
Instruction Manual
6
USE
Before t e first usage
-Read t ese instructions before use and keep t em safe. If you give t is fan to someone, also give t em
t e instructions.
-Remove all t e packaging but retain t em till you are satisfied t at t e fan works.
-Completely unwind t e supply cord and insert t e electric plug in a eart ed plug point on t e wall.
-T e fan is now ready
1. Ensure t at t e local voltage corresponds to t e voltage of t e appliance.
2. Turn t e speed knob for selecting t e speed: 0 (off) and speeds 1, 2, 3 correspond to Low,
Medium, Hig .
3. Slope angles: by supporting t e slope protection, you can adjust t e eig t to your c oice.
4. Never touc t e blades wit ands or an object!
5. Do not pull too muc on t e cord. If it is damaged after a long use, get it repaired by an
electrician.
CLEANING AND MAINTENANCE
1. First ensure t at t e fan is off and remove t e electric plug from t e outlet.
2. Do not clean until t e appliance is completely cold.
3. Remove t e protection and t e blades carefully. Do not let t e blades fall!!
4. First use a soft clot wit a little soap for removing grease stains. T en wipe and polis wit a dry
clot . Never use a corrosive liquid w ic would damage t e paint, metal or plastic!
5. Reassemble t e fan after t e fan parts ave been dried completely. Do not connect t e fan to
power supply until it is fully reassembled.
6. Always ensure t at t e blades are returned and locked in position after cleaning and before
inserting t e plug into t e plug point.
7. Maintenance s ould be done by a qualified personnel. T e motor bearings ave been lubricated
at t e factory and s ould not require any additional lubrication.
8. Never use abrasive cleaning agents or pointy objects (for e.g. scrub brus or knife) for cleaning.
Never use a corrosive liquid w ic would damage t e paint, metal or plastic!
9. Warning : Do not submerge t e appliance in water or ot er liquids. It is a danger to life due to an
electric s ock.
10. W en t e appliance is not used, store it as well as all its accessories and t e instruction manual in
a safe and dry place.