
Operation Step Action Result Illustration
Press red button on
the motor
Check the
motor
direction
Check the direction of
the motor by pressing
UP or DOWN on the
switch
If correct go to set up lower
stop steps 2-4, if incorrect go
to change motor direction
step 14
2 Press DOWN button Motor rolls down
When motor gets close
to the required lower
limit, press STOP button
Motor runs step by step to
adjust lower limit accurately
The motor beeps x 1, and the
lower limit has been set.
6Press UP button Motor rolls up
When motor gets close
to the required upper
limit, press STOP button.
Motor runs step by step to set
upper limit accurately
The motor beeps x 1 and the
upper limit has been set.
R1705-RH, R1706-LH Battery Motor Instruction
Motor Torque/speed: 0.7Nm/34rpm
●Motor is combined with a wired switch and powered by a battery wand
●The side of motor mount with SETTING button should face to you
● Please replace batteries when the motor alarm sounds
1a) 1b)
2)
3) 4) 5)
6) 7)
8)
Up Button
Down Button
Confirm Button
9)