LPG HUBER 360 MD User manual

2
OPERATOR’S MANUAL HUBER® 360 MD
Registered trademark
Please read this entire manual carefully
before using your device.
© LPG Systems 2014. LPG and HUBER are registered trademarks.
Reproduction, even in part, is strictly prohibited.
Keep this manual and the separate installation
instructions for future reference
GU1306 - GB
Indice A of 10/14

3
To better respond to customer requirements and expectations, LPG Systems is constantly looking for
ways to improve the design and quality of its products. For this reason, there may be minor differences
between your equipment and the unit described in this manual.
≥WARNING
Congratulations on the purchase of your HUBER 360 MD device.
This model represents the culmination of many years of research, combining the
latest technologies with LPG’s expertise.
You can fully appreciate the technical perfection and reliability that have made
LPG Systems the leader in this field.
This operator’s manual describes how to operate the device, instructions for
periodic maintenance, and safety guidelines.
Your device should be used only by a professional who has completed the
manufacturer’s training provided by LPG Systems or an approved provider, if you
live outside of France, it’s not suitable for home use.
If you have any questions about operating or maintaining your device, please
contact LPG Systems Customer Service:
+33 (0)4 75 78 69 89

4
>CONTENTS
> One HUBER® 360 MD
> One set of guardrails
> One stability test chock
> One articulated stool
> Two pads
> One tablet
> One operator’s manual
> One power cable
> One set of quick unpacking and set-up instructions
> One POS display

5
≥
The manufacturer reserves the right to modify the product’s technical specifications without prior
notice. Any reproduction, even in part, is prohibited. All the illustrations in this Operator’s Manual are
non-binding.
WARNING
Depending on the version you have, basic version or full version (see
serial number on the nameplate), some protocols are not activated
and their accessories are not provided. Therefore, the paragraphs
describing them do not apply to the basic version (see the Table
below).
Accordingly, the paragraphs describing them do not concern this
version (see table on the next page).
Accessories
Guardrails √
Stability test chock √
Articulated stool √
Pads √
Tablet √

6
>CONTENTS
1. DEVICE DESCRIPTION .............................................................. 7
2. CONTROLS AND ACCESSORIES ..................................................... 9
3. IMPORTANT SAFETY INFORMATION ...............................................21
4. MAINTENANCE ....................................................................27
5. TROUBLESHOOTING ...............................................................30
6. TECHNICAL SPECIFICATIONS .....................................................31
7. WARRANTY ........................................................................33
8. APPENDIX: ELECTROMAGNETIC COMPATIBILITY .................................37
2.1 Control Screen........................................................... ...... 9
2.2 Handle...................................................................... . . 10
2.3 Platform...................................................................... 10
2.4 Pads.......................................................................... 11
2.5 Articulated stool (Hu-seat) ....................................................14
2.6 Tablet .........................................................................17
2.7 Guardrails.................................................................... 18
2.8 Stability test chock........................................................ ....19
3.1 Installation.............................................................. ......21
3.2 Warning................................................. ......................23
3.3 Precautions........................................................ ...........24
3.4 Warnings......................................................................25
3.5 Electromagnetic Compatibility............................................ ....26
4.1 Cleaning the device........................................................ ...27
4.2 Identification nameplate........................................... ...........27
4.3 Power cord............................................................... .... 29
1.1 Intended use........................................................ ........... 7
1.2 Presentation................................................. .................. 8

7
≥
>DEVICE DESCRIPTION
DEVICE DESCRIPTION
1
The HUBER 360 MD is intended for therapeutic use. It can be used for:
1. The muscle reinforcment
2. The joint mobility recovery
3. The additional therapy treatment for obesity
The machine can be used in hospitals and rehabilitation clinics by specialists and physiotherapists.
It is an independent device that cannot be combined with other machines. It should only be used by
professionals who have been specially trained by LPG Systems in its use. It is not meant to be used
at home.
HANDLE
MEASURING
SYSTEM
PLATFORM
BASE
EMERGENCY
STOP BUTTON
TOUCHSCREEN
INTERFACE
BLOWER
MEASURING
SYSTEM
The unit can only operate if its power cable is connected to the power outlet and if the on/off switch
is turned on.
WARNING

8
1 >DEVICE DESCRIPTION
DEVICE DESCRIPTION
INDICATOR
POWER ON
CIRCUIT BREAKER
POWER SWITCH NO. 1
TURN ON
FIRST
CIRCUIT BREAKER
POWER SWITCH NO. 2
TURN ON
SECOND

9
2
>CONTROL SCREEN
CONTROLS AND ACCESSORIES
ETHERNET JACK
USB PORT
AUDIO PORT
TOUCHSCREEN
POWER INDICATOR

10
2 >HANDLE
>PLATFORM
CONTROLS AND ACCESSORIES
PLATFORM LEVELPOSITIONING
MARKERS
RECESSED FOR POSITIONING ACCESSORIES

11
2
>PADS
CONTROLS AND ACCESSORIES
The HUBER 360 MD may come with two Pads that can be positioned on the platform.
FOOT ORIENTATION ANGLE
MARKER
PAD ROTATION ANGLE
MARKER
Overview
Underside
ORIENTATION MARKER ON
THE UPPER MOVEABLE SIDE
POSITIONING
PINS

12
2
≥
CONTROLS AND ACCESSORIES
>PADS (CONT.)
All operations in this section should be performed when the device is powered off.
WARNING
The Pads can be positioned on the platform in the positioning holes.
To position the Pads on the platform, you will need to align the positioning pins on
the Pads with the suitable positioning holes.
POSITIONING THE PADS:
POSITIONING HOLE

13
2
CONTROLS AND ACCESSORIES
>PADS (CONT.)
The orientation of the Pads with respect to the platform can be adjusted in
15° increments. To adjust the orientation of the Pads, you will need to unlock the
locking ring by pushing it downwards (photo 1), and then rotate the upper part of the
Pads so that the marker lines up with the proper degree of tilt (photo 2).
ORIENTATION OF FOOTINGS ON THE PAD:
The orientation of the footing can vary 0 to 90° with respect to the inclination of
the Pad. To do this, simply position the footing to the desired angle.
FOOTING
DIRECTION
ORIENTATION OF THE PADS:
PAD ROTATION
DIRECTION MARKER ON
THE MOVEABLE TOP SECTION
> PICTURE 1 > PICTURE 2

14
2
CONTROLS AND ACCESSORIES
>ARTICULATED STOOL
Your HUBER 360 MD may come with an articulated stool that can be positioned on the
platform
SEAT
ARTICULATED
STOOL TILT
ANGLE MARKER
TILT WHEEL
ADJUSTMENT
BASE
POSITIONING
PINS
Overview
Underside
LOCK NUTS
PNEUMATIC
JACK
HEIGHT ADJUSTMENT
HANDLE

15
2
CONTROLS AND ACCESSORIES
>ARTICULATED STOOL (CONT.)
To position the articulated stool on the platform, you will need to align the
positioning pins on the articulated stool with the suitable positioning holes.
POSITIONING THE ARTICULATED STOOL

16
≥
2
CONTROLS AND ACCESSORIES
>ARTICULATED STOOL (CONT.)
LOCKING THE ARTICULATED STOOL ONTO THE PLATFORM
Before use, the articulated stool must be locked onto the platform. To do this,
press the middle button until the tool is lodged into the recess,
as shown in the photos below:
Ensure that the articulated stool is properly locked before use.
All operations in this section should be performed when the device is powered off.
WARNING
TILT ANGLE TILT MARKER
The articulated stool can tilt from 0 to 15°.
To do this, turn the articulated stool’s adjustment knob to set the marker to the
desired tilt.
TILTING THE STOOL

17
2
CONTROLS AND ACCESSORIES
>TABLET
Your HUBER 360 MD may come with a tablet that lets you access the HUBER 360
application.
This application will allow you to create user profiles and download exercises to the
machine. It also allows you to control certain settings remotely.
Details about how to use the application are provided when you open it.

18
2 >GUARDRAILS
CONTROLS AND ACCESSORIES
GUARDRAILS
ATTACHMENT MECHANISMS
The HUBER 360 MD may come with two guardrails attached to the machine. These
guardrails are meant to make the machine easier to use:
Overview

19
2
POSITIONING
PINS
POSITIONING
PINS
>STABILITY TEST CHOCK
The HUBER 360 MD comes with a stability test chock that can be positioned on the
platform:
Overview:
Underside:
CONTROLS AND ACCESSORIES

20
2
CONTROLS AND ACCESSORIES
>STABILITY TEST CHOCK (CONT.)
POSITIONING THE STABILITY TEST CHOCK
The stability test chock can be positioned on the platform using the positioning
holes shown in the photo below:
POSITIONING HOLE
To position the stability test chock, align the positioning pins on the chock with
the positioning holes in the platform.

21
3
IMPORTANT SAFETY INFORMATION
>IMPORTANT SAFETY INFORMATION
The following safety precautions must always be observed when using an electrical
device. Read all instructions before using the device.
DANGER - TO MINIMIZE THE RISK OF ELECTRIC SHOCK:
• Ensure that the circuit breakers are tripped and make sure the voltage is off after
its use and before its cleaning.
• Check that the voltage indicated on the nameplate matches the voltage of the power
outlet.
1 meter
CLEARANCE: provide a clearance of 1 meter all the way around the device,
keeping the area free of any objects or people.
>INSTALLATION
Other manuals for HUBER 360 MD
1
Table of contents
Other LPG Fitness Equipment manuals