Logic PD ZOOM AM1808 EVM User manual

The following items will be used in this QuickStart Guide.
(Complete kit contents are provided on the included Packing List.)
Baseboard, AM1808 SOM-M1,
4.3” LCD (pre-assembled)
Power Supply & Cord
(use power cord specific
to your region)
USB SD Card
Reader
Demo setup.
(Setup development kit to sample OS demos.)
2Connect UI board to
baseboard connectors
at center and on the
right
5Connect WLAN
daughter card to
baseboard connector
on the right
12GUI will appear on LCD
screen (Linux demo
shown)
Important baseboard locations.
(Numbers correspond to the steps on the right.)
SD Cards
(Linux &
Windows CE
Demos)
11 Switch power on
6Connect WLAN
connector board to
baseboard connector
at the far left
User Interface (UI) Board WLAN Daughter Card,
Connector Board,
& Ribbon Cable
NOTE: Not supported in
Windows CE Demo or SDK 1Choose to use the
included UI board (go to
Step 2) or WLAN daughter
card (go to Step 5)
OR
11
2
8
10
6
2&5
8Choose OS demo and
insert SD card (slot on
bottom of baseboard)
3Secure the boards with
included screws at the
locations indicated
9Connect power cord
and supply
7Set DIP switch S7:2 and
S7:3 to the ON position;
all other switches remain
in the OFF postion
10 Connect power
to baseboard and
electric outlet
4Verify all DIP switches
are set to OFF (go to
Step 8)
4&7

ZOOM™
AM1808
EVM
QuickStart Guide
Congratulations on your purchase of the Zoom AM1808 EVM Development Kit. This
Zoom Development Kit provides a product-ready hardware and software platform for
evaluating the functionality of the Texas Instruments (TI) AM1808 processor and the Logic
PD System on Module (SOM).
For more information:
www.logicpd.com/am1808evm
www.ti.com/am1808
411 N. Washington Ave. Suite 400 Minneapolis, MN 55401
T : 612.672.9495 F : 612.672.9489 I : www.logicpd.com
©2011 Logic Product Development Company. All rights reserved.
Zoom is a trademark of Logic Product Development. Sitara is a regis-
tered trademark of Texas Instruments Incorporated. Terms and prod-
uct names in this document may be trademarks of others.
Sitara
PN 1016855A
Next Steps.
If you are having trouble accessing the demos
on the included SD cards, try the following:
+Verify that the AM1808 SOM is securely
connected to the baseboard.
+Verify that all the DIP switches are set to the
OFF position.
+Verify that the correct SD card is inserted into
the baseboard.
Troubleshooting.
To gain access to kit and SOM documentation,
register your kit on the Logic PD website at:
support.logicpd.com/auth/register_product.php
Register Your Kit
If the Linux SD card is connected to your host
PC, locate the START HERE folder on the SD
card and view setup.htm. Use the information in
setup.htm to determine the next steps specific
to your development environment.
Linux SDK
USB SD Card Reader
To prepare your workstation for software
development, power off the kit, remove the SD
card and insert into the included USB SD card
reader.
If the Windows CE SD card is connected to your
host PC, locate the START HERE folder on the
SD card and open setup.htm. NOTE: Does not
support the WLAN daughter card.
Windows CE SDK
For support questions, please contact:
support.logicpd.com/support/askaquestion.php
For community support, please visit:
www.ti.com/e2e
For more information on the TI AM1808
processor or to download the latest TI software,
visit: www.ti.com/am1808
Sample Other OS Demos
To sample the other demo OS, power off kit,
remove the SD card, and repeat Steps 8 and 11
on the previous page using the other SD card.
NOTE: The Windows CE Demo and SDK does
not support the WLAN daughter card.