Linksys WAP54GPE - Wireless-G Exterior Access Point Operation manual

High-Speed Wireless Access for Exterior Environments!
Wireless-G
Exterior Access Point Product Data
Model WAP54GPE
The Linksys Wireless-G Exterior Access Point lets you connect
Wireless-G (802.11g) or Wireless-B (802.11b) devices to your
wired network so you can add PCs to the network with no
cabling hassle. This weather-proof Access Point creates a
“wireless bubble” in exterior spaces, like patios, pool areas,
and outdoor cafés. Power over Ethernet support makes it easy
to install, and you can create multiple SSIDs that connect to
individual VLANs to keep your traffic separated.
It’s also perfect for use as a bridge, a kind of “cable-less cable”
to connect remote areas together. Maybe your warehouse is
in a separate building from your offices. Or maybe you need
to connect the separate buildings of a college campus. With
one Wireless-G Exterior Access Point on each building, you’re
connected up to 54Mbps – with no cable to run. The exterior-
rated case protects the access point, and contains an internal
antenna.
To protect your data and privacy, the Wireless-G Exterior Access
Point supports both Wired Equivalent Privacy (WEP) and the
industrial-strength wireless security of Wi-Fi Protected Access™
(WPA), encoding all your wireless transmissions with powerful
encryption. The MAC Address filter lets you decide exactly who
has access to your wireless network, and advanced logging
keeps you appraised. Configuration is a snap with the web
browser-based configuration utility.
The Linksys Wireless-G Exterior Access Point is the best way
to add wireless access to the outdoor areas of your home or
business.
Add high-speed Wireless-G
access to the exterior areas
of your wired home or small
business network
Data rates up to 54Mbps in
Wireless-G (802.11g) mode, or
11Mbps in Wireless-B (802.11b)
Weather-proof housing, internal
high-gain antenna, and Power-
over-Ethernet enable safe, simple,
exterior installations
Advanced security with WPA
encryption, logging, and MAC
address filtering
WIRELESS

Linksys
A Division of Cisco Systems, Inc.
121 Theory Drive
Irvine, CA 92617 USA
Web: http://www.linksys.com
E-mail: [email protected]
[email protected]
Linksys products are available in more than
50 countries, supported by 12 Linksys Regional
Offices throughout the world. For a complete
list of local Linksys Sales and Technical Support
contacts, visit our Worldwide Web Site at
www.linksys.com
Minimum Requirements Package Contents
802.11b or 802.11g Wireless Adapter with TCP/IP Protocol
Installed per PC
or
Network Adapter with Ethernet Network Cable and TCP/IP
protocol installed per PC
POE injector or Switch/Router with Power over Ethernet
(PoE) support
Web-based configuration: Java-enabled web browser
•
•
•
•
Wireless-G Exterior Access Point
User Guide on CD-ROM
Mounting Plate with Hardware
12’ Weather Resistant Network Cable
Registration Card
•
•
•
•
•
Wireless-G
Exterior Access Point
Features
NEMA rated, lightning protected, weather proof housing
Built-in 9dBi directional antenna
Supports 802.3af Power over Ethernet (PoE)
Security Features: 802.1x/RADIUS Authentication, Multiple SSID to
VLAN mapping for client isolation
Supports AP, Bridge Mode and Repeater mode.
Supports 802.11F wireless roaming
Specifications
Standards 802.11g, 802.11b, 802.3, 802.3u, 802.3af
(PoE), 802.1p (QoS priority), 802.1q (VLAN),
802.1x (Security Authentication),
802.11i (Security WPA2), 802.11F (IAPP)
Ports 1 Ethernet, 1 External Antenna (sold separately)
Buttons Reset
Cabling Type UTP CAT 5
LEDs Power, Ethernet, Wireless
System Flash 8 MB
System RAM 32 MB
Setup/Config
UPnP able/cert/no N/A
.Net support y/n N/A
Setup Wizard y/n n
Web UI y/n y
Static IP y/n y
DHCP client y/n y
Management
SNMP Version 1,2 and 2c
Event Logging y/n y
Web FW Upgrade y/n y
Diags: Flash, etc. Flash, RAM, LAN, WLAN
Wireless
Spec/Modulation 802.11b/DSSS, 11g/ODFM
Data Rates 11b: 1, 2, 5.5, 11 Mbps, 11g: 6, 9, 11, 12,
18, 24, 36, 48, 54 Mbps
Channels 11 North America, 13 Europe (ETSI and Japan)
Auto Channel Selection
•
•
•
•
•
•
Model WAP54GPE
Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or
registered trademarks of their respective holders.
WAP54GPEv1.1-DS-61026-NC-DF
# of Int. Ant. 1 (directional)
Ant. connector type Reverse Polarity Female N-type
Detachable y/n/na y (sold separately)
RF Pwr (EIRP) in dBm 11.g: Typical - 14dBm, 11.b: Typical - 18dBm
Antenna Gain in dBi Internal antenna: 9dBi
Adjustable power y
Receiver Sensitivity 11.g: 54Mbps@ -69dBm, 11.b: 11Mbps@ -82dBM
Security
802.1x Radius auth. y
Radius parameters MD5, SHA, TLS, TTLS, PEAP
Dynamic Keys y/n y
HTTPS to Web U.I. y
Access Ctrl List Type MAC address
MAC Filter y/n y
VPN Passthru types IPSec, L2TP, PPTP
VPN Endpoint types N/A
Wireless Security
WEP bits 64, 128
WPA bits & params 128 - TKIP/AES
WPA2 bits & params 256 - AES
SSID disable y
Multiple SSID y/n y
SSID-VLAN map y/n y
Client Isolation y/n y
Environmental
Device Dimensions
Metric 163 x 205 x 55 mm 1.14 kg
English 6.42” x 8.07” x 2.17” 2.51 lbs
Mounting Options Industrial-strength, weather-proof housing, NEMA
rating, lighting protection for outdoor enclosure,
ceiling or wall mountable
Power 48V DC
PoE in y/n y
PoE out y/n n
Certification CC, IC, UL2043,CE
Operating Temp. -4 to 140F, -20 to 60c
Storage Temp. - -4 to 140F, -20 to 60c
Operating Humidity 5% to 95% non-condsensing
Storage Humidity 5% to 95% non-condsensing