Lippert Plant 310 User manual

Whenever, wherever,
we make your experience better.
STRINGS ADJUSTMENT TENSION MANUAL
SIRIO 2.0
Plant 310
TI-433 CCD-0006442
Rev: 05.20.2022

INTRODUCTION
In the backside of the blind there are 4 adjustment plates.
The plates are used to adjust the wire tension of the fabric in the opposite side.
TI-433 CCD-0006442
Rev: 05.20.2022

Detect which fabric needs to be adjust.
Place its handle in closed position and hold it.
Slightly unscrew the screw in the opposite
side until the wire clamp plate is free to move.
Move the wire clamp plate as shown in the
picture to increase or decrease the string
tension.
TENSION ADJUSTMENT
Increase Decrease
LEFT RIGHT
Decrease Increase
LEFT RIGHT
Increase Decrease
LEFT RIGHT
Decrease Increase
LEFT RIGHT
TI-433 CCD-0006442
Rev: 05.20.2022

TENSION ADJUSTMENT
If the handle is moved
forward on the left, it
means that the tension
of the ropes on the left
side is too high.
Reduce the tension of
the ropes on the left
side.
If the handle is moved
forward on the right, it
means that the tension
of the ropes on the right
side is too high.
Reduce the tension of
the ropes on the right
side.
When the handle is in
the horizontal position,
it means that the string
tension is correct.
Screw the screws to
lock the strings in the
desired position.
If too much force is
required to move the
handle, loosen the
cords in both side
slightly.
If the rope tension is too
high, the handle will be
more difficult to move.
If the rope tension is too
low, the handle may get
stuck on the way.
TI-433 CCD-0006442
Rev: 05.20.2022
As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you have any questions, please do not
hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at [email protected]. Self-help tips, technical documents, product videos and a training
class schedule are available at lippert.com or by downloading the LippertNOW app.