Llitt Allan Smartbox User manual

Allan Smartbox
User Manual
Art.nr. 480021

1. Make sure the power supply is DC 12V only;
2. Don't ever disassemble or repair under any circumstances;
3. When the lamp is not used for a long time, please disconnect
the power supply;
4. Do not overload the circuit, otherwise it may cause electric
shock or fire.
Warning
1
a. You can download the App by searching Tuya Smart in mobile
app stores or scanning the following QR code.
1. Download app and Register account

2
Note:
a. Make sure the fixtures are blinking after power on, either fast or
slow, if not, power ON/OFF the Smart box by 3 times till you see
the blink.
b. If EZ mode is not working, change to AP mode(some routers
don't support EZ mode).
2.Fixture Connection
b. Open the APP, click “Sign Up” and create your account according
to the prompt.
Select Region
Mobile number/Email

3
Click “+” at the
home page “Lighting” “Lighting Source (BLE+Wi-Fi)”
EZ Mode(Easy-Connect Mode)
If you could see the rapid blinks from the
connected fixtures, click “Confirm the light is
blinking rapidly” →“Next”; If not, reset by
turning Off/On by 3 times till it appears.

4
Enter your WI-FI and password, click “Next”.
Note: Only 2.4 GHz network are supported.
Click “Done” after the connecting process is completed, now the
fixtures are added successfully.

5
AP Mode (Access Point Mode)
If you see the rapid blinking instead of slow ones,reset to AP mode
by turning OFF/ON 3 times.
Click “AP Mode”→“Confirm the light is blinking slowly”→“Next” .
Click “+” at the
home page “Lighting” “Lighting Source (BLE+Wi-Fi)”

6
Enter your WI-FI name and password, click “Next”, you'll see the
hotspot named “Smartlife-XXX” generated from the Smart box, click
“Go to Connect” .
Note: Only 2.4 GHz network are supported.
Go back to TUYA app, click “Done” after the connection process is
completed.

3.Edit Timer
Click on the Clock icon after the fixtures are added successfully, then
you can add your schedule to decide when to turn ON/OFF of your
fixtures.
7

Allan Smartbox
Elektro Elco AB Tallvägen 5, SE-564 35 Bankeryd, Sweden [e-mail], www.llitt.com