Lithe Audio LWF1V2 User manual

Please ensure you read the entire instruction manual carefully before you commence any work.
Carefully unpack the speakers from the packaging. Please check to ensure all the parts shown
below are included.
If any parts of the speaker appear damaged, please contact your dealer/reseller immediately or
contact www.Litheaudio.com for contact details.
BOX CONTENTS
Listed below is the hardware equipment needed to install the speaker, with the addition of
a ladder to ensure the installation is done safely. A cutting template is included in the box.
PREPARATION
WI-FI CEILING
SPEAKER
CUTTING GUIDE 5M SPEAKER CABLE
SCREWDRIVER
MEASURING TAPE
PENCIL
PROTECTIVE EYEWEAR
SPEAKER CABLE
POWER ADAPTOR
CUTTING SAW
DRILL
STUD FINDER
TAPE
WIRE CUTTERS
SPEAKER GRILLE
PASSIVE CEILING SPEAKER
4
20’ DC EXTENSION
CABLE (OPTIONAL)

KNOW YOUR SPEAKER
The Lithe Audio LWF1V2 range of Wi-Fi ceiling wireless speakers have various inputs and outputs:
To connect one additional passive (Slave) speaker (Gold Plated)
To connect directly from existing Hi-Fi equipment
- To connect (as supplied) transformer
6.5” (165mm) Glass Fibre Woven/Polyproplene cone
In built over voltage, under voltage, over temperature, and short circuit protection, if there is an electrical fault,
Power input 24V/2.5A
Speaker output (Right)
RCA Input
Titanium tweeter
Stereo & Mono switch
& Wi-Fi chipset
Magnets for Cover (8)
Environmental equalizer
(+/- 3db)
LED indicator
Connection Reset Button
97mm ceiling
depth required
210mm
hole
cutout
(template
supplied)

A