.1 SLA-ZP-037 Armrests standard (pair) .............................................................................. 34
7.2 SLA-ZP-038 Armrests for blood donation (pair) ............................................................... 34
7.3 SLA-ZP-001 Table ............................................................................................................ 35
7.4 SLA-ZP-024 Table with safety barrier............................................................................... 35
7.5 SLA-ZP-023 Table safety lock .......................................................................................... 36
7.6 SLA-ZP-020 Table holder ................................................................................................. 37
7.7 SLA-ZP-005-X Stacking pocket ........................................................................................ 37
7.8 SLA-ZP-102 Holder of infusion stand ............................................................................... 38
7.9 SLA-ZP-003 Telescopic Infusion stand............................................................................. 38
7.10 SLA-ZP-011.10-X Side support (pair)............................................................................. 39
7.11 SLA-ZP-010-X Headrest, big .......................................................................................... 39
7.12 SLA-ZP-013-X Prolonged stripe for headrest................................................................. 39
7.13 SLA-ZP-019 Urine bag holder......................................................................................... 40
7.14 SLA-ZP-119 Urine bag holder......................................................................................... 40
7.15 SLA-ZP-018 Independent adjustment of backrest.......................................................... 40
7.16 SLA-ZP-006 Independent adjustment of legrest............................................................. 41
7.17 SLA-ZP-043 Oxygen bottle holder with box, SLA-103 Oxygen bottle holder................. 42
7.18 SLA-ZP-044-X Patient’s belt........................................................................................... 42
8 Care .............................................................................................................. 43
8.1 Cleaning and Disinfection ................................................................................................. 43

D9U004SLA-0101 4/49
9 Maintenance................................................................................................. 44
9.1 Technical specification...................................................................................................... 45
9.2 Transportation, storage and operation conditions ............................................................ 46
9.4 Service repairs .................................................................................................................. 47
9.5 Environmental protection and disposal of the product...................................................... 48

5/49 D9U004SLA-0101
Introduction
Please read carefully this complete instruction manual which was designed to
familiarize you with its correct use and with the parameters of your new reclining
relax chair. Please always follow the instructions of this manual and use the
chair always only in accordance with these instructions.
Please keep these instructions always near the chair throughout its operation
course. Every person operating the chair must read and understand the
contents of these instructions.
Very important information is marked throughout the manual by the following
symbols:
Logo
Meaning
EU legislation compliant product
Quality management systems certification authority
marking
Quality management systems certification authority
marking

D9U004SLA-0101 6/49
Pictogram
Meaning
Warning
Warning:
Dangerous electric voltage
This symbol introduces any information, that may help
you to avoid operative problems
B type accessory part
Production number
int x/y
Marking of intermittent operation, i.e. if the product has
been continuously operated for time period “x”, then it
must rest idle for time period “y”. For example int 10 / 20
means that after 10 minutes of continuous use
/positioning the product must be out of use/not positioned
for 20 minutes
IP X #
Constructional protection against water leakage,
dangerous touch contact and intrusion of foreign objects
Safe operational load
Safe patient load
Producer
Date of production

7/49 D9U004SLA-0101
Pictogram
Meaning
Follow the instructions manual.
Equipotentiality
Packaging material:
“Keep dry”
Packaging material:
“Fragile!“
Packaging material:
“This side up”
Temperature limitation
Transportation marking:
„Relative air humidity“.
Transportation marking:
“Air pressure”.
Marking according to the directive EC 2002/96/EC
(Directive about the disposal of old electric and electronic
appliances).
Symbol for: “Do not dispose of the product into communal
waste. Use special collection points for old electronic
appliances.“
MEDICAL DEVICE
(compatible with Medical Device Regulation)
UNIQUE DEVICE IDENTIFIER

D9U004SLA-0101 8/49
Abbreviation
Meaning
REF
Catalogue number
ME
Medical
LED
Light emitting diodes
VA
Power intake units
VGA
Computer standard for computer imaging technology
USB
Universal serial bus
LCD
Liquid crystal display
IT
Information technology
PC
Personal computer
dB
Sound intensity unit
hPa
Pressure unit
ČSN
Protected marking of the Czech technical norms
Hz
Frequency unit in the SI system

9/49 D9U004SLA-0101
Production label –explanation of symbols:
1
Address of Manufacturer
2
Type of product, serial number
3
Manufacturing Date (Year-Month-Day)
4
DI (Device Identifier)/ GTIN (Global Trade Item Number)
5
PI (Product Identifier)
6
2D Bar Code (GS1 DataMatrix) DI+PI=UDI
7
1D Bar code GS1-128 (Serial number)
8
Symbols
Any potential queries please address to the authorized representative or directly
to the producer BORCAD Medical a.s.
4
5
6
3
2
7
8
1

D9U004SLA-0101 10/49
1 Un-packing manual
Cut the tapes and remove the upper cover.
Remove all boxes with accessories and the accessory equipment from the
bottom lid.

11/49 D9U004SLA-0101
Remove the equipment if it is a part of your order (Telescopic infusion stand,
Side support (pair).

D9U004SLA-0101 12/49
Pull out the chair from the bottom slots and move out of the bottom lid.
Unless the chair is completely assembled, you may not use the lever
for adjusting the backrest or the lever for adjusting the backrest
separately!
+

13/49 D9U004SLA-0101
Installation of gas spring (for SLA-IB version)
Put gas spring on the back section and remove protective plastic tube.
Put a rope on the control head (it helps, when you push the control hook).

D9U004SLA-0101 14/49
Remove the protective caps from the gas spring and draw bar.
Use the pins to connect the gas spring lug to the fork at the bottom part of the
backrest. Define dimensional clearances using plastic washers and secure the
pin with the enclosed lock rings.

15/49 D9U004SLA-0101
Scheme of the connection between the gas spring lug and the backrest lug
Similarly, connect the draw bar lug with the backrest fork situated on the other
side of the chair.
1x PE washer,
thickness 1
mm
1x PE washer,
thickness 2
mm
Gas spring
lug
1x PE washer,
thickness 1
mm
1x PE washer,
thickness 2
mm
Lock
ring
Lock
ring
Backrest
direction

D9U004SLA-0101 16/49
Undo the leatherine connection at the fork where the gas spring lug is fixed and
move the cable into correct position.
Cut the tape securing the gas spring head under the seat.
Correct cable
position
Leatherine
split

17/49 D9U004SLA-0101
Remove the seat part from the box with accessories and put the seat into the
chair frame. Pay attention to the seat orientation.
Connect the infusion rod holder to the chair if it is included.
First remove the infusion holder plug
Then screw the infusion holder to the pin of the right rear wheel and put the
plug back.
Front seat
edge
direction

D9U004SLA-0101 18/49
2 Overview of the basic parts
1
Back part
2
Seat
3
Footrest
4
Safety step
5
Control lever for function help with getting on /getting off
6
Plastic chassis cover
7
Front wheels 7a –small, 7b - large
8
Rear wheels
9
Headrest adjustable for height
10
Handle of the back part with a hook + Control lever for adjusting bearing
area
11
Multifunctional armrest
12
Armrest release lever
13
Lift pedal –only in models with lift
14
Central brake (if equipped)
2
12
4
3
1
10
7a
6
8
5
7b
13
1
4
11
9

19/49 D9U004SLA-0101
2.1 Overview of the basic product versions
SLA-AX
SLA-CX
SLA-DX
Fixed chassis with large
front wheels
Fixed chassis with front
turning wheels
Chassis with lift and
turning wheels
SLA-IX
SLA-JX
Chassis with lift and
front large wheels and
getting off aid
Chassis with lift and
front turning wheels and
getting off aid

D9U004SLA-0101 20/49
Color versions of cushioned parts (X)
Type
Color (X):
A
Apricot -orange
B
Baltic - blue
C
Crème
F
Schwarz - black
D3
Pastel orange