Logitech RALLY CAMERA User manual

R ALLY
Setup Guide | Guide d’installation

2
English . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . 10
Español. . . . . . . . . . . . . 17
Português . . . . . . . . . . . 24

English 3
1. Power
2. Mic Pod
3. Future Expansion
4. Connection To Display Hub
5. HDMI 1 In
6. HDMI 2 In
7. Meeting Room Computer USB
8. Future Expansion
9. Security Slot
10. Power LED
WHAT’S WHAT
TABLE HUB
10
9
12345
67
8

4English
1. Speaker
2. Power
3. Connection To Table Hub
4. HDMI 1 Out
5. HDMI 2 Out
6. Meeting Room Computer USB
7. Camera
8. Security Slot
9. Remote Control Pairing
10. Power LED
DISPLAY HUB
10
9
8
1234
567

English 5
CAMERA
1
2
4
5
6
7
3
1. Remote control pairing button
2. USB
3. Status LED
4. Security slot
5. MIPI
6. Tripod Thread
7. Expansion Slot

6English
REMOTE
5
7
6
8
9
2 3
1 4
1. Bluetooth pairing
2. Call answer
3. Call end
4. Microphone mute
5. Zoom in/out
6. Volume up/down
7. Home
8. Camera pan/tilt
9. Camera presets
After completing the installation, the system can be checked by running
the diagnostic application available at Logitech.com/support/Rally.

English 7
MAKE RALLY THEDEFAULT
DEVICE
Ensure that R ALLY is chosen as
the camera, speaker and microphone
in your video conferencing applications.
Please consult the application
documentation for further instructions
on how to do this.
STARTING A VIDEO CALL
After installing RALLY and ensuring
it is the default device in your video
conferencing application, simply start
the application in the normal manner
and enjoy the benets of improved audio
and video.
PAIRING RALLY
TO A BLUETOOTH DEVICE
You can use RALLY for audio calls
when paired to a Bluetooth device.
To pair your Bluetooth device to RALLY,
follow these simple step:
1. Press and hold the Bluetooth button
on the remote control until you see
a ashing blue light on the camera
and microphones.
2. Place your mobile device
in Bluetooth pairing mode and
select “Logitech Rally”.
3. You are now ready to use RALLY
for audio calls.

8English
PAIRING A REMOTE CONTROL
TO R ALLY
RALLY and the remote control are
paired at the factory. You can pair
up to 5 remote controls to RALLY to
make it easier to control the system
in larger rooms. Or, if you need to pair
a remote to the camera, such as when
replacing a lost remote, do the following:
1. Press and hold the button on
the camera until the LED ashes.
2. Press and hold the button on
the Display Hub until the LED ashes.
3. Press and hold the Bluetooth button
on the remote control until the LEDs
on both the camera and Display Hub
stop ashing.
4. If the pairing fails, repeat from step 1.
CAMERA SETTINGS
APPLICATION
Use this program to control the camera
pan, tilt, zoom, focus, and image quality
(like brightness and contrast) from
e software can be
www.logitech.com/

English 9
ENHANCING RALLY
There are several optional accessories that
ease installation and allow RALLY to be
used in larger rooms:
1. Rally Mounting Kit: Mounting brackets
for the Table Hub, Display Hub,
Camera and Speakers.
2. Extra Mic Pods: RALLY can support up
to 7 Mic Pods allowing great exibility
in room size and conguration.
3. Mic Pod Hub: Used to branch
microphone routing and run most of
the Mic Pod cabling is below the table.
The Mic Pod Hub has 3 jacks that can
be connected to a combination of Mic
Pods or other Mic Pod Hubs.
4. TV mount: Works with one of either
the Camera or Speaker mounting
brackets. The TV Mount can be used
in pairs to mount the Camera and
Speaker above and below the TV.
FOR MORE INFORMATION
You can nd additional information
on RALLY including:
-FAQs
-Software to enable functions
in various application
-How to order replacement parts
and more at
www.logitech.com/support/Rally

© 2020 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech Europe S.A.
and/or its a liates in the U.S. and other countries. All other tradmarks are the property of their respective owners.
Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein
issubject to change without notice.
©2020 Logitech, Logi et le logo Logitech sont des marques commerciales ou déposées de LogitechEuropeS.A.
et/ou de ses sociétés aliées aux États-Unis et dans d’autres pays. Toutes les autres marques sont la propriété
exclusive de leurs détenteurs respectifs. Logitech décline toute responsabilité en cas d’erreurs susceptibles
des’être glissées dans le présent manuel. Les informations énoncées dans ce document peuvent faire l’objet
demodications sanspréavis.
WEB-621-001374.003