Linksys Small Business SPA2102 User manual

Linksys SPA2102 Setup and VoIP Configuration Guide
Before You Begin, make sure you ave t e following:
• An active Internet connection
• An active Internet p one service account and its settings
• A cable/DSL modem
• One computer for configuration of t e P one Adapter
• An analog telep one or fax mac ine wit an RJ-11 p one cable.
I. Connect the Phone Adapter
Figure 1
STEP 1 Power off your network devices, including your modem and PC.
STEP 2 Connect one end of an RJ-11 p one cable to t e P one Adapter’s PHONE 1 port. Connect
t e ot er end to your analog telep one or fax mac ine.
IMPORTANT: Do not connect the PHONE port to a telephone wall jack. Make sure you only connect a telephone or fax
machine to the PHONE port. Otherwise, the PhoneA apter or the telephone wiring in your home or office may be amage .
STEP 3 Repeat Step B wit t e PHONE 2 port if you ave an additional telep one or fax mac ine to
connect.
STEP 4 Connect one end of an Et ernet network cable (included) to t e ETHERNET port t e P one
Adapter as s own in Figure 2. Connect t e ot er end to t e Et ernet port of your PC.
Figure 2
STEP 5 Connect one end of a different Et ernet network cable to t e INTERNET port of t e P one
Adapter as s own in Figure 3. Connect t e ot er end to your cable/DSL modem.
Figure 3

STEP 6 Power on t e cable/DSL modem.
STEP 7 Connect t e included power adapter to t e P one Adapter’s power port as s own in Figure
4 and t en plug t e power adapter into an electrical outlet. T e power LED on t e front
panel will lig t up as soon as t e P one Adapter powers on.
Figure 4
NOTE: Make sure your PC’s Ethernet a apter is set to obtain an IP a ress automatically.
II. Configure the Phone Adapter
STEP 1 Launc t e web browser on t e PC.
STEP 2 Enter ttp://192.168.0.1/ advanced in t e Address field (192.168.0.1 is t e default local IP
address of t e P one Adapter). T en press t e Enter key.
STEP 3 Click on Admin Login and t e click on t e Router Tab. C oose t e Internet type in t e drop
down.
STEP 4 Next, c oose from t e main menu 'Voice' and t en Line1. Enter your Asiadigicall VOIP
number into t e User Id: field and Asiadigicall SIP password into t e Aut enticate Password: field.
Enter 221.133.209.9 into Registration/Proxy Server: field. Repeat Step 5 for line 2.
Example:
Proxy: 221.133.209.9
Display Name: Enter your full name, t is will s ow up as part of your callerid.
User ID: 61055001000
Password: 123456
Register Expires: 3600
STEP 5 Click on t e "Submit All C anges" button to save t e settings.
STEP 6 Make Calls!