Lorex CVC6997 User manual

LOREX Technology Inc.
Copyright © 2006 LOREX Technology Inc. As our
products are subject to continuous improvement,
LOREX and its subsidiaries reserve the right to mod-
ify product design, specifications and prices, without
notice and without incurring any obligation. E&OE
Quick Set-up Guide
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
VISIT
www.lorexcctv.com
4. Camera Specifications H O M E & B U S I N E S S S E C U R I T Y
LONG RANGE COLOR
DAY/NIGHT IR CAMERA
Model CVC6997
Specifications:
Dimensions:
Image Sensor 1/4” Interline transfer
type Color CCD
Effective Pixels 512H x 492V (25K Pixels)
Scanning System
Resolution
Shutter Speed
S/N Ratio
Sync. System
Min. Illumination
White Balance
Video Output
Lens
Power Supply
Current Consumption
Operating Temp
Operating Humidity
525 Lines 2:1 Interlace
Horizontal 350 TV Lines
1/60 ~ 1/10,000 sec.
More than 48dB (AGC off)
Internal
1.0Lux (without LED)
AWB
VBS 1.0Vp-p (75 ohms)
Fixed lens (3.6mm)
DC12V ±10% (regulated)
100mA (without LED) /
520mA (with LED)1
14°F ~ 113°F
(-10°~45°C)
90% RH max.

Features:
• Advanced 1/4” CCD Image Sensor with 250,000
effective pixels
• 62 IR LEDs provide illumination up to 75ft*
• Weatherproof** Design (IP67) with Removable
sunshade ideal for outdoor installations
• Color in the day, automatically switches to B/W at
night
• 3.6 mm wide angle lens
* IR Illumination range of 75ft under ideal conditions. Objects at or
beyond this range may be partially or completely obscured,
depending on the camera application.
** Not recommended for direct exposure to water, rain, or snow.
1. Package Contents 2. Installing the Video Camera 3. Connecting the Camera
1 x CVC6997 Long Range
CCD Color Day/Night IR
Camera (with 62 IR
LEDs)
1 x Heavy-Duty
Mounting Bracket /
Stand
1 x 60 ft. extension cable
1 x BNC to RCA Adaptors
1 x AC Power Adaptor
1. Attach the camera to the supplied stand.
2. Mount the camera stand to the desired mounting
surface
3. Connect the 60ft Extension cable to the camera:
The mounting stand is designed to permanently
mount the camera to a surface.
BNC (VIDEO)
(Yellow Connector)
POWER
(Black Connector)
4. Connect the BNC end of the 60ft Extension Cable
to the DVR / Observation System or to a TV/VCR.
5. Connect the A/C Power Adaptor to the 60ft Exten-
sion cable (Black connector). Plug the Power
adaptor to a wall outlet
Setup Diagram:
Connect the BNC to RCA Adaptor as needed to
allow for proper connectivity.
CAMERA
CONNECTIONS:
Connect the BNC
and Power cables to
the Camera
VIDEO INPUT
CONNECTIONS:
Connect the BNC cable to
the video input of the
monitor, and connect the
power adaptor to an
outlet.