Livestrong LS8.0E User manual

LS13.0ELS10.0ELS8.0E
ELLIPTICAL OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE DE L’EXERCISEUR ELLIPTIQUE
MANUAL DEL PROPIETARIO DE LA MÁQUINA ELÍPTICA
Read the ELLIPTICAL GUIDE before using this OWNER’S MANUAL.
Lire le GUIDE D’UTILISATION DE L’EXERCISEUR ELLIPTIQUE avant de se servir du présent MANUEL DU PROPRIÉTAIRE.
Lea la GUÍA DEL USUARIO DE LA MÁQUINA ELÍPTICA antes de usar este MANUAL DEL PROPIETARIO.
LS8-LS10-LS13E-OM_Rev1.3.indd 1 7/22/10 1:47 PM

23
LIVESTRONG® is a registered trademark of the Lance Armstrong Foundation.
The Lance Armstrong Foundation fights for the more than 25 million people around the world living with cancer today. There can be – and should be – life after cancer for more people. They
kick in at the moment of diagnosis, giving people the resources and support they need to fight cancer head-on. They find innovative ways to raise awareness, fund research and end the stigma
about cancer that many survivors face. They connect people and communities to drive social change, and call for state, national and world leaders to help fight this disease. Anyone, anywhere
can join the fight against cancer. Join them at LIVESTRONG.org.
INTRODUCTION
Congratulations and thank you for your purchase of this LIVESTRONG® elliptical!
Purchases of this product ensure that a minimum of $4M will go to the Lance Armstrong Foundation and the fight against
cancer.
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a LIVESTRONG® elliptical can help you
attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features
you need to get stronger and healthier, faster. Because we’re committed to designing fitness equipment from the
inside out, we use only the highest quality components. It’s a commitment we back with one of the strongest frame-
to-motor warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.
LIVESTRONG® ellipticals deliver.
ASSEMBLY
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the
elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to
the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your elliptical’s serial number located on a white barcode sticker
on the front stabilizer tube and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
WARNING
2 ENGLISH
38 FRANÇAIS
74 ESPAÑOL
SERIAL NUMBER:
EP
MODEL NAME: LIVESTRONG® ELLIPTICAL
SERIAL NUMBER LOCATION
LS8-LS10-LS13E-OM_Rev1.3.indd 2-3 7/22/10 1:47 PM

4 5
WARNING
CONSULT A PHYSICIAN PRIOR TO USING ANY
EXERCISE EQUIPMENT. POSSIBILITY OF
SERIOUS INJURY IF EQUIPMENT IS USED
IMPROPERLY. READ INSTRUCTION MANUAL
BEFORE USING. KEEP CHILDREN OFF AND
AWAY FROM THIS EQUIPMENT. FOR
CONSUMER USE ONLY.
AVERTISSEMENT
CONSULTER UN MÉDECIN AVANT D’UTILISER
CET ÉQUIPEMENT. POSSIBILITÉ DE BLESSURES
SÉRIEUSES SI L’ÉQUIPEMENT EST UTILISE DE
MANIÈRE INCORRECTE. AVANT USAGE, LIRE LE
GUIDE D’UTILISATEUR. NE PAS LAISSER CET
ÉQUIPEMENT À LA PORTÉE DES ENFANTS.
POUR USAGE DOMESTIQUE UNIQUEMENT.
PRECAUCIÓN
CONSULTAR CON UN MEDICO ANTES DE USAR ESTE
EQUIPO. POSIBILIDAD DE RESULTAR EN HERIDAS
GRAVES SI EL EQUIPO ESTÁ UTILIZADO
IMPROPIAMENTE. LEER LA GUÍA DE
INSTRUCCIONES ANTES DE USAR.MANTENER
NIÑOS PEQUEÑOS ALEJADOS DE LA MÁQUINA.ESTE
EQUIPO ES SÓLO PARA EL USO DEL CONSUMIDOR.
CAUTION AVERTISSEMENT PRECAUCIÓN
KEEP HANDS AND FEET
AWAY FROM THIS AREA.
GARDER LES MAINS ET LES
PIEDS LOIN DE CETTE REGION.
MANTENGA LAS MANOS Y LOS
PIES LEJOS DE ESTA AREA.
PIVOTING FOOT PADS
CRANK
TOP CAP
GUIDE RAIL SET
SPEAKERS
WATER BOTTLE HOLDER
UPPER HANDLEBAR
PULSE GRIPS
CONSOLE FAN
STABILIZER TUBE
POWER CORD SOCKET
MAIN FRAME
PEDAL ARM
REAR COVER
CD/MP3 PLAYER POCKET
CONSOLE
CONSOLE MAST
TOUCH PAD PANEL
AND DISPLAY WINDOWS
LOWER HANDLEBAR
MANUAL INCLINE LIFT LEVER
LOWER LINK ARM
WARNING
CONSULT A PHYSICIAN PRIOR TO USING ANY
EXERCISE EQUIPMENT. POSSIBILITY OF
SERIOUS INJURY IF EQUIPMENT IS USED
IMPROPERLY. READ INSTRUCTION MANUAL
BEFORE USING. KEEP CHILDREN OFF AND
AWAY FROM THIS EQUIPMENT. FOR
CONSUMER USE ONLY.
AVERTISSEMENT
CONSULTER UN MÉDECIN AVANT D’UTILISER
CET ÉQUIPEMENT. POSSIBILITÉ DE BLESSURES
SÉRIEUSES SI L’ÉQUIPEMENT EST UTILISE DE
MANIÈRE INCORRECTE. AVANT USAGE, LIRE LE
GUIDE D’UTILISATEUR. NE PAS LAISSER CET
ÉQUIPEMENT À LA PORTÉE DES ENFANTS.
POUR USAGE DOMESTIQUE UNIQUEMENT.
PRECAUCIÓN
CONSULTAR CON UN MEDICO ANTES DE USAR ESTE
EQUIPO. POSIBILIDAD DE RESULTAR EN HERIDAS
GRAVES SI EL EQUIPO ESTÁ UTILIZADO
IMPROPIAMENTE. LEER LA GUÍA DE
INSTRUCCIONES ANTES DE USAR.MANTENER
NIÑOS PEQUEÑOS ALEJADOS DE LA MÁQUINA.ESTE
EQUIPO ES SÓLO PARA EL USO DEL CONSUMIDOR.
CAUTION AVERTISSEMENT PRECAUCIÓN
KEEP HANDS AND FEET
AWAY FROM THIS AREA.
GARDER LES MAINS ET LES
PIEDS LOIN DE CETTE REGION.
MANTENGA LAS MANOS Y LOS
PIES LEJOS DE ESTA AREA.
PIVOTING FOOT PADS
CRANK
TOP CAP
GUIDE RAIL SET
SPEAKERS
WATER BOTTLE HOLDER
UPPER HANDLEBAR
PULSE GRIPS
CONSOLE FAN
STABILIZER TUBE
POWER CORD SOCKET
MAIN FRAME
PEDAL ARM
REAR COVER
CD/MP3 PLAYER POCKET
CONSOLE
CONSOLE MAST
TOUCH PAD PANEL
AND DISPLAY WINDOWS
LOWER HANDLEBAR
LOWER LINK ARM
LS8.0E LS10.0E
LS8-LS10-LS13E-OM_Rev1.3.indd 4-5 7/22/10 1:47 PM

6 7
WARNING
CONSULT A PHYSICIAN PRIOR TO USING ANY
EXERCISE EQUIPMENT. POSSIBILITY OF
SERIOUS INJURY IF EQUIPMENT IS USED
IMPROPERLY. READ INSTRUCTION MANUAL
BEFORE USING. KEEP CHILDREN OFF AND
AWAY FROM THIS EQUIPMENT. FOR
CONSUMER USE ONLY.
AVERTISSEMENT
CONSULTER UN MÉDECIN AVANT D’UTILISER
CET ÉQUIPEMENT. POSSIBILITÉ DE BLESSURES
SÉRIEUSES SI L’ÉQUIPEMENT EST UTILISE DE
MANIÈRE INCORRECTE. AVANT USAGE, LIRE LE
GUIDE D’UTILISATEUR. NE PAS LAISSER CET
ÉQUIPEMENT À LA PORTÉE DES ENFANTS.
POUR USAGE DOMESTIQUE UNIQUEMENT.
PRECAUCIÓN
CONSULTAR CON UN MEDICO ANTES DE USAR ESTE
EQUIPO. POSIBILIDAD DE RESULTAR EN HERIDAS
GRAVES SI EL EQUIPO ESTÁ UTILIZADO
IMPROPIAMENTE. LEER LA GUÍA DE
INSTRUCCIONES ANTES DE USAR.MANTENER
NIÑOS PEQUEÑOS ALEJADOS DE LA MÁQUINA.ESTE
EQUIPO ES SÓLO PARA EL USO DEL CONSUMIDOR.
CAUTION AVERTISSEMENT PRECAUCIÓN
KEEP HANDS AND FEET
AWAY FROM THIS AREA.
GARDER LES MAINS ET LES
PIEDS LOIN DE CETTE REGION.
MANTENGA LAS MANOS Y LOS
PIES LEJOS DE ESTA AREA.
PIVOTING FOOT PADS CRANK
TOP CAP
GUIDE RAIL SET
SPEAKERS
WATER BOTTLE HOLDER
UPPER HANDLEBAR
PULSE GRIPS
CONSOLE FAN
STABILIZER TUBE
POWER CORD SOCKET
MAIN FRAME
PEDAL ARM
REAR COVER
CD/MP3 PLAYER POCKET
CONSOLE
INCLINE LEVEL TOGGLE S
RESISTANCE LEVEL TOGGLES
CONSOLE MAST
TOUCH PAD PANEL AND DISPLAY WINDOWS
LOWER HANDLEBAR
LOWER LINK ARM
LS13.0E
TOOLS INCLUDED:
F8 mm L-Wrench
F5 mm L-Wrench
F13/15 mm Flat Wrench
FScrewdriver
F5 mm L-Wrench/Screwdriver
PARTS INCLUDED:
F1 Stabilizer Tube
F1 Guide Rail Set
F1 Manual Incline Set (LS8.0E only)
F2 Pedal Arms
F2 Lower Handlebars
F2 Upper Handlebars
F2 Lower Link Arms With Footpads
F1 Top Cap (2 pieces)
F1 Console Mast
F1 Console Mast Boot
F1 Console
F2 Handlebar Caps
F1 Water Bottle Holder
F1 Rear Cover
F2 Sets Handlebar Covers (LS13.0E only)
F2 Aero Hand Grips (LS13.0E only)
F1 LIVESTRONG.COM USB Stick
(LS10.0E, LS13.0E only)
F1 USB Cover (LS10.0E, LS13.0E only)
F1 Audio Adapter Cable
F1 Power Cord
F1 Hardware Kit
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
NEED HELP?
PRE ASSEMBLY
ALL
MODELS
LS8-LS10-LS13E-OM_Rev1.3.indd 6-7 7/22/10 1:47 PM

8 9
GUIDE RAIL SET
FLAT WASHERS (E)
SPRING WASHERS (F)
NUTS (G)
BOLTS (D)
MANUAL INCLIN E
LIFT LEVER SPRING WASHER (F)
15 mm
Qty: 4
FLAT WASHER (E)
16 mm
Qty: 4
BOLT (D)
35 mm
Qty: 4
NUT (G)
Qty: 4
SPRING WASHER (I)
18 mm
Qty: 4
FLAT WASHER (H)
20 mm
Qty: 4
BOLT (J)
25 mm
Qty: 4
ASSEMBLY STEP 1
A Open HARDWARE BAG 1.
B Attach the STABILIZER TUBE to the MAIN
FRAME using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 ARC WASHERS (C) on
each side.
BOLT (A)
30 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
ARC WASHER (C)
17 mm
Qty: 4
HARDWARE BAG 1 CONTENTS :
BOLTS (A)
SPRING WASHERS (B)
ARC WASHER S (C)
STABILIZER TU BE
MAIN FRAME
BOLTS (A)
SPRING WASHERS (B)
ARC WASHER S (C)
STABILIZER TU BE
MAIN FRAME
LS8.0E ASSEMBLY STEP 2
* This step is for LS8.0E only.
A Open HARDWARE BAG 2.
B Attach MANUAL INCLINE LIFT LEVER to GUIDE
RAIL SET using 4 BOLTS (D), 4 FLAT WASHERS
(E), 4 SPRING WASHERS (F) and 4 NUTS (G).
C Align GUIDE RAIL SET with MAIN FRAME as
shown.
D Lift up on the MANUAL INCLINE LIFT LEVER
and place it in one of the holes inside the MAIN
FRAME.
E Attach the GUIDE RAIL SET to the MAIN FRAME
using 4 BOLTS (J), 4 SPRING WASHERS (I) and
4 FLAT WASHERS (H).
LS8.0E SHOWN
LS8.0E
ALL
MODELS
LS8.0E SHOWN
LS10.0E, LS13.0E
SHOWN
HARDWARE BAG 2 CONTENTS
FLAT WASHERS (H)
SPRING WASHERS (I)
BOLTS (J)
MAIN FRAME
GUIDE RAIL SET
MANUAL INCLIN E
LIFT LEVER
LS8-LS10-LS13E-OM_Rev1.3.indd 8-9 7/22/10 1:48 PM

10 11
LS10.0E, LS13.0E ASSEMBLY STEP 2
LS10.0E
LS13.0E
ALL
MODELS
* This step is for LS10.0E, LS13.0E models only.
A Open HARDWARE BAG 2.
B Attach the GUIDE RAIL SET to the
MAIN FRAME using 4 BOLTS (F), 4
SPRING WASHERS (E) and 4 FLAT
WASHERS (D).
C Attach the GUIDE RAIL SET to the
MAIN FRAME using 4 BOLTS (G),
4 FLAT WASHERS (H), 4 SPRING
WASHERS (I) and 4 NUTS (J).
HARDWARE BAG 2 CONTENTS
FLAT WAS HERS (D)
SPRING WASHERS (E)
GUIDE RAIL SET
BOLTS (F)
MAIN FRAME
FLAT WAS HERS (H)
SPRING WASHERS (I)
NUTS (J)
BOLTS (G)
BOLT (M)
SPRING WASHER (B)
FLAT WASHER (K)
WAVY WAS HER (L)
PEDAL ARM
CRANK
PEDAL ARM WHE EL
GUIDE RAIL
CONSOLE MAST
PRE-INSTALLE D BOLTS
CONSOLE CABLE
MAIN FRAME
ASSEMBLY STEP 3
A Open HARDWARE BAG 3.
B Carefully pull the CONSOLE CABLE through
the CONSOLE MAST using the twist tie located
inside the CONSOLE MAST.
C Gently slide the CONSOLE MAST onto the
MAIN FRAME and attach CONSOLE MAST to
MAIN FRAME using PRE-INSTALLED BOLTS.
D Slide WAVY WASHER (L) over CRANK
followed by PEDAL ARM as shown. Rest
PEDAL ARM WHEEL on GUIDE RAIL.
E Attach the PEDAL ARM to the CRANK using 1
FLAT WASHER (K), 1 SPRING WASHER (B)
and 1 BOLT (M).
F Repeat steps D–E on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2
SPRING WASH ER (B)
15 mm
Qty: 2
FLAT WASHER (K)
20 mm
Qty: 2
WAVY WASHER (L)
22.5 mm
Qty: 2
HARDWARE BAG 3 CONTENTS :
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
LS10.0E, LS13.0E SHOWN
LS10.0E SHOWN
SPRING WASHER (E)
18 mm
Qty: 4
FLAT WASHER (D)
20 mm
Qty: 4
BOLT (F)
20 mm
Qty: 4
SPRING WASHER (I)
15 mm
Qty: 4
FLAT WASHER (H)
16 mm
Qty: 4
BOLT (G)
35 mm
Qty: 4
NUT (J)
Qty: 4
LS8-LS10-LS13E-OM_Rev1.3.indd 10-11 7/22/10 1:48 PM

12 13
BOLT (U)
SPRING
WASHER (B)
FLAT WASHERS (H)
FLAT WASHERS (T)
CONSOLE MAST
HANDLEBAR
CAP
LOWER HANDLEBAR
RUBBER WASHER (S)
A Open HARDWARE BAG 5.
B Slide 1 RUBBER WASHER (S) and 1 FLAT
WASHER (T) onto the CONSOLE MAST.
C Slide LOWER HANDLEBAR onto CONSOLE
MAST and attach using 1 FLAT WASHER (T),
1 FLAT WASHER (H), 1 HANDLEBAR CAP, 1
FLAT WASHER (H), 1 SPRING WASHER (B)
and 1 BOLT (U).
D Repeat steps B–C on the opposite side of the
elliptical.
BOLT (U)
20 mm
Qty: 2
SPRING WASHER (B)
15 mm
Qty: 2
FLAT WAS HER (H)
20 mm
Qty: 4
FLAT WAS HER (T)
25 mm
Qty: 4
RUBBER
WASHER (S)
26 mm
Qty: 2
HARDWARE BAG 5 CONTENTS :
SPRING WASHER (Q)
BOLT (P)
FLAT WASHER (R) WAVY WAS HER (O)
FLAT WASHERS (N)
LOWER LINK ARM
PEDAL ARM BRACKET
ASSEMBLY STEP 4
A Open HARDWARE BAG 4.
B Slide 1 FLAT WASHER (N), 1 WAVY
WASHER (O) and another FLAT WASHER
(N) onto the LOWER LINK ARM.
C Slide the LOWER LINK ARM into the
PEDAL ARM BRACKET.
D Attach the LOWER LINK ARM to the
PEDAL ARM BRACKET using 1 FLAT
WASHER (R), 1 SPRING WASHER (Q)
and 1 BOLT (P).
E Repeat steps B–D on the opposite side of
the elliptical.
FLAT
WASHER (N)
27 mm
Qty: 4
WAVY
WASHER (O)
29 mm
Qty: 2
SPRING WASHER (Q)
15.4 mm
Qty: 2
FLAT WAS HER (R)
20 mm
Qty: 2
BOLT (P)
20 mm
Qty: 2
HARDWARE BAG 4 CONTENTS :
ALL
MODELS
LS10.0E SHOWN
ALL
MODELS
ASSEMBLY STEP 5
LS10.0E SHOWN
LS8-LS10-LS13E-OM_Rev1.3.indd 12-13 7/22/10 1:48 PM

14 15
A Open HARDWARE BAG 6.
B Align end of LOWER LINK ARM with bracket on
bottom of LOWER HANDLEBAR.
C Place TEFLON WASHERS (V) on both sides of
the LOWER LINK ARM. While holding TEFLON
WASHERS (V) slide LOWER LINK ARM into
bottom end of LOWER HANDLEBAR.
D Secure the joint with 1 FLAT WASHER (W), 1
SPRING WASHER (B),1 BOLT (X) and secure
with 1 NUT (Y).
E Repeat steps B–D on the opposite side of the
elliptical.
SPRIN G WAS HER (B)
15 mm
Qty: 2
TEFLON
WASHER (V)
28.4 mm
Qty: 4
FLAT WASHER (W)
17 mm
Qty: 2
NUT (Y)
Qty: 2
BOLT (X)
70 mm
Qty: 2
HARDWARE BAG 6 CONTENTS :
BOLT (X)
FLAT WASHER (W)
NUT (Y)
LOWER HANDLEBAR
SPRING WASHER (B)
TEFLON WASHERS (V)
LOWER LINK ARM
ALL
MODELS
LS8.0E
ASSEMBLY STEP 6
LS10.0E SHOWN
LS8.0E ASSEMBLY STEP 7
CONSOLE
MAST BOOT
TOP CAP
SCREWS (Z)
REAR CAP
REAR STABILIZER
WATE R
BOTTLE
HOLDER
CONSOLE MAST
SCREWS (AA)
TOP CAP
REAR
COVER
* This step is for LS8.0E only.
A Open HARDWARE BAG 7.
B Slide TOP CAP and TOP CAP REAR COVER
over CONSOLE MAST and snap into place.
C Insert CONSOLE MAST BOOT over TOP CAP
and snap into place.
D Slide WATER BOTTLE HOLDER over
CONSOLE MAST and attach using 2
SCREWS (AA).
E Slide REAR CAP over REAR STABILIZER and
attach using 2 SCREWS (Z).
HARDWARE BAG 7 CONTENTS :
SCREW (Z)
15 mm
Qty: 2
SCREW (AA)
20 mm
Qty: 2
LS8.0E SHOWN
NOTE: Be careful not to pinch any
wires while tightening screws.
LS8-LS10-LS13E-OM_Rev1.3.indd 14-15 7/22/10 1:48 PM

16 17
CONSOLE
BOLTS (BB)
UPPER HANDLEBAR
CONSOLE CABLES
LOWER HANDLEBAR
PRE-INSTALLED
SET SCREWS
CONSOLE MAST
BOLT (BB)
12 mm
Qty: 4
HARDWARE BAG 8 CONTENTS :
NOTE: Be careful not to pinch
any wires while attaching the
console or handlebars.
A Open HARDWARE BAG 8.
B Attach the CONSOLE CABLES to the CONSOLE.
C Carefully tuck the CONSOLE CABLES into the
CONSOLE MAST before attaching the CONSOLE.
Attach CONSOLE to CONSOLE MAST using 4
BOLTS (BB).
D Slide UPPER HANDLEBAR onto LOWER
HANDLEBAR making sure handlebars are joined
together completely. Secure UPPER HANDLEBAR
to LOWER HANDLEBAR using PRE-ATTACHED
SET SCREWS.
E Repeat step D on other side.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
WATE R
BOTTLE
HOLDER
CONSOLE MAST
SCREWS (Z)
SCREWS (Z)
REAR CAP
SCREWS (AA)
REAR STABILIZER
CONSOLE
MAST
BOOT
TOP CAP
(LEFT & RIG HT)
SCREW (Z)
15 mm
Qty: 5
SCREW (AA)
20 mm
Qty: 2
HARDWARE BAG 7 CONTENTS :
LS10.0E, LS13.0E ASSEMBLY STEP 7
ALL
MODELS
ASSEMBLY STEP 8
LS10.0E SHOWN
LS8.0E, LS10.0E ASSEMBLY COMPLETE!
* This step is for LS10.0E, LS13.0E models only.
A Open HARDWARE BAG 7.
B Slide RIGHT AND LEFT TOP CAP over
CONSOLE MAST and attach using 3
SCREWS (Z).
C Slide CONSOLE MAST BOOT around
CONSOLE MAST and insert into TOP CAP.
D Slide WATER BOTTLE HOLDER over
CONSOLE MAST and attach using 2
SCREWS (AA).
E Slide REAR CAP over REAR STABILIZER
and attach using 2 SCREWS (Z).
LS10.0E
LS13.0E
LS10.0E SHOWN
LS8-LS10-LS13E-OM_Rev1.3.indd 16-17 7/22/10 1:48 PM

18 19
BOLTS (CC)
UPPER HANDLEBAR
HANDLEBAR
WIRES
AERO HAND GRIPS
HANDLEBAR COVERS
SCREWS (DD)
ELLIPTICAL OPERATION
This section explains how to use your elliptical’s console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
• LOCATION OF THE ELLIPTICAL
• POWER/GROUNDING INSTRUCTIONS
• FOOT POSITIONING
• MOVING THE ELLIPTICAL
• LEVELING THE ELLIPTICAL
• POWER/MANUAL INCLINE OPERATION
• USING THE HEART RATE FUNCTION
* This step is for LS13.0E only.
A Open HARDWARE BAG 9.
B Connect the HANDLEBAR WIRES from the
right AERO HAND GRIP to the wires from the
UPPER HANDLEBAR. Attach AERO HAND
GRIP to the UPPER HANDLEBAR using 2
BOLTS (CC).
NOTE: Be careful not to pinch any wires.
C Repeat on other side.
D Snap right HANDLEBAR COVERS over
handlebars and attach using 4 SCREWS (DD).
E Repeat on other side.
LS13.0E ASSEMBLY STEP 9
BOLT (CC)
15 mm
Qty: 4
SCREW (DD)
15 mm
Qty: 8
HARDWARE BAG 9 CONTENTS :LS13.0E ONLY
LS13.0E
LS13.0E ASSEMBLY COMPLETE!
NOTE: Be careful not to pinch
any wires while attaching the
handlebars or covers.
LS8-LS10-LS13E-OM_Rev1.3.indd 18-19 7/22/10 1:48 PM

20 21
LS8.0E LS8.0E
LS8.0E CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) LED DISPLAY WINDOWS: display time and distance during workout.
B) START: press to begin exercising, start your workout, or resume exercising after pause.
C) STOP: press to pause/end your workout. Hold for 3 seconds to reset the console.
D) LEVEL + / – : used to adjust resistance level.
E) LEVEL QUICK KEYS: used to reach desired resistance level more quickly.
F) PROGRAMMING BUTTON: used to select stage, level, time and other options.
G) CHANGE DISPLAY: press to change display feedback during workout.
H) FAN KEY: press to turn fan on and off.
I) FAN: personal workout fan.
J) SPEAKERS: music plays through speakers when your CD / MP3 player is connected to the console.
K) AUDIO IN JACK: plug your CD / MP3 player into the console using the included audio adaptor cable.
L) AUDIO OUT / HEADPHONE JACK: plug your headphones into this jack to listen to your music through the headphones.
Note: when headphones are plugged into the headphone jack the sound will no longer come out through the speakers.
M) CD / MP3 PLAYER POCKET: used to store your CD / MP3 player.
N) READING RACK: holds reading material.
LS10.0E
2 4 6 8 10 12 14 16
LEVEL QUICK KEYS
LS8.0 E
STAGE 1 STAGE 2 STAGE 3 STAGE 4 STAGE 5 STAGE 6 STAGE 7 STAGE 8 STAGE 9
MANUAL WEIGHT LOSS MUSCLE TONER STRENGTH
BUILDER
CONSTANT
WATTS
MELLOW
JOHNNY’STRAIL
LANCE’S CLIMB CUSTOM 1 CUSTOM 2
A
D
K
L
E
I
H G
J JM
N
B CF
MANUAL INCLINE OPERATION
The LS8.0E has an adjustable incline feature to add variety to your workouts. To adjust the incline up or down, stand on the side of
the elliptical and place your hand firmly on the top of the shroud. With your other hand, grab the MANUAL INCLINE LIFT LEVER,
pulling back and guiding it up or down. Ensure the pin is engaged in the slot at the preferred incline level.
LS8-LS10-LS13E-OM_Rev1.3.indd 20-21 7/22/10 1:48 PM

22 23
LS10.0E
LS10.0E CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) LED DISPLAY WINDOWS: display time and distance during workout.
B) LIVETRACK™ LCD: displays LIVETRACK™ fitness journal information.
Displays heart rate, calories, pace, level and incline during workout.
C) LIVETRACK™ CONTROLS: used to adjust LIVETRACK™ display settings.
D) START: press to begin exercising, start your workout, or resume exercising after pause.
E) STOP: press to pause/end your workout. Hold for 3 seconds to reset the console.
F) INCLINE / : used to adjust incline level.
G) LEVEL + / – : used to adjust resistance level.
H) INCLINE QUICK KEYS: used to reach desired incline percentage more quickly.
I) LEVEL QUICK KEYS: used to reach desired resistance level more quickly.
J) PROGRAMMING BUTTON: used to select stage, level, time and other options.
K) CHANGE DISPLAY: press to change display feedback during workout.
L) USB PORT: insert USB stick here to use LIVESTRONG.COM programming.
M) FAN KEY: press to turn fan on and off.
N) FAN: personal workout fan.
O) SPEAKERS: music plays through speakers when your CD / MP3 player is connected to the console.
P) AUDIO IN JACK: plug your CD / MP3 player into the console using the included audio adaptor cable.
Q) AUDIO OUT / HEADPHONE JACK: plug your headphones into this jack to listen to your music through the headphones.
Note: when headphones are plugged into the headphone jack the sound will no longer come out through the speakers.
R) CD / MP3 PLAYER POCKET: used to store your CD / MP3 player.
S) READING RACK: holds reading material.
0 %
20 %
40 %
60 %
80 %
100 %
2
4
8
12
16
20
F I T N E S S J O U R N A L S Y S T E M
HOLD TO RESET
LAST 5
WORKOUTS
WORKOUT
TOTALS
WORKOUT
STATS
PERSONAL
BEST
INCLINE QUICK KEYS LEVEL QUICK KEYS
ELEVATION
GAIN
(FEET)
TIME
DISTANCE
CALORIES
LEVEL
PACE
INCLINE
MANUAL WEIGHT
LOSS
MUSCLE
TONER
STRENGTH
BUILDER
CONSTANT
WATTS
MELLOW
JOHNNY’S
TRAIL
LANCE’S
CLIMB
LANCE’S
DESCENT
MAX
CARDIO
LIVESTRONG
.COM
CUSTOM
STAGE 1 STAGE 2 STAGE 3 STAGE 4 STAGE 5 STAGE 6 STAGE 7 STAGE 8 STAGE 9 STAGE 10 STAGE 11
LS10.0E
A
G
P
F
Q
A
C
B
L
H
N
I
M K
O OR
S
D EJ
LS10.0E
LS8-LS10-LS13E-OM_Rev1.3.indd 22-23 7/22/10 1:48 PM

24 25
LS130.0E
LS13.0E CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) LED DISPLAY WINDOWS: display time and distance during workout.
B) LIVETRACK™ LCD: displays LIVETRACK™ fitness journal information.
Displays heart rate, calories, pace, level and incline during workout.
C) LIVETRACK™ CONTROLS: used to adjust LIVETRACK™ display settings.
D) START: press to begin exercising, start your workout, or resume exercising after pause.
E) STOP: press to pause/end your workout. Hold for 3 seconds to reset the console.
F) INCLINE / : used to adjust incline level.
G) LEVEL + / – : used to adjust resistance level.
H) INCLINE QUICK KEYS: used to reach desired incline percentage more quickly.
I) LEVEL QUICK KEYS: used to reach desired resistance level more quickly.
J) PROGRAMMING BUTTON: used to select stage, level, time and other options.
K) CHANGE DISPLAY: press to change display feedback during workout.
L) USB PORT: insert USB stick here to use LIVESTRONG.COM programming.
M) FAN KEY: press to turn fan on and off.
N) FAN: personal workout fan.
O) SPEAKERS: music plays through speakers when your CD / MP3 player is connected to the console.
P) AUDIO IN JACK: plug your CD / MP3 player into the console using the included audio adaptor cable.
Q) AUDIO OUT / HEADPHONE JACK: plug your headphones into this jack to listen to your music through the headphones.
Note: when headphones are plugged into the headphone jack the sound will no longer come out through the speakers.
R) CD / MP3 PLAYER POCKET: used to store your CD / MP3 player.
S) READING RACK: holds reading material.
0 %
20 %
40 %
60 %
80 %
100 %
2
4
8
12
16
20
F I T N E S S J O U R N A L S Y S T E M
HOLD TO RESET
LAST 5
WORKOUTS
WORKOUT
TOTALS
WORKOUT
STATS
PERSONAL
BEST
INCLINE QUICK KEYS LEVEL QUICK KEYS
ELEVATION
GAIN
(FEET)
TIME
DISTANCE
CALORIES
LEVEL
PACE
INCLINE
MANUAL WEIGHT
LOSS
MUSCLE
TONER
STRENGTH
BUILDER
CONSTANT
WATTS
MELLOW
JOHNNY’S
TRAIL
LANCE’S
CLIMB
LANCE’S
DESCENT
MAX
CARDIO
LIVESTRONG
.COM
CUSTOM
STAGE 1 STAGE 2 STAGE 3 STAGE 4 STAGE 5 STAGE 6 STAGE 7 STAGE 8 STAGE 9 STAGE 10 STAGE 11
LS10.0E
A
G
P
F
Q
A
C
B
L
H
N
I
M K
O OR
S
D EJ
LS13.0E
LS8-LS10-LS13E-OM_Rev1.3.indd 24-25 7/22/10 1:48 PM

26 27
DISPLAY WINDOWS
• TIME: Shown as minutes : seconds. View the time remaining
or the time elapsed in your workout.
• DISTANCE: Shown as miles. Indicates distance traveled or
distance remaining during your workout.
• SPEED (SPD): Shown as MPH. Indicates how fast the foot
pads are moving.
• CALORIES: Total calories burned or calories remaining left to
burn during your workout.
• HEART RATE (HR): Shown as BPM (beats per minute). Used
to monitor your heart rate (displayed when contact is made with
both pulse grips).
LS8.0E DISPLAYS LS10.0E , LS13.0E DISPLAYS
F I T N E S S J O U R N A L S Y S T E M
HOLD TO RESET
LAST 5
WORKOUTS
WORKOUT
TOTALS
WORKOUT
STATS
PERSONAL
BEST
LEVEL INCLINE
• LEVEL: Shows the current level of resistance. Will be
displayed in the alphanumeric window.
• INCLINE (LS10.0E/LS13.0E ONLY): Shown as percent.
Indicates the incline level of the power ramp. Will be
displayed in the alphanumeric window.
• WATTS: Displays current user power output.
• LIVETRACK™ LCD DISPLAY (LS10.0E/LS13.0E
ONLY): When LIVETRACK™ is activated, the LIVETRACK™
information is displayed in this window. Use the four buttons
underneath the display to change display information. More
information is on page 33.
TO CLEAR SELECTION/RESET THE CONSOLE
Hold STOP key for 3 seconds.
FINISHING YOUR WORKOUT
When your workout is complete, the monitor display will flash “WORKOUT COMPLETE” and/or
beep. Your workout information will stay displayed on the console for 30 seconds and then reset.
A) QUICK START UP
Simply press START to begin working out. Time will count up from 0:00.
The resistance level will default to level 1. Incline will default to 0% (LS10.0E, LS13.0E only).
B) SELECT A STAGE
1) Use the PROGRAMMING BUTTON to select USER 1, USER 2 or GUEST and press ENTER
(LS10.0E, LS13.0E only). NOTE: if you press START before pressing ENTER, the stage will
begin and counts up from 0:00 for the Manual (STA1) and Constant Watts (STA5) stages, and
count down from 30:00 for all other stages. The level defaults to 1.
2) Select a stage using + / – and press ENTER on the PROGRAMMING BUTTON.
3) Select weight using + / – and press ENTER. (LS10.0E, LS13.0E ONLY)
4) Set time using + / – and press ENTER.
5) Select a level using + / – and press ENTER.
6) Press START to begin the stage.
GETTING STARTED
1) Check to make sure no objects are nearby that will hinder the movement of the elliptical.
2) Plug in the power cord and turn the elliptical ON. (Switch is located at the bottom-front of the elliptical.)
3) You have the following options to start your workout:
Programming Button
LS10.0E, LS13.0E
LS8.0E
LS8-LS10-LS13E-OM_Rev1.3.indd 26-27 7/22/10 1:48 PM

28 29
MANUAL: Adjust your level and incline manually during your workout
WEIGHT LOSS: Challenges with various combinations of hills and valleys
(resistance). Time-based goal with 10 difficulty levels to choose from. Black bars
represent changes in resistance level. Level 5 shown.
0
1
2
3
4
5
6
7
8
9
10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Program Segments
Resistance Level
MUSCLE TONER: : Muscle-defining workouts with 10 difficulty levels and 20
resistance levels increase strength and build solid endurance. Black bars represent
changes in resistance level. Level 5 shown.
0
1
2
3
4
5
6
7
8
9
1 2 3 4 5 6 7 8 9 10 11 12
Program Segments
Resistance Level
STRENGTH BUILDER: Program cues you to pedal forward (F) and backwards (R)
for an exciting and challenging workout (resistance levels). Time-based goal with 10
difficulty levels to choose from. Black bars represent changes in resistance level. Level
5 shown.
0
1
2
3
4
5
6
7
8
1 2 3 4 5 6 7 8 9 10 11 12
Program Segments
Resistance Level
CONSTANT WATTS:
1) Select Constant Watts program using + / – and press ENTER on the PROGRAMMING BUTTON.
2) Set time using + / – and press ENTER.
3) Select desired watts using + / – and press ENTER.
4) Press START to being the program.
PROGRAM (STAGE) INFORMATION
MELLOW JOHNNY’S TRAIL: Simulates climbing mountains by increasing and
decreasing the resistance. Time-based goal with 10 difficulty levels to choose from.
Black bars represent changes in resistance level. Level 5 shown.
0
1
2
3
4
5
6
1 2 3 4 5 6 7 8 9 10 11 12
Program Segments
Resistance Level
LANCE’S ASCENT: This high-intensity ascending cardio program gives you a solid
and varied workout with 10 different challenge levels. Black bars represent changes in
resistance level. Level 5 shown.
0
2
4
6
8
10
12
14
16
123456789101112
Program Segments
Resistance Level
LANCE’S DESCENT (LS10.0E, LS13.0E ONLY): Start strong with intense
combinations of resistance and incline as you take your strength and endurance to
the next level. Black bars represent changes in resistance level. White area represents
changes in elevation %. Level 5 shown.
0
10
20
30
40
50
60
70
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Program Segment
Elevation % (White))
0
2
4
6
8
10
12
14
16
18
20
Resistance (Black)
Resistance (black)
Elevation % (white)
MAx CARDIO (LS10.0E, LS13.0E ONLY): Keep burning fat long after your workout
with high- and low-intensity intervals that keep the heart rate up while improving
endurance and conditioning. Black bars represent changes in resistance level. White
area represents changes in elevation %. Level 5 shown.
Resistance (black)
Elevation % (white)
0
10
20
30
40
50
60
70
12345678
Program Segments
Elevation % (White)
0
4
8
12
16
20
Resistance (Black)
LS8-LS10-LS13E-OM_Rev1.3.indd 28-29 7/22/10 1:48 PM

30 31
PROGRAM (STAGE) INFORMATION CONTINUED
THE TOUR (LS13.0E ONLY): Get the ultimate cardio workout as you gradually build
to a high resistance and elevation with 10 challenge levels. Time-based goal. Black
bars represent changes in resistance level. Level 5 shown.
Resistance (black)
Elevation % (white)
0
10
20
30
40
50
60
70
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Program Segment
Elevation % (White))
0
2
4
6
8
10
12
14
16
18
20
Resistance (Black)
CUSTOM
1) Select CUSTOM stage using + / – and press ENTER on the PROGRAMMING BUTTON.
2) Use the + / – keys to select time. Press ENTER to confirm.
3) Set each resistance/incline profile by using + / – and press ENTER. Repeat for all 15 resistance/incline profiles (LS8.0E
models set resistance only).
NOTE: You may go back to the previous segment by pressing BACK on the PROGRAMMING BUTTON.
4) Press START to begin.
DATE AND CLOCK SETUP (LS10.0E, LS13.0E ONLY)
1) Enter Setup Mode: Press and hold 2 and 4 BUTTONS for 3-5 seconds.
2) Use the ENTER button to confirm settings.
3) Settings include: MONTH, DAY, YEAR, HOUR, MINUTE, and AM/PM.
4) Review Settings: You can review your settings at any time while in Setup Mode.
Use the ENTER button to scroll through settings.
5) Exit Setup Mode: To confirm the Date and Time, press and hold ENTER for 3 seconds.
6) To Reset: Simply reenter Setup Mode and adjust Date and Time to the correct setting.
LIVETRACK™ INTERACTIVE (LS10.0E, LS13.0E ONLY)
LIVESTRONG.COM USB PROGRAM INFORMATION
• Track your workouts on LIVESTRONG.COM
• Reach your goals faster with exclusive Lance-endorsed training plans
• Stay fresh and motivated with new LIVESTRONG® Fitness cardio programs
SAVING WORKOUT DATA TO USB FROM YOUR ELLIPTICAL
1) Remove the USB protective cover and insert the USB stick.
2) Select “SAVE WORKOUT” using + / – on the PROGRAMMING BUTTON. Press ENTER to confirm.
3) Select USER 1 or 2 using the + / – on the PROGRAMMING BUTTON. Press ENTER to confirm. Your last 5
workouts are now transferred to the USB stick.
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is uploading.
4) After the console confirms “UPLOAD COMPLETE,” remove USB stick and replace USB protective cover.
TRANSFERRING WORKOUT DATA TO PC/MAC FROM USB
1) Insert USB stick into an available USB port in your computer.
2) Open your computer’s internet browser and go to http://www.livestrong.com/equipment
to transfer your workout.
DOWNLOADING A NEW PROGRAM FROM LIVESTRONG.COM
1) Insert USB stick into an available USB port in your computer.
2) Open your computer’s internet browser and go to http://www.livestrong.com/equipment
to download the Peter Park created, Lance’s personal trainer, programs and workout calendar.
LS8-LS10-LS13E-OM_Rev1.3.indd 30-31 7/22/10 1:48 PM

32 33
LIVETRACK™ FITNESS JOURNAL SYSTEM
(LS10.0E, LS13.0E ONLY)
Congratulations! Research shows that those who journal their fitness
routines or workouts, on average, achieve greater success than those
who do not. Because your new elliptical is equipped with the exclusive
LIVETRACK™ Fitness Journal System, you’ve taken an important step
towards achieving your fitness goals.
LIVETRACK™ is an innovative new software program, integrated into your
elliptical console, that will allow you to track your fitness progress over time,
without the need for paper journals or logs. LIVETRACK™ allows you to
easily compare your current workout to your personal bests or your last five
workouts. With quick access to feedback like duration of workout, distance
traveled, calories burned or your overall pace, you’ll be able to quickly and
easily see the progress you’ve made. You can also track your workout
totals. By following your total number of workouts, distance, and calories,
you’ll be able to see just how far you have come. Read further to see how
LIVETRACK™ can help motivate you to enhance your performance.
SETUP
To activate LIVETRACK™ fitness journal system a user MUST be chosen
before the program begins. To select a USER 1 or 2, use the + / – KEYS
and press ENTER to confirm. All workout data will accumulate only for the
user that is chosen. NOTE: If no user is selected data will not be tracked.
RESET
Reset all recorded information for User 1 or User 2 by selecting the user
and then holding down the WORKOUT STATS/HOLD TO RESET key for
10 seconds. NOTE: This step is permanent and will delete ALL previously
accumulated data for the chosen user.
F I T N E S S J O U R N A L S Y S T E M
HOLD TO RESET
LAST 5
WORKOUTS
WORKOUT
TOTALS
WORKOUT
STATS
PERSONAL
BEST
DISTANCE
LIVETRACK™ INTERACTIVE (LS10.0E, LS13.0E ONLY)
DOWNLOADING A NEW PROGRAM TO YOUR ELLIPTICAL
1) Remove the USB protective cover and insert the USB stick.
2) Select “DOWNLOAD PROGRAM” using any + / – on the PROGRAMMING BUTTON. Press ENTER to confirm.
3) Select the desired program using any + / – on the PROGRAMMING BUTTON. Press ENTER to confirm.
4) Select memory slot 1 - 4 to save the desired program to. Press ENTER to confirm.
NOTE: If memory slot is full with a previously downloaded program, it will be overwritten with the new program.
Previous programs are available for download again from http://www.livestrong.com/equipment
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is downloading.
5) After the console confirms “DOWNLOAD COMPLETE,” remove USB stick and replace USB protective cover.
DOWNLOADING A SOFTWARE UPDATE FROM LIVESTRONG.COM
1) Insert USB stick into an available USB port in your computer.
2) Open your computer’s internet browser and go to http://www.livestrong.com/equipment
to download software updates for your console.
UPDATE ELLIPTICAL SOFTWARE
NOTE: Performing a software update will delete all previously saved information. Please save your workouts to your
USB before starting the software update. Remove the USB protective cover and insert the USB stick.
1) Turn the power switch to the OFF position (Power switch is located next to the power cord).
2) Remove the USB protective cover, insert the USB stick.
3) Turn the power switch back to the ON position.
4) Select “SOFTWARE UPDATE” using any + / – on the PROGRAMMING BUTTON. Press ENTER to confirm.
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is downloading.
5) After the console confirms “UPDATE COMPLETE,” press ENTER. It is now safe to remove the USB stick and
replace the USB protective cover.
LS8-LS10-LS13E-OM_Rev1.3.indd 32-33 7/22/10 1:48 PM

34 35
LIMITED HOME-USE WARRANTY
LIVETRACK™ FITNESS JOURNAL SYSTEM
(LS10.0E, LS13.0E ONLY)
ACCUMULATED DATA
With the LIVETRACK™ fitness journal system, you can scroll through your
accumulated data in multiple formats by pressing the LIVETRACK™ buttons. A
workout is saved when: the program ends, the console is paused and not resumed
within 5 minutes, or the STOP button is held to reset the console.
1) PERSONAL BEST: allows user to scroll through and view 5 personal
bests for all previous workouts. They are:
• Best Mile – fastest time in which the user has completed a mile
• Best 5K – fastest time in which the user has completed a 5K
• Longest Workout – (time)
• Longest Workout – (distance)
• Calories Burned – most calories user has burned in one workout
2) LAST 5 WORKOUTS: allows you to view data from your previous 5 workouts.
The following data from these 5 workouts can be scrolled through and viewed
by pressing the WORKOUT STATS key:
• Time – total time of selected workout
• Distance – total distance of selected workout
• Calories – total calories burned during selected workout
• Pace – average pace during selected workout
• Elevation Gain (feet) – total elevation climbed, in feet, during selected workout
3) WORKOUT TOTALS: allows you to view the total accumulated workout data.
Pressing the WORKOUT TOTALS key will allow you to scroll through the
following totals:
• Total Workouts
• Total Distance
• Total Calories
• Total Time
• Elevation Gain – total elevation climbed in feet
USING YOUR CD / MP3
PLAYER (ALL MODELS)
1) Connect the included AUDIO
ADAPTOR CABLE to the AUDIO
IN JACK on the top of the console
and the headphone jack on your
CD / MP3 player.
2) Use your CD / MP3 player buttons
to adjust song settings.
3) Remove the AUDIO ADAPTOR
CABLE when not in use.
4) If you don’t want to use the
SPEAKERS, you can plug your
headphones into the AUDIO OUT
JACK at the bottom of the console.
LS8-LS10-LS13E-OM_Rev1.3.indd 34-35 7/22/10 1:48 PM

36 37
WEIGHT CAPACITY
LS8.0E = 300 lbs (136 kilograms)
LS10.0E = 325 lbs (147 kilograms)
LS13.0E = 350 lbs (159 kilograms)
FRAME • LIFETIME
Manufacturer warrants the frame against defects in workmanship
and materials for the lifetime of the original owner, so long as
the device remains in the possession of the original owner. (The
frame is defined as the welded metal base of the unit and does
not include any parts that can be removed.)
BRAKE • LIFETIME
Manufacturer warrants the brake against defects in workmanship
and materials for the lifetime of the original owner, so long as the
device remains in the possession of the original owner. Labor or
installation of brake is not covered under the brake warranty.
ELECTRONICS & PARTS • LS8.0E: 1 YEAR
LS10.0E: 3 YEARS
LS13.0E: 5 YEARS
Manufacturer warrants the electronic components, finish and
all original parts for the period specified above from the date
of original purchase, so long as the device remains in the
possession of the original owner.
LABOR • LS8.0E, LS10.0E: 1 YEAR
LS13.0E: 2 YEARS
Manufacturer shall cover the labor cost for the repair of
the device for the period specified above from the date of
the original purchase, so long as the device remains in the
possession of the original owner.
ExCLUSIONS AND LIMITATIONS
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic
component, or defective part and is the sole remedy of the
warranty.
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance,
or installation of parts or accessories not originally
intended or compatible with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion,
discoloration of paint or plastic, neglect, theft, vandalism,
fire, flood, wind, lightning, freezing, or other natural
disasters of any kind, power reduction, fluctuation or failure
from whatever cause, unusual atmospheric conditions,
collision, introduction of foreign objects into the covered
unit, or modifications that are unauthorized or not
recommended by the Manufacturer.
SERVICE/RETURNS
• In-home service is available within 150 miles of
the nearest authorized Service Provider (Mileage
beyond 150 miles from an authorized service
center is the responsibility of the consumer).
• All returns must be pre-authorized by the
Manufacturer.
• Manufacturer’s obligation under this warranty
is limited to replacing or repairing, at the
Manufacturer’s option, the same or comparable
model.
• Manufacturer may request defective components
be returned to the Manufacturer upon completion
of warranty service using a prepaid return shipping
label. If you have been advised to return parts and
did not receive a label, please contact Customer
Tech Support.
• Replacement units, parts and electronic
components reconditioned to as-new condition by
the Manufacturer or its vendors may sometimes be
supplied as warranty replacement and constitute
fulfillment of warranty terms.
• This warranty gives you specific legal rights, and
your rights may vary from state to state.
• Incidental or consequential damages. the Manufacturer is not
responsible or liable for indirect, special or consequential damages,
economic loss, loss of property, or profits, loss of enjoyment or
use, or other consequential damages of whatsoever nature in
connection with the purchase, use, repair or maintenance of the
equipment. the Manufacturer does not provide monetary or other
compensation for any such repairs or replacement parts costs,
including but not limited to gym membership fees, work time lost,
diagnostic visits, maintenance visits or transportation.
• Equipment used for commercial purposes or any use other than a
single family or Household, unless endorsed by the Manufacturer
for coverage.
• Equipment owned or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement
units or labor or other costs associated with removal or
replacement of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. The
Manufacturer is not responsible or liable for any damage, loss or
liability arising from any personal injury incurred during the course
of, or as a result of any repair or attempted repair of your fitness
equipment by other than an authorized service technician. All
repairs attempted by you on your fitness equipment are undertaken
AT YOUR OWN RISK and the Manufacturer shall have no liability
for any injury to the person or property arising from such repairs.
• If you are out of the Manufacturer’s warranty but have an extended
warranty, refer to your extended warranty contract for contact
information regarding requests for extended warranty service or
repair.
LS8.0E MANUAL INCLINE • 1 YEAR
LS10.0E, LS13.0E INCLINE MOTOR • 1 YEAR
Manufacturer warrants the incline motor/manual incline
mechanism and parts against defects in workmanship and
materials for a period of one year from the date of original
purchase, so long as the device remains in the possession
of the original owner.
LS8-LS10-LS13E-OM_Rev1.3.indd 36-37 7/22/10 1:48 PM

38 39
LIVESTRONG® est une marque de commerce déposée de la Lance Armstrong Foundation.
La Lance Armstrong Foundation lutte pour plus de 25 millions de gens dans le monde entier qui vivent aujourd’hui avec le cancer. Il devrait y avoir, et il y a la vie après le cancer pour plus de
gens. La fondation est présente auprès d’eux dès qu’ils sont diagnostiqués, leur offrant le soutien et les ressources qu’ils auront besoin pour combattre le cancer de plein fouet. Elle trouve
des moyens innovateurs de sensibiliser, de financer la recherche et de mettre fin au stigmate du cancer dont font face les survivants. Elle rapproche les gens et les communautés pour créer
un changement social et fait appel à l’aide des chefs d’état, de la nation et du monde pour lutter contre cette maladie. N’importe qui, n’importe où peut se joindre à la lutte contre le cancer
sur LIVESTRONG.org.
INTRODUCTION
Félicitations et merci d’avoir acheté cet exerciseur elliptique LIVESTRONG®.
Au moins 4 M$ de la vente de ce produit seront remis à la Lance Armstrong Foundation et la lutte contre le cancer.
Que votre objectif soit de gagner des courses ou simplement d’apprécier un mode de vie plus riche et plus
sain, un exerciseur elliptique LIVESTRONG®, de qualité professionnelle, peut vous aider à l’atteindre, grâce
aux caractéristiques ergonomiques et novatrices nécessaires qu’il apporte à vos exercices pour que vous soyez
plus robuste et en meilleure santé, plus rapidement. Parce que nous nous sommes engagés à concevoir des
équipements de conditionnement physique de bout en bout, nous n’utilisons que des composants de la plus haute
qualité. C’est un engagement que nous tenons grâce à l’ensemble de garanties du châssis au moteur le plus étendu
du secteur.
Vous souhaitez l’équipement d’exercice qui offre le plus de confort, la plus grande fiabilité et le niveau de qualité
le plus élevé de sa catégorie.
Les exerciseurs elliptiques LIVESTRONG® répondent aux attentes.
ASSEMBLAGE
Le processus de l’assemblage comporte certaines étapes au cours desquelles il faut faire particulièrement attention. Il importe
de suivre les instructions d’assemblage à la lettre et de s’assurer que toutes les pièces sont bien serrées. Si on ne suit pas
correctement les instructions d’assemblage, certaines parties du cadre de l’exerciseur elliptique pourraient être mal serrées et
bouger et elles pourraient causer des bruits irritants. Pour éviter les dommages à l’exerciseur elliptique, relire les instructions
d’assemblage et prendre les mesures correctives qui s’imposent.
Avant de continuer, rechercher le numéro de série de l’exerciseur elliptique qui figure sur
un autocollant de code à barres blanc, sur le tube de stabilisation avant, et l’inscrire dans
l’espace réservé ci-dessous.
INSCRIRE LE NUMÉRO DE SÉRIE ET LE MODÈLE DANS LES CASES CI-DESSOUS :
» Indiquer le NUMÉRO DE SÉRIE et le NOM DU MODÈLE lors de tout appel de service.
NUMÉRO DE SÉRIE :
EP
MODÈLE : ExERCISEUR ELLIPTIQUE LIVESTRONG®
AVERTISSEMENT
EMPLACEMENT DU NUMéRO DE SéRIE
FRANÇAIS
LS8-LS10-LS13E-OM_Rev1.3.indd 38-39 7/22/10 1:48 PM