Logitech Folio i5 User manual

Setup Guide
Ultrathin Keyboard Cover i5

Logitech Ultrathin Keyboard Cover i5
2
Contents
English 3
Deutsch 11
Français 19
Italiano 27
Español 35
Português 43
Nederlands 51
Svenska 59
Dansk 67
Norsk 75
Suomi 83
Ελληνικά 91
По-русски 99
Magyar 107
Česká verze 115
Po polsku 123
Eesti 131
Latviski 139
Lietuvių 147
Hrvatski 155
Srpski 163
Slovenščina 171
Slovenčina 179
Română 187
Български 195
Українська 203
Türkçe 211
219 
www.logitech.com/support 227

Logitech Ultrathin Keyboard Cover i5
English 3
Know your product
1. Protective cover
2. iPad holder
3. Keyboard
4. Function keys
5. Bluetooth® and battery status light
6. Bluetooth connect button
7. On/O switch
8. Micro-USB charging port
9. Documentation
10. Micro-USB charging cable
Setup Guide
Ultrathin Keyboard Cover i5
4 51
2
6
7
8
9
10
3

Logitech Ultrathin Keyboard Cover i5
4 English
Set up your product
1. Turn on the Keyboard Cover:
• Bluetooth discovery starts
automatically and continues
for 15 minutes. The Status light
blinks blue.
• If the Status light briefly
turns red, charge the batteries.
For more information,
see “Charge the batteries.”
2. Make sure your iPad’s Bluetooth feature
is on. Select Settings > Bluetooth > On.
3. Select “Ultrathin Keyboard Cover i5”
on the iPad’s Devices menu.
Bluetooth connection completed.
4. Place the iPad on the Keyboard Cover.

Logitech Ultrathin Keyboard Cover i5
English 5
Charge the keyboard battery
1. Plug one end of the micro-USB cable
into the charging port, and the other end
into a USB port on your computer.
Alternatively, you can use a 5V USB
charger, such as that provided with
your iPad, providing the power output
rating is at least 500mA.
The status light blinks green as
the battery charges.
2. Charge the battery until the Status light
turns solid green.
Battery information:
• A fully charged battery provides about
3 months of power when the Keyboard
Cover is used about two hours a day.
• Charge the battery when the Status
light briefly turns red after the Keyboard
Cover turns on.
• When not in use, turn o the Keyboard
Cover to conserve battery power.
• The Keyboard Cover enters sleep mode
if powered on and not used. To exit
sleep mode, press any key.
USB

Logitech Ultrathin Keyboard Cover i5
6 English
Function keys
Home = iPad Home screen
Fn + 1 = Lock screen
Locks or unlocks the iPad screen
Fn + 2 = Siri
Use your voice to send messages,
make calls, schedule meetings,
and more
Fn + 3 = Search
Launches the iPad search function
Fn + 4 = Switch applications
Fn + 5 = Virtual keyboard
Shows/hides the virtual keyboard
Fn + 7 = Previous track
Fn + 8 = Play/Pause
Fn + 9 = Next track
Fn + 0 = Mute
Fn + dash = Volume down
Fn + plus = Volume up
Fn + X = Cut
Fn + C = Copy
Fn + V = Paste
Fn + Left cursor = Select left
Selects text on the left,
word by word
Fn + Right cursor = Select right
Selects text on the right,
word by word
Switch language
Note: To select a function key, press and hold the Fn key, and then press the key indicated above.

Logitech Ultrathin Keyboard Cover i5
English 7
Use your product
Status light indications
Light Description
Blinking green The battery is charging.
Solid green The battery is fully charged (100%).
Red Battery power is low (less than 10%). Recharge the battery.
Blinking blue Fast: The keyboard cover is in discovery mode, ready for pairing.
Slow: The keyboard cover is trying to reconnect to your iPad mini.
Solid blue Bluetooth pairing or reconnection is successful.
Storing the iPad for travel
1. Lift the iPad from the Keyboard Cover.
2. Rotate the iPad, with the screen
side down, so the Home button is
on the right.
3. Place the iPad on to the Keyboard
Cover. A magnetic clip holds the iPad
in position.

Logitech Ultrathin Keyboard Cover i5
8 English
Connecting to a dierent iPad
1. Make sure the Keyboard Cover
is turned on.
2. Check that your iPad’s Bluetooth feature
is on. Select Settings > Bluetooth > On.
3. Press the Bluetooth Connect Button.
The Keyboard Cover is discoverable
for 3 min.
4. Select “Ultrathin Keyboard Cover i5”
on the iPad’s Devices menu.
Bluetooth connection completed.
5. Place the new iPad on the
Keyboard Cover.
Troubleshooting
The Keyboard Cover does not work
• Press any key to wake the Keyboard
Cover from sleep mode.
• Turn the Keyboard Cover O and then
back On.
• Recharge the internal batteries.
For more information, refer to
“Charge the batteries.”
• Re-establish the Bluetooth connection
between the Keyboard Cover and iPad:
•Verify that iPad’s Bluetooth feature
is turned on.
•Choose “Ultrathin Keyboard Cover i5”
from the Devices menu on your
iPad. The Status light briefly turns
blue after the Bluetooth connection
is made.

Logitech Ultrathin Keyboard Cover i5
English 9
Battery disposal at product end of life
1. Pry o top cover of keyboard
with screwdriver.
2. Detach battery from circuit board
and remove battery.
3. Dispose of your product and its battery
according to local laws.
What do you think?
Please take a minute to tell us.
Thank you for purchasing our product.
www.logitech.com/ithink
1 2 3

Logitech Ultrathin Keyboard Cover i5
10 English
Visit Product Central
There’s more information and support
online for your product. Take a moment to
visit Product Central to learn more about
your new Keyboard Cover.
Browse online articles for setup help,
usage tips, or information about
additional features.
Connect with other users in our Community
Forums to get advice, ask questions,
and share solutions.
At Product Central, you’ll find a wide
selection of content:
• Tutorials
• Troubleshooting
• Support community
• Software downloads
• Online documentation
• Warranty information
• Spare parts (when available)
Go to www.logitech.com/support/ultrathin-
keyboard-cover-i5