LINET Sprint 100 Parts list manual

User Manual and Technical
Description
Sprint 100
Universal Transport Stretcher
D9U001ES1-0110
Version: 02
Publication Date: 2018-09

D9U001ES1-0110_022
Manufacturer:
LINET spol. s r.o.
Želevčice 5
274 01 Slaný
Tel.: [phone]
Fax: [phone]
E-mail: [email protected]
http://www.linet.com
Sprint 100
Universal Transport Stretcher
Author: LINET, s.r.o.
Related links: www.linet.com
D9U001ES1-0110
Version: 02
Publication Date: 2018-09
Copyright © LINET, s.r.o., 2018
Translation © LINET, 2018
All rights reserved.
All trademarks and brands are the property of the appropriate owners. The manufacturer reserves the right to changes in the
contents of this manual that relate to the product´s technical regulations. It is for this reason that the contents of this manual may
indicate differences from the current manufacture of the product. Reproduction, also excerpts, only with prior permission of the
publisher. Subject to changes due to technical developments. All technical data are rated data and are subject to construction and
manufacturing tolerances.

D9U001ES1-0110_02 3
1 Symbols and Denitions .............................................4
1.1 Warning Notices..........................................................4
1.1.1Types of Warning Notices ........................................4
1.1.2 Structure of Warning Notices ................................... 4
1.2 Instructions..................................................................4
1.3 Lists.............................................................................4
1.4 Symbols on the Bed....................................................5
1.5 Symbols on the Mattress ............................................7
1.6 Serial Label with UDI ..................................................9
1.7 Denitions ...................................................................10
1.8 Abbreviations ..............................................................10
2 Safety Instructions.......................................................11
3 Intended Use ................................................................12
4 Product Description.....................................................13
5 Technical Specication ...............................................15
5.1 Identication of Applied Parts (Type B) .......................15
5.2 Mechanical Specications ..........................................15
5.3 Environment Conditions (Sprint 100) .......................... 16
6 Use and Storage Conditions.......................................16
7 Scope of Delivery and Bed Variants...........................17
7.1 Delivery .......................................................................17
7.2 Scope of Delivery........................................................17
7.3 Sprint 100 Variants......................................................17
8 Putting into Service .....................................................18
8.1 Mattress Support Platform ..........................................19
8.2 Potential Interconnection (optional) ............................20
8.3 Before Use .................................................................. 20
8.4Transport.....................................................................20
9 Manipulation .................................................................22
9.1 Collapsible Siderails....................................................23
9.2 Castor Control.............................................................24
9.2.1 Braked Bed ..............................................................25
9.2.2 Forward Movement (Steering) .................................25
9.2.3 Unrestricted Movement............................................26
9.3 Bed Positioning ........................................................... 27
9.3.1 Backrest ................................................................... 27
9.3.2 Thighrest (only for 4-part Mattress Support Platform)
..........................................................................................28
9.3.3 Calfrest (only for 4-part Mattress Support Platform) 29
9.3.4 Lifting ......................................................................30
9.3.5 Lowering .................................................................31
9.3.6 Trendelenburg Position ............................................ 32
9.3.7Anti-Trendelenburg Tilt .............................................33
9.3.8 Cardiac Chair Position .............................................34
9.4 CPR Backrest Release ...............................................35
9.4.1 The 2-part Mattress Support Platform......................35
9.4.2 The 4-part Mattress Support Platform......................35
10 Equipment ..................................................................36
10.1 Accessory Holders (optional) ....................................36
10.2 Undercarriage Cover.................................................36
10.3 Sprung Retractable Fifth Castor (optional) ...............37
10.4 Angle Indicators (optional) ........................................37
10.5 Examination with C-arm (in-bed uoroscopy) ........... 38
11 Mattress ......................................................................40
11.1 Intended Use .............................................................40
11.1.1Anti-slip coating ......................................................40
11.2 Installation of Passive Mattress.................................40
11.3 Mattresses Specications.......................................... 41
11.4 Cleaning of Passive Mattress....................................42
11.4.1 General Guidance ..................................................42
11.4.2 Routine Cleaning and Disinfection .........................43
11.4.3 Complete Cleaning and Disinfection ......................43
11.4.4 Mattress Core.........................................................43
12Accessories ................................................................44
12.1Accessory Rail with plastic hooks ............................. 44
12.2 DIN Rail.....................................................................45
12.3 Foldable Infusion Stands ..........................................46
12.4 Infusion Stand ........................................................... 47
12.5 Monitor Shelf.............................................................48
12.6 Handles.....................................................................49
12.7 Chart Holder..............................................................49
12.8 Paper Sheet Holder ..................................................50
12.9 Storage Space ..........................................................50
12.10 Oxygen Bottle Holder..............................................51
13 Cleaning/Disinfection ................................................53
13.1 Cleaning (Sprint 100) ................................................53
13.1.1 Daily Cleaning........................................................54
13.1.2 Cleaning before Changing Patients .......................54
13.1.3 Complete Cleaning and Disinfection......................54
14 Troubleshooting .........................................................55
15 Maintenance ...............................................................56
15.1 Monthly maintenance................................................56
15.2 Maintenance every 3 months....................................56
15.3 Maintenance every 12 months..................................56
15.3.1 Spare Parts ............................................................56
15.3.2 Completeness ........................................................56
15.3.3 Wear.......................................................................56
15.3.4 Functioning ............................................................56
15.4 Safety Checks...........................................................57
15.5 Linet ® Service Department.......................................57
16 Disposal ...................................................................... 58
16.1 Environment Protection.............................................58
16.2 Disposal ....................................................................58
16.2.1 Sprint 100...............................................................58
17 Warranty......................................................................59
18 Standards and Regulations ......................................60
18.1 Sprint 100..................................................................60
18.2 Manufacturer.............................................................60
Table of contents

D9U001ES1-0110_024
1 Symbols and Denitions
1.1 Warning Notices
1.1.1 Types of Warning Notices
Warning notices are differentiated by the type of danger using the following key words:
► CAUTION warns about the risk of material damage.
► WARNING warns about the risk of physical injury.
► DANGER warns about the risk of fatal injury.
1.1.2 Structure of Warning Notices
SIGNAL WORDS!
Type and source of danger!
► Measures to avoid the danger.
1.2 Instructions
Structure of instructions:
► Perform this step.
Results, if necessary.
1.3 Lists
Structure of bulleted lists:
■ List level 1
□ List level 2
● List level 3

D9U001ES1-0110_02 5
1.4 Symbols on the Bed
READ INSTRUCTIONS FOR USE
SAFE WORKING LOAD
WARNING AGAINST CRUSHING OR TRAPPING
JACK FOR ATTACHMENT OF CONDUCTOR FOR POTENTIAL
EQUALISATION
POSSIBLE RISK
APPLIED PARTS TYPE B
ONLY SUITABLE FOR INDOOR USE
MAXIMUM WEIGHT OF PATIENT
WEIGHT OF BED
MET MARK
RECYCLING SYMBOLS

D9U001ES1-0110_026
PLACE MONITOR ON THIS SIDE OF THE MONITOR SHELF
DO NOT PLACE MONITOR ON THIS SIDE OF THE MONITOR SHELF
INSTRUCTION FOR PLACEMENT OF THE MONITOR SHELF
(L=LEFT, R=RIGHT)
FOLD THE MARKED FOLDABLE INFUSION STAND AS THE FIRST ONE
FOLD THE MARKED FOLDABLE INFUSION STAND AS THE SECOND ONE
MANUFACTURER
MANUFACTURING DATE
REFERENCE NUMBER
(PRODUCT TYPE DEPENDING ON CONFIGURATION)
SERIAL NUMBER

D9U001ES1-0110_02 7
READ INSTRUCTIONS FOR USE
CE MARKING
COVER MATERIALS ARE FIRE RESISTANT
TO BS7175, SOURCE 0, 1 AND 5
DO NOT IRON
DO NOT USE PHENOL
DO NOT WRING
REGULARLY INSPECT THE INSIDE OF THE COVER FOR CONTAMINATION
NO MACHINE WASH
DISINFECT USING SOLUTION CONTAINING LESS THAN 1000 ppm OF
CHLORINE (REFER TO INSTRUCTIONS FOR USE)
RINSE WITH WATER
DRY
1.5 Symbols on the Mattress

D9U001ES1-0110_028
MATTRESS FOOT PART

D9U001ES1-0110_02 9
1.6 Serial Label with UDI
There is a serial label of the bed under the Backrest.
Fig. Serial Label with UDI (Sprint 100)
Address of Distributor
Symbols Serial Number PI (Product Identier)
1D Bar Code GS1-128
(Serial Number)
Manufacturing Date
(Year-Month-Day)
DI (Device Identier)
/ GTIN (Global Trade
Item Number)
2D Bar Code
(GS1 Data Matrix)
DI + PI = UDI
Fig. Mattress Label
(Sprint Standard)
Fig. Mattress Label
(Sprint Comfort)
Fig. Mattress Label
(Sprint Advanced)
Fig. Position of serial label on the bed

D9U001ES1-0110_0210
1.7 Denitions
Basic Bed Conguration the pricelist model conguration, not including a mattress
Bed Weight The value depends on the product conguration, accessories or
customer adjustments.
Clearance of Undercarriage the height from the oor to the lowest point of the undercarriage
between the castors, for the manipulation of accessories under a
braked bed in the standard position
Reference number Reference number depends on conguration.
Safe Working Load the highest allowable load on the bed (patient, mattress, accesso-
ries and the load supported by those accessories)
Siderail Height the height of the upper crossbar or the edges of the siderails (not
the highest point of the siderail controls) from the patient surface
Standard Bed Position - The height of the mattress support platform with regard to the
oor is 56,5 cm (2-part Mattress Support Platform) or 55,5 cm (4-
part Mattress Support Platform)
- The Mattress Support Platform, including the individual parts, has
to be in a horizontal (level - 0°) position.
- The siderails are always locked in the upper position.
1.8 Abbreviations
CE Normatively harmonized product for European Economic Area
CPR Cardiopulmonary Resuscitation
ICU Intensive Care Unit
IV Intravenous
MET MET Laboratories testing and certifying for the U.S. market
ppm parts per million, millionth (1000 ppm = 0,1%)
REF Reference number (product type depending on conguration)
SN Serial number
SWL Safe Working Load
UDI Unique Device Identication (for medical devices)

D9U001ES1-0110_02 11
2 Safety Instructions
► Follow the instructions carefully.
► Use the bed exclusively if it is in perfect working order.
► If necessary, check the bed functions daily or at each shift change.
► Ensure any user has read and understood this manual completely before operating the product.
► Ensure that the bed is operated exclusively by qualied personnel.
► Ensure that the patient (health permitting) has been informed about the operation of the bed and all applicable safety
instructions.
► Move the bed exclusively on even, hard-surfaced oors.
► Replace any damaged parts immediately with original spare parts.
► Ensure that maintenance and installation are performed exclusively by qualied personnel who have been trained by the
manufacturer.
► Before peak loads or unavoidable excess loads (CPR), place Mattress Support Platform in the lowest position.
► Ensure that only one adult patient uses the bed at any time.
► Take care to avoid injuries or squeezing when operating moving parts.
► When using lifting poles or infusion stands, ensure that nothing will be damaged when you move or adjust the bed.
► Brake the castors when the bed is occupied.
► Keep the Mattress Support Platform in the lowest position at any time when the healthcare personnel are not treating the
patient in order to prevent the patient from falling or injuries.
► Ensure that Siderails are operated exclusively by healthcare personnel.
► Never use the bed in areas where there is a hazard of explosion.
► Ensure that parts of the bed intended for movement are not blocked.
► To prevent failures, use exclusively the manufacturer’s original accessories and mattresses.
► Ensure that the stipulated safe working load is not exceeded.
► If the patient‘s condition could lead to an entrapment, leave the mattress support platform in the at position whilst
unattended.
► Adjust bed height when transporting the bed in order to facilitate overcoming possible obstacles.
► Do not modify bed and its components without the manufacturer´s approval.
► Use the mattress system exclusively as specied in this manual and in perfect working order.
► Use the mattress system exclusively in its original state and do not modify it in any way.
► Have the mattress system used exclusively by or under supervision of trained and qualied nursing personnel.
► Have the mattress system serviced and installed exclusively by qualied personnel trained and authorised by the
manufacturer.
► Do not exceed the maximum patient weight limit (see Mechanical Specications).
► Do not use the bed in the case its parts have been removed unless these parts are designed to be removed.
► To avoid injury or crushing, take extra caution when operating any moving parts of the bed.
► When using infusion stands, ensure that nothing will be damaged when you move or adjust the bed.

D9U001ES1-0110_0212
3 Intended Use
Sprint 100 is a universal mechanical transport bed intended for urgent care and acute admission. Its purpose is to support
patient´s body during his transport in critical condition. At the same time Sprint 100 is intended for basic examination of the
transported patient. Sprint 100 is not intended for serving as standard hospital bed.
Sprint 100 must be used exclusively by or under supervision of trained and qualied nursing personnel.
Sprint 100 is suitable for:
■Patients
□ Standard bed:
● With weight ≥ 40 kg
● With height ≥ 146 cm
● With BMI ≥ 17
□ Whose weight (including mattress and accessories) does not exceed the SWL
■Personnel
□ qualied medical staff
□ patient (condition permitting)
■Use
□ emergency department (indoor use)
□patient transport
■Transport
□in original bag
■Medical purpose
□support for patients in Sprint 100 bed
NOTE For information concerning uses other than those, please contact LINET ®.

D9U001ES1-0110_02 13
4 Product Description
SPRINT 100 WITH 4-PART MATTRESS SUPPORT PLATFORM
1. Mattress Support Platform
2. Collapsible Siderail
3. Thighrest Handle
4. Bushings for Accessories
5. Corner Bumper
6. Brake Pedal
7. Siderail Release Mechanism
8. Thighrest Control
9. Drive Pedal and Brake Pedal (optional)
10. Foot End Lowering Pedal
11. Head End Lowering Pedal
12. Lifting Pedal
13. Space for Accessories or for means of xing patient
14. Castor
15. Siderail Release Mechanism (optional)
16. Backrest Release Handle
Fig. Bed Overview (Sprint 100 with 4-part Mattress Support Platform)
5
1213 11 10 96
7
8
14
2 3 41
15
16

D9U001ES1-0110_0214
SPRINT 100 WITH 2-PART MATTRESS SUPPORT PLATFORM
1. Mattress Support Platform
2. Collapsible Siderail
3. Bushings for Accessories
4. Corner Bumper
5. Brake Pedal
6. Siderail Release Mechanism
7. Drive Pedal and Brake Pedal (optional)
8. Foot End Lowering Pedal
9. Head End Lowering Pedal
10. Lifting Pedal
11. Space for Accessories or for means of xing patient
12. Castor
13. Siderail Release Mechanism (optional)
14. Backrest Release Handle
Fig. Bed Overview (Sprint 100 with 2-part Mattress Support Platform)
4
1011 9875
6
12
2 31
13
14

D9U001ES1-0110_02 15
5 Technical Specication
All technical data are rated data and are subject to construction and manufacturing tolerances.
5.1 Identication of Applied Parts (Type B)
All part of the bed (and accessories) the patient can reach are type B Applied Parts.
■ Mattress Support Platform Frame, Parts of Mattress Support Platform
■Siderails
■ Bed Ends
■ Mattress
5.2 Mechanical Specications
SPRINT 100 WITH 4-PART MATTRESS SUPPORT PLATFORM
Parameter Value
External Dimensions in Standard Bed Position (length x width) 211 cm x 76 cm
Siderail Height above Mattress Support Platform 4 cm (minimum), 36,5 cm (maximum)
Siderail Length 125 cm
Distance between siderail bars 21 cm
Mattress dimensions (length x width) 193 cm x 66 cm
Maximum Mattress Height 13 cm
Castor diameter 20 cm
Minimum-Maximum Mattress Support Platform Height above
oor (without Mattress)
55,5 cm - 88 cm
Maximum Backrest Angle 90°
Maximum Thighrest Angle 40°
Maximum Calfrest Angle 22°
Trendelenburg/Anti-Trendelenburg Position (Angle) +18°/-18°
Bed Weight 120 Kg
SWL (Bed Safe Working Load) 320 Kg
Maximum Patient Weight 280 Kg

D9U001ES1-0110_0216
SPRINT 100 WITH 2-PART MATTRESS SUPPORT PLATFORM
Parameter Value
External Dimensions in Standard Bed Position (length x width) 211 cm x 76 cm
Siderail Height above Mattress Support Platform 4 cm (minimum), 36,5 cm (maximum)
Siderail Length 125 cm
Distance between siderail bars 21 cm
Mattress dimensions (length x width) 193 cm x 66 cm
Maximum Mattress Height 13 cm
Castor diameter 20 cm
Minimum-Maximum Mattress Support Platform Height above
oor (without Mattress)
56,5 cm - 89 cm
Maximum Backrest Angle 90°
Trendelenburg/Anti-Trendelenburg Position (Angle) +18°/-18°
Bed Weight 120 Kg
SWL (Bed Safe Working Load) 320 Kg
Maximum Patient Weight 280 Kg
5.3 Environment Conditions (Sprint 100)
Parameter Value
Use Conditions
Ambient Temperature 10°C-40°C
Relative Humidity 30% - 75 %
Atmospheric Pressure 795 - 1060 hPa
Storage and Transport Conditions
Ambient Temperature -20°C- 50°C
Relative Humidity 20% - 90 %
Atmospheric Pressure 795 - 1060 hPa
6 Use and Storage Conditions
Sprint 100 is not suitable for indoor environments containing ammable gases (except oxygen cylinders).

D9U001ES1-0110_02 17
7 Scope of Delivery and Bed Variants
7.1 Delivery
► Upon receipt, check that the shipment is complete as specied on the delivery note.
► Notify the carrier and supplier of any deciencies or damages immediately as well as in writing or make a note on the
delivery note.
7.2 Scope of Delivery
■ Sprint 100 Universal Transport Stretcher
■ User Manual
7.3 Sprint 100 Variants
Basic Conguration:
■ 2-part Mattress Support Platform
■4x Tente 200 mm castors
□directional castor on head end
□ directional castor on foot end
■Brakes from Head End and from Foot End
■ Undercarriage Cover
■Siderails
■ Foot Siderail Release Mechanism
Optional bed features:
■ Mattress Support Platform
□ 4-part Mattress Support Platform
□ Fifth Castor
□ Head and Foot Siderail Release Mechanism
□ X-Ray cassette holder (Mattress Support Platform with 2 sections)
□ X-Ray cassette holder (Mattress Support Platform with 4 sections)
□ C-arm ready
■Siderails
□ Siderail shock absorber (Softdrop)
■Infusion stand and handles
□ 1x pair of foldable handles (Head End)
□ 1x pair of foldable handles (Foot End)
□ 1x pair of foldable infusion stand and handles (Head End or Foot End)
□ 1x pair of simple handles
■ Undercarriage
□ Brakes on side
■Accessory Holders
□ on side
□ on Head End
□ on Foot End
■Angle Indicators
□ Backrest and Seat section of Mattress Support Platform (on side)
□ Mattress Support Platform frame (on side in seat section)
■Potential Interconnection
□ with Potential Interconnection
□ without Potential Interconnection

D9U001ES1-0110_0218
8 Putting into Service
WARNING!
Risk of injury when working on the bed!
► Ensure that the castors are locked prior to assembly, disassembly and maintenance.
CAUTION!
Material damage due to incorrect assembly!
► Ensure that assembly is performed exclusively by manufacturer´s customer service or trained hospital personnel.
CAUTION!
Material damage due to incorrect use!
► Do not use pedals for lifting or lowering if the bed is not in horizontal position!
NOTE For safe, easy handling, Linet ® recommends having two technicians assemble the bed.
Set up the bed as follows:
► Unpack the bed.
► Check the delivery (see Scope of Delivery and Sprint 100 Variants).
► Ensure that all of the required mechanisms are available on site.
► Raise siderails up.
► Install accessories.
► Set up the bed exclusively on a suitable oor surface (see Transport).
HOOKS ON THE ACCESSORY RAIL (optional)
If the bed is equipped with accessory rail on the head end / foot end hooks on the accessory rail are delivered in the safety position.
In order to use the hooks remove them and place them on the accessory rail from the outer side (reversely).

D9U001ES1-0110_02 19
8.1 Mattress Support Platform
Sprint 100 has Mattress Support Platform with two sections or four sections.
2-PART MATTRESS SUPPORT PLATFORM
4-PART MATTRESS SUPPORT PLATFORM
LEFT SIDE
Fig. 4-part Mattress Support Platform
31 2 4
RIGHT SIDE
HEAD END
FOOT END
LEFT SIDE
Fig. 2-part Mattress Support Platform
1 2
RIGHT SIDE
HEAD END
FOOT END

D9U001ES1-0110_0220
8.2 Potential Interconnection (optional)
The bed is equipped with a standard protective connector. This connector is used for potential equalisation between the bed and
any intravascular or intracardiac device connected to the patient to protect the patient from static electric shocks.
Use equalisation connector if:
■ the patient is connected to any intravascular or intracardiac device.
Before connecting the patient to an intravascular/intracardiac device:
► Connect the ground wire of the device to the potential equalisation
connector on the bed on which the patient in question is lying.
► Use a standard hospital connector.
► Make sure that the connectors match.
► Make sure that there is no possibility for inadvertent disconnection.
Before moving the bed:
► Disconnect the patient from the intravascular or intracardiac device.
► Disconnect the potential equalisation connector.
8.3 Before Use
Prepare the bed for use as follows:
► Perform bleeding procedure of hydraulic units in the highest bed position by pressing lifting pedal 10 times.
► Raise the Mattress Support Platform to the highest position.
► Lower the Mattress Support Platform to the lowest position.
► Tilt the Mattress Support Platform to Trendelenburg position.
► Position the Mattress Support Platform to Anti-Trendelenburg tilt.
► Check that the castors as well as main brake work correctly.
► Check that the Siderails function properly.
► Dispose of all packaging (see „16 Disposal“ on the page 58).
8.4 Transport
For a safe transport, observe the following:
► Ensure that no cables are run over when moving a bed.
► Ensure that the castors are not braked before moving the bed.
► Adjust bed height to at least 20 cm below maximum height.
► Push bed by handles on Head End or Foot End.
► Move the bed exclusively on suitable oor surfaces.
► Ensure the bed is braked when it should not move.
Fig. Potential equalisation connector -
female
Fig. Potential equalisation - male (head end)