LPG Huber 360 FIIT User manual

32
To better respond to customer requirements and expectations, LPG Systems is constantly looking for
ways to improve the design and quality of its products. For this reason, there may be minor differences
between your equipment and the unit described in this manual.
≥WARNING
OPERATOR’S MANUAL HUBER 360®FIIT
Registered trademark
Please read this entire manual carefully
before using your device.
© LPG Systems 2015. LPG and HUBER are registered trademarks.
Reproduction, even in part, is strictly prohibited.
Keep this manual and the separate installation
instructions for future reference
GU1401 - GB
Indice C of 02/19
Congratulations on the purchase of your HUBER 360 FIIT device.
This model represents the culmination of many years of research, combining the
latest technologies with LPG’s expertise.
You can fully appreciate the technical perfection and reliability that have made
LPG Systems the leader in this field.
This operator’s manual describes how to operate the device, instructions for
periodic maintenance, and safety guidelines.
With the aim to continuously provide satisfaction, your device is equipped with
a specific software devised to ensure connection with the LPG dedicated server.
The data collected through this software will allow LPG to improve its support ans
maintenance servcie.
Your device should be used only by a professional who has completed the
manufacturer’s training provided by LPG Systems or an approved provider, if you
live outside of France.
If you have any questions about operating or maintaining your device, please
contact LPG via the Customer Service Department of your local LPG Dustributor.
Registered trademark

54
>PACKAGE CONTENTS
>One HUBER360 FIIT
>One heart rate monitor
>One tablet
>One operator’s manual
>One power cable
>One set of quick unpacking and set-up instructions
>One POS display

76
The unit can only operate if its power cable is connected to the power outlet and if the on/off switch
is turned on.
≥WARNING
>CONTENTS >DEVICE DESCRIPTION
DEVICE DESCRIPTION
1
≥
WARNING
1. DEVICE DESCRIPTION .............................................................. 7
2. CONTROLS AND ACCESSORIES ..................................................... 9
3. IMPORTANT SAFETY INFORMATION ...............................................15
4. MAINTENANCE ....................................................................18
5. TROUBLESHOOTING ...............................................................21
6. TECHNICAL SPECIFICATIONS .....................................................22
7. WARRANTY ........................................................................24
TERMS AND CONDITIONS OF THE WARRANTY ....................................24
LIMITATIONS AND EXCLUSIONS ........................................................ 26
WARRANTY FORM ....................................................................... 27
2.1 Control Screen........................................................... ...... 9
2.2 Handle...................................................................... . . 10
2.6 Heart rate monitor....................................................... .....11
2.7 Tablet .........................................................................12
3.1 Warning.............................................................. .........15
3.2 Precautions................................................. ..................16
3.3 Clearance.......................................................... ...........17
3.4 Warnings......................................................................17
4.1 Cleaning the device........................................................ ...18
4.2 Identification nameplate........................................... ...........18
4.3 Power cord............................................................... .... 20
HANDLE
MEASURING
SYSTEM
PLATFORM
BASE
EMERGENCY
STOP BUTTON
TOUCHSCREEN
INTERFACE
BLOWER
MEASURING
SYSTEM

98
>DEVICE DESCRIPTION
DEVICE DESCRIPTION
1
CONTROLS AND ACCESSORIES
2
TOUCH SCREEN
POWER INDICATOR
USB PORT
>CONTROL SCREEN
INDICATOR
POWER ON
CIRCUIT BREAKER
POWER SWITCH NO. 1
TURN ON
FIRST
CIRCUIT BREAKER
POWER SWITCH NO. 2
TURN ON
SECOND

1110
CONTROLS AND ACCESSORIES
2 2
>PLATFORM
PLATFORM LEVELPOSITIONING
MARKERS
>HANDLES 2
CONTROLS AND ACCESSORIES
>HEART RATE MONITOR
Your HUBER 360® FIIT may come with a Heart Rate Monitor that constantly
displays your heart rate.
Activate your Heart Rate Monitor by centering it on your chest.
Moisten the contact areas with water or gel. Next, follow the instructions on the
screen.
Your heart rate will appear at the lower right corner of the screen.
Heart Rate
· Display: 30 to 240 bpm
· Limit: 30 to 230 bpm
· Maximum percentage for display: 240 bpm
CARDIO BELT TO BE
POSITIONED OVER
THE HEART
The heart rate meter is designed only for casual use. It should not be used for obtaining measurements that
require professional or laboratory-quality precision.
The serial number for the heart rate meter can be found on the back of the belt.
The heart rate monitor contains a battery that cannot be disposed of with household garbage, it requires special
recycling. When the battery dies, dispose of it in an authorized location for recycling.
WARNING
≥

1312
2
CONTROLS AND ACCESSORIES
>TABLET
Your HUBER 360® FIIT may come with a tablet with which you can download and
access the HUBER 360 application.
The HUBER 360 application can be downloaded from the Play Store.
This application will allow you to create user profiles and download exercises to the
machine. It also allows you to control certain settings remotely.
Details about how to use the application are provided when you open it. To download
the HUBER 360 application, go to the Play Store.

1514
≥
IMPORTANT SAFETY INFORMATION
3 >WARNING 3
IMPORTANT SAFETY INFORMATION
• The device should never be left unattended while plugged in.
• Unplug the device when not in use for a long period of time or before installing
or removing parts.
• Carefully monitor the device when it is used by, on, or around children or
disabled individuals.
• Children should be supervised to ensure that they do not play with the
appliance.
• This device is not intended for use by persons (including children) whose
physical, sensory or mental capabilities are reduced, or persons without
experience or knowledge, unless they have benefited from the intermediary
of a person responsible for their safety, surveillance or prior instructions
concerning the use of the device.
• Never use this device if the power cord1 or outlet is damaged, if it is not working
properly, if it has been dropped, or if it has been exposed to excessive moisture.
• Return the device to the LPG Systems service center for examination and repair.
• Do not move the device by pulling on its power cord.
• Never use the device if the vents are blocked. Keep openings free of dust and
other contaminants.
• Do not drop or insert any objects into any of the openings. This could damage
the machine.
• Do not use the device on a dirt or uneven floor or in a humid or salty
environment, and do not expose it to bad weather.
• Cleaning and maintenance of the device by the user should not be performed
by unattended children.
>IMPORTANT SAFETY INFORMATION
The following safety precautions must always be observed when using an electrical
device. Read all instructions before using the device.
DANGER - TO MINIMIZE THE RISK OF ELECTRIC SHOCK:
• Always unplug the device from the power outlet after use and before cleaning it
(ensure that the power switch is off).
• Check that the voltage indicated on the nameplate matches the voltage of the power
outlet.
• The unit must be connected to a grounded outlet using the supplied power code1, in
accordance with current electrical standards. Electrical adapters must not be used
with this equipment.
• Ensure that a differencial device (SI type, detecting the DC and AC components
from a frequency inverter) is installed on the circuit upstream from the machine.
This must comply strictly with all appropriate safety regulations and restrictions.
• Ensure that the circuit-breaker rating is in correct correspondence to the HUBER
360 I (the upstream circuit breaker must be rated higher than the machine).
• The unit must be connected to a dedicated single power line.
1 Provided power cord information:
Europe VII-H05VVF3G 2,50-g25
WARNING
TO MINIMIZE THE RISK OF BURNS, FIRE,
ELECTRIC SHOCK, OR PERSONAL INJURY:

1716
>PRECAUTIONS >CLEARANCE
IMPORTANT SAFETY INFORMATION
3 3
IMPORTANT SAFETY INFORMATION
>WARNINGS
1 meter
This machine contains programs meant to guide the user in order for them to gain the best possible results
that can be expected in their case. This in no way guarantees that the therapy will be successful. Success varies
according to each user’s morphology and physiology.
It is strictly prohibited to modify your unit without the authorization of LPG.
WARNING
≥
• As with any physical training, a medical examination should be performed before using
the equipment.
• The professional should ensure that the settings (platform oscillation speed, amplitude,
activity/rest duration, etc.) are correct for the user’s morphology and physical condition.
• The equipment should be used under careful supervision by a trained professional.
• Users should warm up properly before using the equipment for exercise.
• Users should breathe regularly while exercising.
• Using this equipment with maximum effort is not recommended while the platform is
moving.
• The user should stop immediately if experiencing any discomfort during exercise.
• Do not operate the unit in unsuitable environmental conditions (see technical
specifications).
• Do not load the machine with more than the recommended weight (see technical
specifications)
• Do not move the equipment without an LPG technician being present.
• When using the articulated stool, the user’s feet should rest on the wooden platform,
not on the base of the articulated stool.
• As its name implies, the emergency shutoff button should be used only in emergencies.
• The tablet should only be used by a trained professional near the machine.
• Do not use the tablet and the user interface simultaneously when controlling the
machine.
• This symbol means “High Voltage”:
WARNING : KEEP THESE INSTRUCTIONS Provide a clearance of 1 meter all the way around the device, keeping the area
free of any objects or people.
• The equipment should not be used by anyone with heart, respiratory, neurological,
or rheumatic disease who is advised against physical activity.
• In the case of regaining fitness, maintenance and preventative activity, the patient
should be medically certified to undertake physical activity.
• Due to the risk of possible interference, it is important that the professional
ensure that the patient is not fitted with a personal medical equipment, such as a
pacemaker or a hearing aid.
• If this is the case, determine with certainty whether the equipment in question
emits a signal that may interfere with the functioning of the unit.
• The unit must not be used by someone with a medical condition unless
accompanied at all times by a qualified professional certified to the standards of the
country of use.

1918
4
MAINTENANCE
4
MAINTENANCE
>CLEANING THE DEVICE
You should clean your device as often as possible, not only for reasons of hygiene
and attractiveness, but also because cleaning helps maintain it in good working
order and prolong its life:
• Use a damp sponge to clean the outside of all covers.
• Use wipes impregnated with a bactericidal and fungicidal solution to clean the
handles.
• Use a vacuum cleaner with a narrow attachment to clean the platform and the
inside of the accessory positioning recesses.
>IDENTIFICATION NAMEPLATE (CONT.)
>IDENTIFICATION NAMEPLATE
SERIAL NUMBER
VOLTAGE AND FREQUENCY
The identification nameplate is located on the back of your device.
The nameplate indicates the voltage of the device and the serial number to
identify your device. When contacting LPG Systems customer service for a
technical problem, please provide the serial number for your HUBER 360 i.
This serial number gives you the year and month of manufacture of your device.
The letter indicates the year of manufacture: A=2010, B=2011…, E=2014,…
The two digits indicate the production month: 01=January, 02=February,
03=March…
This symbol means that the unit was sold after August 13, 2006. In conformity with
the 2002/96/EC directive, it cannot be thrown away with standard household waste but
must be disposed of in an appropriate sorted collection. When your device reaches the end
of its useful life, it must be brought to an appropriate recycling center or returned to your
dealer. By doing so, you help the environment by contributing to the conservation of natural
resources and the protection of human health.
This symbol means that some specific warnings or precautions associated with this
device are not on the label.
This symbol means, “Refer to the operator’s manual”.
This symbol means that the the maximum patient weight permitted on this equipment
is 140Kg
This symbol means store the device somewhere protected from inclement weather.
This symbol indicates temperature limits.
This symbol indicates relative humidity limits.
This symbol means ”Danger: High Voltage”
≥
The identification plate could be modified. The identification plate apposed under your device is the
approved identification plate.
WARNING

2120
TROUBLESHOOTING
5
>POWER CORD >TROUBLESHOOTING
4
MAINTENANCE
If the power cord of your device is damaged, please contact LPG Systems
Customer Service for a replacement:
LPG Systems Customer Service
[phone]
If your unit is not working properly, please run through the following checklist
before calling LPG Systems Customer Service:
• Is the unit properly connected to a power outlet?
• Is the power outlet live?
• Is the power switch in the ON position?
• Is the emergency stop button pressed? If so, turn off the power, release the
emergency stop button, and then restart the machine.
• For the symptoms listed below, stop the machine and wait 60 seconds before
restarting:
- Error message displayed on the screen;
- Screen not working;
- Excessive weight applied to the platform during exercise;
- Fault on the sensor.
Once these checks have been completed and if the problem persists, please
contact LPG Systems Customer Service or the nearest authorized dealer,
indicating the model of your unit and its serial number.
LPG Systems Customer Service
[phone]
NOTES