Lovencare CC 15 User manual

Instructions for Cradle
CC 15
[email protected]
www.lovencare.com.au

Congratulations on your new quality Love N Care
product from our exclusive range of baby products. This
exceptional design combines the most unique features
that any baby product offers.
We are confident that you will appreciate its many
highlights, including its reliability and durability. Your
new product has been manufactured to comply with
AS/NZS 4385:1996 and also comes with a12 month
warranty for your peace of mind.
As you will soon learn there are many more great
features about your new Love N Care product

Cradle Information
Recommended Mattress Size:
This cradle has been manufactured for use with a mattress which measures
460mm wide by 900mm long and 75mm in thickness. CAUTION:
RECOMMENDED MATTRESS SIZE. IT IS RECOMMENDED THAT THE
MATTRESS USED IN THIS ROCKING CRADLE BE A SNUG FIT AND
NOT EXCEED 75 MM IN THICKNESS.
WARNING:
•Follow the manufacturer’s assembly instructions in detail to ensure the
safety features of the rocking cradle are not compromised;
•This cradle was designed for an infant having a maximum weight of
9kg.
•Remove any tools or excess parts including plastic packaging from the
cradle vicinity after its assembly;
•Discontinue use of the rocking cradle before the infant can sit up by
itself;
•Any padding and cushioning materials, including the mattress, to be
sufficiently firm to preclude conforming to the contours of the infant’s
face;
•Ensure that the infants face is not positioned face down into the
mattress;
•Ensure that proper ventilation is maintained in and around the cradle
by limiting bed clothes, extra pillows or toys;
•Ensure the rocking cradle is placed at a reasonable distance from
curtains, blinds, heaters and power points;
•Keep medication, string, elastic, small toys or small items such as
money out of reach from any position in the rocking cradle;
•Be aware that ribbons or lace associated with bedding may entangle
the infant.

Hardware Kit Contents
Bolt X12 Castor X4 Allen Key X1 Rocking Bar X4
Cradle Components
Side panel X2 Base Panel X1 Cross Beam X1
Head Panel X2 Leg Panel X2

Stage 1 Base Section:
1. Attach cross beam to leg panels with the
four connecting bolts.
2. Gently hammer the 4 castor sleaves into
the holes provided at the bottom of the leg panels.
3. Push castors into castor sleaves.
4. Hammer the 4 rocking bars into the
nylon sleaves provided in the leg panels.
(See picture on right)
Stage 2 Cradle Section:
5. Attach the side panels to the head
panels with 4 connecting bolts.
(Make sure the nylon socket heads on end
panels are facing out, and that the grooved
side of the side panel is facing inward-see
picture on right)
6. Slide the 1 base panel into the grooves of the
side panels.
7. Attach the front panel to the side panels with
the 4 connecting bolts.
Stage 3 Finished Product:
8. Attach the cradle section to the base section by
hammering the rocking bars into the nylon sleaves
on the foot and head panels.(See picture on right)
Cradle Assembly Instructions

Another reliable product from Love N Care
Excellence |Intelligence |Caring
Contact Us:
Love N Care Pty Ltd.
297-299 Canterbury Rd, Revesby
NSW 2212 Australia
Contact No: 02 9774 4655
Fax: [phone]
Email: [email protected]
Website: www.lovencare.com.au