Living Spaces Ciara Queen User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in side rails carton .
1
Step#1
Align the headboard with the wings.Attach wings through Headboard finger tight, using
Wrench(I), Bolt (C) and Washer (E).
A
B
C
D
E
F
G
H
I
Φ8 MM
Φ8*30
MM
Φ8*50
MM
Φ6 MM
Φ8 MM
H=15CM
8PCS
4PCS
12PCS
12PC
24PCS
4PCS
4PCS
2PCS
1PC
J
K
L
M
N
P
Q
Y
Z
H=25.5
CM
Φ8*80
MM
Φ6*25
MM
Φ6*20
MM
4PCS
8PCS
8PCS
4 PCS
8 PCS
2 PCS
2 PCS
1PC
8PCS
Ciara Queen Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
2
Step#2
Screw the steel dowel (K) into the holes in front of wings.
Screw the steel dowel (K) into the holes in front of footboard.
3
Step#3
Attach side rails using Half-moon bolt (L) ,Washer (A) and Nut (Z) .Tighten/secure Nut (Z)
using Wrench (Y) until snug.
Ciara Queen Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
4
Step#4
Using Bracket (H) to connect the wings with headboard, Tighten with Wrench (I), Bolt (B)
and Washer (E).
5
Step#5
Attach bed feet (F) to Wings and Footboard.
Attach the bed feet one side at a time by gently lifting the bed and inserting the bed feet,
rotate clockwise until snug.
Ciara Queen Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
6
Step#6
please put support cleat (P) into support cleat (Q) first, then attach the support cleats to side
rails using Wrench (I), Bolt (C) and Washer (E).
Ciara Queen Assembly Instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
7
Step#7
Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (M) and
Washer (D).
Step#8
Move/place bed into final position in bedroom.
Step#9
Attach steel slat support system to full length steel side support cleats(flat side facing up).
Verify the metal slats are installed properly into support cleats and center support legs are
perpendicular to the floor for full support.
Ciara Queen Assembly Instructions