Lorex CVC8011 Manual

Printed in KOREA
Instruction Guide
Super DNR High Resolution
Color Camera
Model : CVC8011
Super DNR High Resolution Color Camera
Model : CVC8011
Lorex Technologies Inc.

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Super DNR High Resolution Color Camera
1

2
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
3
■Contents
Features
Warnings and Precautions
Names and Functions of Parts
Installation
■Front
■Top
■Rear
4
5
9
12
9
10
11
■Lens
ㆍWhen using a CS-Mount lens (included)
ㆍWhen using a C-Mount lens
■Connecting to a monitor
■Connecting to power
12
14
14
Components 8
Camera Operation 15
■Settings 16
ㆍLENS 17
ㆍEXPOSURE 19
ㆍWHITE BALANCE 22
ㆍ DAY/NIGHT 23
ㆍ3DNR 25
ㆍSPECIAL 26
ㆍADJUST 30
ㆍRESET 30
ㆍEXIT 30
- CAM TITLE
- D-EFFECT
- MOTION
- PRIVACY
- SYNC
- LANGUAGE
- RETURN
26
28
28
29
29
30
30
Specifications 33
Limited Warranty 34
Troubleshooting 31

1/3”Super-HAD
™
II CCD
High Resolution : 560 TV Lines
Min. illumination 0.0006Lux (F1.2, 40 IRE, Sens-Up 256x)
OSD menu control
Internal / Linelock (phase control) function
Electronic day / night function, Sens-Up function (256x)
Motion adaptive digital noise reduction (3D-DNR)
Back light compensation (BLC)
Xtended Dynamic Range (XDR)
8-Zone privacy masking function (polygonal mosaic)
32x digital zoom
Remote OSD menu control (requires optional OSD remote)
Horizontal & vertical image mirroring
Auto sensing DC12V / AC24V
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period,
a fire may be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
4
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
5
■Features
Warning ■

6
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
7
■Precautions
Only use the camera under conditions
where temperatures are between
-10¡C and +50¡C. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install the camera in
extreme temperature conditions.
Do not install or use the camera in an
environment where the humidity is high.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
It can damage the CCD.
Do not expose the camera to rain
or spill beverage on it.
Do not expose the camera to
radioactivity.
Never keep the camera pointed
directly at strong light.
Do not drop the camera and protect
it to physical shocks.
Note
ㆍIf the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
ㆍPlease check that the power satisfies the normal specification before
connecting the camera.

8
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
9
■Components
Names and Functions of Parts ■
Front
①Lens protection cap
Cover the lens when not in use.
②CS-Mount lens adaptor
Attach the CS-Mount lens here.
③Back Focus clamp screw
Loosen the clamp screw with a screwdriver before adjusting the Back
Focal length.
1. COLOR BOX CAMERA
2. L-WRENCH
3. C-MOUNT ADAPTOR
9. INSTRUCTION GUIDE
4. LENS
5. MOUNTING BRACKET
6. CABLE
8. ADAPTOR
3.0~8.0mm Auto Iris DC Lens-CS Type
65ft BNC Extension Cable
12V DC 300mA Regulated Power Supply
7. BNC TO RCA ADAPTOR
①
② ③

10
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
11
■Names and Functions of Parts
Names and Functions of Parts ■
IRIS JACKOSD EXTRA
POWER
DC
VIDEO SET
VIDEO OUT
AC24V IN
DC12V IN
⑪
⑤ ⑥ ⑦⑧
⑨⑩
Rear
⑤ Auto iris lens connector
Connection terminal for an auto iris lens.
⑥ Auto iris lens selection switch
Used to change between DC or Video depending upon the type of auto
iris in use.
⑦ OSD Extra
Connect to remote controller (optional -model # ACCRC01) to do camera
set up from the ground instead of on the ladder. Also includes BNC spot
video out to connect to a service monitor.
⑧ Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
⑨ Power lamp
Lights up when the correct power is supplied to the camera.
⑩ Setting button
● SET button : Used for the menu display. This button can be used to
confirm settings after changing the value of the selected function or
current conditions.
● UP & DOWN buttons : Used for selecting items by moving the cursor
up or down on the menu screen.
● LEFT & RIGHT buttons : Used when changing item values, by moving
the cursor to the left or right on the menu screen.
⑪ Power input terminalLow voltage power connection.
Top
④Mounting Bracket
Use the screw holes provided when fixing the
camera onto a mounting bracket. Use the clamp
screw as shown in the picture.
※ The mounting bracket can be attached to either
the bottom or the top of the camera.
Be careful not to tighten the screws more than
5mm into the body, otherwise serious damage
can occur.
L
④

12
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
13
■Installation
Installation ■
The camera is supplied with a DC varifocal lens. Lenses, such as
auto iris, CS-Mount and C-Mount, are compatible with this camera.
■
Lens
Note
ㆍUsing a DC auto iris lens is recommended to achieve the best
possible results from the camera.
ㆍPlease keep the lens clean.
ㆍForeign objects or fingerprints on the lens will result in inferior image
quality, especially in low light level conditions.
1. Insert the connection plug connected to the auto iris lens cable into
the auto lens connector jack, which is located on the rear of the camera.
2. Set the lens selection switch, located on
the rear of the camera, to either DC or VIDEO,
depending on the type of auto iris lens being
used.
IRIS JACK OSD EXTRA
POWER
DC
VIDEO SET
VIDEO OUT
AC24V IN
DC12V IN
Remove the lens protection cap and attach
the CS-Mount lens to the camera by screwing it in
clockwise.
Note
ㆍUse the specified lens connection parts as shown in the picture below.
Using of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
ㆍ Using a lens which is too heavy affects the balance
of the camera and may cause a malfunction. Please
use a lens that weighs less than 450g.
ㆍSelect Av mode, if possible, when adjusting
the automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
When using a CS-Mount lens (included)
1. Remove the lens protection cap and
attach the C-mount adaptor.
2. Attach the C-Mount lens to the
camera by screwing it in clockwise.
When using a C-Mount lens

■Installation Camera Operation ■
14
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
15
AC24V IN
DC12V IN
Connect the video output terminal located on the rear of the camera
to the monitor.
ㆍThe connection method varies depending on the type of monitor and
accessories. Please refer to the monitor user manual.
ㆍTurn off the power when connecting.
■
Connecting to a monitor
Check the standard power requirement before connecting to power.
■
Connecting to power
IRIS JACK OSD EXTRA
POWER
DC
VIDEO SET
VIDEO OUT
AC24V IN
DC12V IN
AC24V IN
DC12V IN
IRIS JACK OSD EXTRA
POWER
DC
VIDEO SET
VIDEO OUT
AC24V IN
DC12V IN
POWER
Dual Power Type
(AC 24V/DC 12V, AC 24V Class2)
DC Power Type (DC 12V, 300mA)
IRIS JACK OSD EXTRA
POWER
DC
VIDEO SET
VIDEO OUT
AC24V IN
DC12V IN
POWER
■
Menu
SETUP menu
LENS (selection)
EXIT
ㆍMANUAL ㆍDC/VIDEO
EXPOSURE
ㆍSHUTTER ㆍAGC ㆍSENS-UP
ㆍBLC ㆍHSBLC ㆍD-WDR
WHITE BAL
ㆍATW ㆍAWB ㆍAWC ㆍMANUAL
DAY NIGHT
ㆍCOLOR ㆍAUTO ㆍEXT ㆍB/W
3DNR
ㆍON ㆍOFF
SPECIAL
ㆍCAMTITLE ㆍD-EFFECT ㆍRS-485
ㆍMOTION ㆍPRIVACYㆍLANGUAGE
ㆍSYNC
ㆍFACTORY RESET
RESET
ADJUST
ㆍSHARPNESS ㆍBLUE ㆍRED

SETUP
LENS DC
EXPOSURE
WHITE BAL ㅡㅡㅡ
SETUP
LENS DC
EXPOSURE
WHITE BAL ㅡㅡㅡ
DAY NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
B/W
ON
3. Set up a selected item by using the Left and Right buttons.
4. To finish and save the settings, select 'EXIT' and press the SET button.
This function is used to adjust the brightness of the screen.
1. When the SETUP menu screen is displayed on the screen, position
the cursor to point to LENS using the Up and Down buttons.
2. Select the type of lens using the Left and Right buttons.
Select the desired menu
item by using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
LENS
Note
•An item with the icon also has sub-menus. To select a sub-menu,
press the SET button.
• An item with the - - - icon has no sub-menus available for selection.
16
Super DNR High Resolution Color Camera Super DNR High Resolution Color Camera
17
■How to Use the Camera
Settings can be made using the 5 buttons located on the rear of the camera
■
Settings
IRIS JACK OSD EXTRA
POWER
DC
VIDEO
SET
VIDEO OUT
AC24V IN
DC12V IN
SET
1. Press the SET button
ㆍThe Setup menu is displayed on the monitor screen.
2. Select a menu item using the Up and Down buttons.
ㆍPlace the cursor over a desired item.
SETUP
LENS DC
EXPOSURE
WHITE BAL ㅡㅡㅡ
DAY NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
B/W
ON