Logik LHFDAB14 User manual

Red
White
Unpacking
227-8260DN-123
Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local regulations.
Quick Start Guide
DAB micro Hi-fi
LHFDAB14
AerialRemote Control
Main Unit Instruction Manual Quick Start Guide
Instruction
Manual
Quick Start Guide
Speaker x 2
You will nd that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
Tip:
Battery Replacement
Connecting to the Mains Supply General Operation
Connections
• This unit is designed to operate with an AC power supply.
• Connecting the unit to any other power source may cause
damage to the unit. Unwind the mains cable to its full length.
Connect the mains plug to a mains socket. Make sure the mains
plug is fully inserted into the mains socket. The unit is now
connected and ready to use.
• To switch the unit o completely, unplug the mains plug from
the mains socket.
Powering ON/OFF
When you rst connect the unit to the mains socket, the unit will be
in STANDBY mode.
• Press on the unit or the remote control to switch the unit to
ON mode.
• Press to switch the unit back to STANDBY mode. The Power
LED indicator will light up red.
• Disconnect the mains plug from the mains socket if you want to
switch the unit o completely.
Speaker Connections
Connect the speaker cables at the back of the speakers to the
SPEAKER (L/R) Sockets at the rear of the unit.
• When the unit is idle for approximately 15 minutes, it
will automatically switch to standby.
• Please turn the unit o completely to save energy when
not in use.
Ensure all audio connections of the unit are connected
before connecting to the mains power socket.
Thank youfor purchasing your new product.
Please follow this quick start guide for a successful rst time set up.
We recommend that you spend some time reading the instruction
manual in order to fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep the
instruction manual for future reference.
STANDBY
INFO MODE
MENU
MEM
PRESET
ENTER
REPEAT PRESET
CLOCK RANDOM TIMER
EQ INTRO SLEEP
MUTE VOLUME
SCAN
MONO/
STEREO
Remove the plastic strip from the
battery if the battery is being used
for the rst time. It is located at the
bottom rear of the remote control.
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery
release tab in the direction of
the arrow.
2. Pull out the battery holder
and remove the old battery.
3. Replace with a new battery.
4. Insert the battery holder back
into the remote control.
Using the AUX Connection
Use a 3.5mm to RCA stereo audio cable to connect the audio device’s
audio output sockets to the unit’s AUX IN socket.
R
AUXIN
L
AC
R L
Use a 3.5mm to 3.5mm stereo audio cable to connect the mobile
device’s headphone socket to the unit’s AUX IN socket.
R
AUXIN
L
AC
R
AUXIN
L
AC
R
AUDIO OUT
L3.5mm to RCA
Stereo Audio Cable
(not included)
3.5mm to 3.5mm
Stereo Audio Cable
(not included)
Audio device
Audio device
R
AUXIN
L
AC
Selecting Modes
Press MODE repeatedly to switch between DAB, FM, CD and
AUX modes.
Adjusting the Volume
• Turn the VOLUME +/– dial on the unit or press VOLUME +/– on
the remote control to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote
control. Press MUTE again or press VOLUME +/– on the remote
control or turn VOLUME +/– to resume normal listening.